Abstract:The safety and feasibility of directly treating hyperaccumulators with heat is constrained by the substantial presence of volatile heavy metals (HMs) within these plants. The combination of acid pretreatment and heat treatment holds potential for both energy recovery from hyperaccumulators and the transfer of their HMs to specific phases. This study aimed to reveal not only the pyrolysis and gasification kinetics and products of arsenic-hyperaccumulator ( Pteris vittate L.) (PV) pretreated with HCl or H 3 PO 4 but also the migration, distribution, and leaching of HMs in products and interaction between HMs and minerals. The HCl-pretreated PV exhibited similar decomposition behaviors and mechanisms to the control PV, with a gradual decrease in overall activation energy ( E m ). In contrast, H 3 PO 4 changed the behaviors and increased E m . The relative yield of syngas and biochar rose with increased acid concentration. Given the pyrolysis and gasification-induced volatile products released at 550, 750, and 950 °C, HCl increased the relative yield of aromatic compounds and reduced the formation of ring-opening products compared with PV. Compared with HCl, H 3 PO 4 increased the emissions of aromatic compounds and ketone. HCl promoted the loss of HMs, including accelerating their volatilization from the solid phase and increasing their leaching concentration from the biochar. HMs were mostly retained in the H 3 PO 4 -pretreated PV biochar with a low leachable rate, gradually decreasing with the rising temperature. The maximum energetic performance and HM immobilizations were optimized using artificial neural networks. This study revealed plausible reaction pathways and immobilization mechanisms, involving the interactions between minerals and HMs due to Cl or P introduced by the acid pretreatment. Overall, our findings provide new insights into the pyrolysis and gasification behavior of acid-pretreated hyperaccumulator. In particular, the H 3 PO 4 pretreatment not only produced high-yield, high-quality bio-oil products with low HM content but also retained the HMs in the biochar.

Ground-Breaking and Safe Recycling of Hazardous Hyperaccumulators

Pyrolysis of Contaminated Wheat Straw to Stabilize Toxic Metals in Biochar but Recycle the Extract for Agricultural Use

High-quality Electrostatic Recycling of Waste Carbon Fiber Via Spark-Driven Shock Waves and Joule Heating

Release and Catalytic Effect of Heavy Metal during Subcritical Hydrothermal Liquefaction of Hyperaccumulator: Implications for the Recycling of Hazardous Hyperaccumulators.

Simultaneous optimizations of heavy metal immobilizations, products, temperature, and atmosphere dependency by acid pretreatment-assisted pyrolysis and gasification of hyperaccumulator ( Pteris vittate L.) biomass

Flash Reforming Pyrogenic Carbon to Graphene for Boosting Advanced Oxidation Reaction

A review on the thermochemical treatments of biomass: Implications for hydrochar production and rare earth element recovery from hyperaccumulators

Continuous and low-carbon production of biomass flash graphene

Migration and transformation of heavy metals in hyperaccumulators during the thermal treatment: a review

Trash To Treasure: Converting Plastic Waste Into A Useful Graphene Foil

Graphene environmental footprint greatly reduced when derived from biomass waste via flash Joule heating

Rare Earth Element Recovery and Hydrochar Evaluation from Hyperaccumulator by Acid Leaching and Microwave-Assisted Hydrothermal Carbonization

Re-carbon, up-carbon, de-carbon: Plasma-electrified roll-to-roll cleaner production of vertical graphenes and syngas from greenhouse gas mixes

A review on the thermal treatment of heavy metal hyperaccumulator: Fates of heavy metals and generation of products

Battery metal recycling by flash Joule heating

Ecological Risk Analysis of the Solid Residues Collected from the Thermal Disposal Process of Hyperaccumulator Pteris Vittata Including Heavy Metals and Environmentally Persistent Free Radicals.

Attempts to obtain clean biochar from hyperaccumulator through pyrolysis: Removal of heavy metals and transformation of phosphorus

Mineralization of Captured Per- and Polyfluoroalkyl Substances (PFAS) at Zero Net Cost Using Flash Joule Heating

Feasibility and risk assessment of heavy metals from low-temperature magnetic pyrolysis of municipal solid waste on a pilot scale

Upcycling of Waste Plastic into Hybrid Carbon Nanomaterials

Recycling of hazardous jarosite residues based on hydrothermal crystal transformation