Ultra-fast Catalytic Hydrodechlorination of Chloroacetic Acids over Pd Catalyst Supported on CeO2 with Exposed (1 1 0) Plane

Binyu Guo,Xiyang Niu,Jiaojiao Yang,Lei Li,Quanyuan Chen,Juan Zhou

DOI: https://doi.org/10.1016/j.cej.2023.145126

IF: 15.1

2023-01-01

Chemical Engineering Journal

Abstract:Chloroacetic acids could be hydrodechlorinated to acetic acid effectively and the Pd catalyst supported on CeO2 (1 1 0) plane had the optimum activity.

What problem does this paper attempt to address?

Reductive Removal of Chloroacetic Acids by Catalytic Hydrodechlorination over Pd/ZrO2 Catalysts

Juan Zhou,Yuxiang Han,Wenjuan Wang,Zhaoyi Xu,Haiqin Wan,Daqiang Yin,Shourong Zheng,Dongqiang Zhu

DOI: https://doi.org/10.1016/j.apcatb.2013.01.005

2013-01-01

Abstract:Chloroacetic acids are common disinfection byproducts in drinking water and are of significant concern due to their strong carcinogenic, mutagenic and hepatotoxic effects. In the present study, the catalytic hydrodechlorination of chloroacetic acids (monochloroacetic acid, dichloroacetic acid and trichloroacetic acid) was investigated over supported Pd catalysts on SiO2, ZrO2, and activated carbon (AC) prepared by the impregnation method (denoted as im-Pd/support) and/or the deposition-precipitation method (denoted as dp-Pd/support). The catalysts were characterized by X-ray diffraction, transmission electron microscopy, measurement of point of zero charge, N2 adsorption–desorption isotherm, H2 chemisorption, and X-ray photoelectron spectroscopy. Characterization results showed that the points of zero charge of the supports varied. In contrast to im-Pd/ZrO2, strong metal–support interaction was identified in dp-Pd/ZrO2. Accordingly, im-Pd/ZrO2 was found to be more active than im-Pd/AC and im-Pd/SiO2, and dp-Pd/ZrO2 exhibited higher catalytic activity than im-Pd/ZrO2. Complete dechlorination of chloroacetic acids to acetic acid could be achieved on dp-Pd/ZrO2 within 120min of hydrodechlorination. The hydrodechlorination rate constants of trichloroacetic acid, dichloroacetic acid, and monochloroacetic acid over dp-Pd(1.74)/ZrO2 were 0.22, 0.16, and 0.044min−1, respectively, reflecting an increase in dechlorination activity with increasing number of chlorine atoms in chloroacetic acids. It was further demonstrated that the catalytic hydrodechlorination was accomplished via a combined stepwise and concerted pathway for both trichloroacetic acid and dichloroacetic acid.
STUDY ON THE CATALYST OF Pd/C IN THE PURIFICATIONOF CHLOROACETIC ACID

li fuxiang,meng xin,lv zhiping,xue jianwei,yuan xiaofang

DOI: https://doi.org/10.3969/j.issn.1004-4248.2003.01.022

2003-01-01

Abstract:A new process of production of high-purity monchloroacetic acid from chlorination liquor of acetic acid by hydrodechiorination under the existence of Pd/C catalyst has been developed.This paper describes the screening of catalysis and factors affecting hydrodechlorination reaction. The results show that the content of monochloroacetic acid reaches to 99.36%,when the mass ratio of Pd/C is 0.75,the reaction temperature is 140 ℃,the reaction time is 4 h,the volume velocity of hydrogen is 30 mL/min,and the amount of catalyst is 1 2 g catalyst per 6 g materials.
Synergy of Metal–support Interaction and Positive Pd Species Promoting Efficient C–Cl Bond Activation on Pd-based Ce-MOF-derived Catalysts

Xiao-Jie Hu,Yu-Han Sun,Ling-Yue Liu,Dan-Jun Mao,Shou-Rong Zheng

DOI: https://doi.org/10.1007/s12598-024-02826-2

IF: 6.318

2024-01-01

Rare Metals

Abstract:Monochloroacetic acid (MCAA) is identified as a highly carcinogenic disinfection by-product in chlorinated drinking water. In this study, a series of CeO2-supported Pd catalysts (Pd/MCeO2) were synthesized through one-step calcination of Pd-loaded Ce-UiO-66-BDC (Ce-MOF), and the liquid-phase catalytic hydrodechlorination of MCAA was explored using these catalysts. For comparison, Pd/CeO2 catalysts were additionally synthesized using the conventional impregnation method. The characterization results reveal that the catalysts exhibit strong metal–support interaction, leading to high Pd dispersion and Pdn+ content. Additionally, the calcination temperature significantly influences catalytic performance, with the catalyst calcined at 500 °C (Pd/MCeO2-500) demonstrating the highest catalytic activity and achieving complete dechlorination of MCAA within 50 min. Furthermore, it is found that the catalytic MCAA hydrodechlorination using the catalysts adheres to the Langmuir–Hinshelwood model. Accordingly, low reaction pH is favorable for the catalytic hydrodechlorination of MCAA, enhancing MCAA adsorption on the catalyst surface due to the electrostatic interaction between MCAA and the catalyst surface. Theoretical results suggest that the presence of Pdn+ efficiently facilitates MCAA adsorption and C–Cl cleavage, thus significantly enhancing the liquid-phase catalytic hydrodechlorination.
Effective liquid phase hydrodechlorination of diclofenac catalysed by Pd/CeO2

ke wu,xiaojun qian,liangyan chen,zhaoyi xu,shourong zheng,dongqiang zhu

DOI: https://doi.org/10.1039/c4ra16674d

IF: 4.036

2015-01-01

RSC Advances

Abstract:Palladium catalysts supported on Al2O3, activated carbon (AC), SiO2 and CeO2 were prepared using the impregnation and deposition-precipitation methods. The liquid phase catalytic hydrodechlorination of diclofenac on the catalysts was investigated, and the toxicity of the original and treated diclofenac solutions was evaluated using Daphnia magna. Characterization results indicated that the Pd catalyst supported on CeO2 had a higher Pd dispersion than those supported on Al2O3, AC and SiO2. The binding energy of Pd 3d(5/2) in Pd/CeO2 was higher than Pd/Al2O3 with a similar Pd loading amount. Additionally, for Pd/CeO2 prepared by the deposition-precipitation method the binding energy of Pd 3d(5/2) slightly decreased with the Pd loading amount. As for catalytic diclofenac reduction, Pd/SiO2 exhibited a nearly negligible catalytic activity, whereas diclofenac concentration decreased by 100, 86, and 29% within 50 min of reaction on Pd/CeO2, Pd/Al2O3, and Pd/AC, respectively, indicative of a catalytic activity order of Pd/CeO2 > Pd/Al2O3 > Pd/AC > Pd/SiO2. The hydrodechlorination of diclofenac on Pd/CeO2 could be well described using the Langmuir-Hinshelwood model. Diclofenac hydrodechlorination processed via a combined stepwise and concerted pathway, and increasing Pd loading amount in Pd/CeO2 favoured the concerted pathway. In comparison with original diclofenac, catalytic hydrodechlorination of diclofenac led to markedly decreased toxicity to Daphnia magna.
Simultaneous Removal of Monochloroacetic Acid and Bromate by Liquid Phase Catalytic Hydrogenation over Pd/Ce1−xZrxO2

Juan Zhou,Ke Wu,Wenjuan Wang,Yuxiang Han,Zhaoyi Xu,Haiqin Wan,Shourong Zheng,Dongqiang Zhu

DOI: https://doi.org/10.1016/j.apcatb.2014.06.041

2014-01-01

Abstract:Palladium catalysts supported on ZrO2, CeO2 and CeO2-ZrO2 solid solutions were prepared using the deposition-precipitation method, and individual and simultaneous reduction of monochloroacetic acid (MCAA) and bromate by liquid-phase catalytic hydrogenation on these catalysts was investigated. The catalysts were characterized by N-2 adsorption-desorption, X-ray diffraction, measurement of point of zero charge, X-ray photoelectron spectroscopy and CO chemisorption. Characterization results showed that CeO2-ZrO2 solid solutions with varied Ce/Zr ratios had nearly identical points of zero charge to those of ZrO2 and CeO2. For supported Pd catalysts, the binding energy of Pd 3d(5/2) of Pd/CeO2 was found to be higher than that of Pd/ZrO2, indicative of a stronger metal-support interaction in the former. Given a similar Pd loading, Pd dispersion of PcI/Ce1-xZrxO2 first increased and then decreased with CeO2 content, and the highest Pd dispersion was observed on Pd(0.86)/Ce0.8Zr0.2O2. Accordingly, Pd/Ce1-xZrxO2 exhibited much higher catalytic activities than Pd/ZrO2 at a Pd loading amount of around 0.85 wt.%, and the highest activity was identified on Pd(0.86)/Ce0.8Zr0.2O2 for individual reduction of bromate and MCAA. The turnover frequencies of Pd(0.86)/Ce0.8Zr0.2O2 for the reduction of bromate and MCAA were 0.69 and 0.23 s(-1), respectively, which were one order of magnitude higher than the supported Pd catalysts previously reported. For the simultaneous reduction of MCAA and bromate, the presence of bromate completely suppressed MCAA reduction on Pd(0.85)/ZrO2, while both MCAA and bromate could be effectively reduced on Pd(0.86)/Ce0.8ZrO0.2O2. Additionally, the simultaneous reduction of bromate and MCAA proceeded via a competitive reaction mechanism, and the reduction rate of bromate or MCAA was negatively correlated to the competitor concentration. (C) 2014 Elsevier B.V. All rights reserved.
Elimination of 1,2-dichloroethane over (Ce, Cr)xO2/Nb2O5 catalysts: synergistic performance between oxidizing ability and acidity

Jie Wan,Peng Yang,Xiaolin Guo,Renxian Zhou

DOI: https://doi.org/10.1016/S1872-2067(18)63203-6

IF: 16.5

2019-01-01

Chinese Journal of Catalysis

Abstract:A series of (Ce, Cr)xO2/Nb2O5 catalysts with different (Ce, Cr)xO2 to Nb2O5 mass ratios were synthesized by the deposition-precipitation method for use in deep catalytic oxidation of 1,2-dichloroethane (DCE), which is one of the typical chlorinated volatile organic compound pollutants. The textural properties were characterized by X-ray diffraction, N2 adsorption/desorption isotherms, UV-Raman spectroscopy, and scanning electron microscopy. The surface acidity and the redox properties were characterized by ammonia temperature-programmed desorption and H2 temperature-programmed reduction, respectively. The results show that the addition of a proper amount of (Ce, Cr)xO2 over Nb2O5 significantly improves the intrinsic catalytic activity towards the deep oxidation of DCE, and only a very small amount of C2H3Cl is detected as the byproduct of the oxidation process. Further study reveals the existence of an obvious synergistic effect between Nb2O5, with abundant strong acid sites, and (Ce, Cr)xO2, with strong oxidation sites, as the strong acid sites of Nb2O5 promote the adsorption and dehydrochlorination of DCE, while the strong oxidation sites of (Ce, Cr)xO2 contribute to the deep oxidation of the reactant, intermediates, and byproducts.
Unveiling the efficient state of Pd catalyst for robust electrocatalytic hydrodechlorination

Shuyuan Xu,Bingbao Mei,Fengjiao Li,Jianing Mao,Changxing Huang,Yufeng Yan,Ningning Chen,Yinghua Xu,Meiqin Shi

DOI: https://doi.org/10.1088/1361-6528/aceb6b

IF: 3.5

2023-07-30

Nanotechnology

Abstract:The application of electrochemical hydrodechlorination has been impeded due to the low utilization and activity of Pd catalyst. Herein, a series of Pd catalysts were prepared via the controllable evolution of Zn state during the pyrolysis of ZIF-8 nanosheet. Various forms of Pd with different chemical surroundings were generated upon the combined use of galvanic displacement and ion exchange process. Electrocatalytic hydrodechlorination of 4-chlorophenol was performed and the EHDC efficiency of Pd/CN reaches 100 % within 3 h at extra low Pd concentration. The coexistence of zero-valent Pd (Pd 0 ) and nitrogen coordinated Pd (Pd-N) was verified by XAFS which provide multiple active sites for focusing on adsorbing H* and cracking C-Cl respectively. The synergetic effect between different chemical state of Pd for efficient hydrodechlorination of chloroaromatics and scheme for dexterous preparation of Pd based electrocatalyst are proposed and discussed.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
HCl-Tolerant HxPO4/RuOx-CeO2 Catalysts for Extremely Efficient Catalytic Elimination of Chlorinated VOCs.

Qiguang Dai,Kai Shen,Wei Deng,Yuanpu Cai,Jiaorong Yan,Jinyan Wu,Limin Guo,Rui Liu,Xingyi Wang,Wangcheng Zhan

DOI: https://doi.org/10.1021/acs.est.0c08256

IF: 11.4

2021-01-01

Environmental Science & Technology

Abstract:Bulk metal doping and surface phosphate modification were synergically adopted in a rational design to upgrade the CeO2 catalyst, which is highly active but easily deactivated for the catalytic oxidation of chlorinated volatile organic compounds (Cl-VOCs). The metal doping increased the redox ability and defect sites of CeO2, which mostly promoted catalytic activity and inhibited the formation of dechlorinated byproducts but generated polychlorinated byproducts. The subsequent surface modification of the metal-doped CeO2 catalysts with nonmetallic phosphate completely suppressed the formation of polychlorinated byproducts and, more importantly, enhanced the stability of the surface structure by forming a chainmail layer. A highly active, durable, and selective catalyst of phosphate-functionalized RuOx-CeO2 was the most promising among all the metal-doped (Ru, Pd, Pt, Cr, Mn, Fe, Co, and Cu) CeO2 catalysts investigated owing to the prominent chemical stability of RuOx and its superior versatility in the catalytic oxidation of different kinds of Cl-VOCs and other typical pollutants, including dimethyl sulfide, CO, and C3H8. Moreover, the chemical stability of the catalyst, including its bulk and surface structural stability, was investigated by combining intensive treatment with HCl/H2O or HCl with subsequent ex situ ultraviolet-visible light Raman spectroscopy and confirmed the superior resistance to Cl poisoning of the phosphate-functionalized RuOx-CeO2. This work exemplifies a promising strategy for developing ideal catalysts for the removal of Cl-VOCs and provides a catalyst with the superior catalytic performance in Cl-VOC oxidation to date.
The electrocatalytic dechlorination of chloroacetic acids at electrodeposited Pd/Fe-modified carbon paper electrode

Angzhen Li,Xu Zhao,Yining Hou,Huijuan Liu,Liyuan Wu,Jiuhui Qu

DOI: https://doi.org/10.1016/j.apcatb.2011.11.016

2012-01-01

Abstract:Pd/Fe-modified carbon paper (Pd/Fe-C) electrode was prepared from PdCl2 and FeSO4 via electrodeposition onto carbon paper. It was observed that the diameters of electrodeposited Pd/Fe particles were around 20nm with a uniform distribution on carbon paper, which is smaller than Pd/Fe particles of impregnated and calcined electrode. The electrodeposited Pd/Fe-C electrode exhibited higher activity in dechlorination of chloroacetic acids than impregnated and calcined electrode. Under optimal experiment conditions of Pd:Fe molar ratio of 2:1 at −1.5V (vs SCE), 95% of trichloroacetic acid (TCAA) with the initial concentration of 500μg/L was removed within 20min at pH 3. The dechlorination of chloroacetic acids followed the order of TCAA>dichloroacetic acid (DCAA)>monochloroacetic acid (MCAA). MCAA cannot be dechlorinated at C and Fe-C electrodes via direct reduction. However, a part of chloroacetic acids was directly dechlorinated to acetic acid at Pd-C and Pd/Fe-C electrodes via indirect reduction. The Pd(0) and Pd(II) species were detected by X-ray photoelectron spectroscopy. Compared with the individual Pd-C electrode, in situ formation of Fe(0) decreased the interface impedance as observed by electrochemical impedance spectroscopy analysis. In conclusion, the presence of Pd(0) nanoparticles played a significant role in forming atomic H* to realize indirect reduction process which could achieve the complete dechlorination of chloroacetic acids.
Highly Selective Hydrodechlorination of 1,2-Dichloroethane to Ethylene over Ag-Pd/Zro(2) Catalysts with Trace Pd

Yuxiang Han,Jingya Sun,Heyun Fu,Xiaolei Qu,Haiqin Wan,Zhaoyi Xu,Shourong Zheng

DOI: https://doi.org/10.1016/j.apcata.2016.03.017

2016-01-01

Abstract:Gas-phase catalytic hydrodechlorination is one of the most efficient and economic methods for the removal of volatile chlorinated alkanes. Novel Ag-based bimetallic catalysts with high ethylene selectivities were prepared using the co-impregnation method. The catalysts were characterized by X-ray diffraction, UV-vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy and IR spectroscopy of CO adsorption. The catalytic performance, in particular the selectivities of the catalysts was examined on hydrodechlorination of 1,2-dichloroethane. Two supported monometallic catalysts (Ag/ZrO2 and Pd/ZrO2) were included as comparative catalysts. Ag/ZrO2 exhibited a low 1,2-dichloroethane coversion and high chloroethylene selectivity for the gas-phase hydrodechlorination of 1,2-dichloroethane, while Pd/ZrO2 had a high conversion and ethane selectivity. In contrast to monometallic catalysts, Ag-Pd/ZrO2 with trace Pd had substantially enhanced ethylene selectivity, and the bimetallic catalyst with a Pd loading amount of 0.099 wt.% (denoted as Ag(1.99)-Pd(0.099)/ZrO2) exhibited nearly 100% ethylene selectivity. The excellent ethylene selectivity can be attributed to the highly dispersed metallic Pd in Ag particles of Ag(1.99)-Pd(0.099)/ZrO2 as evidenced by the IR spectra of CO adsorption. The findings in this study indicate that Ag-Pd/ZrO2 with trace Pd can be used as promising catalyts for highly effective and selective hydrodechlorination of volatile chlorinated alkanes. (C) 2016 Elsevier B.V. All rights reserved.
Electrocatalytic Dechlorination of 2,4-Dichlorobenzoic Acid Using Different Carbon-Supported Palladium Moveable Catalysts: Adsorption and Dechlorination Activity

Jiasheng Zhou,Zimo Lou,Kunlun Yang,Jiang Xu,Yizhou Li,Yuanli Liu,Shams Ali Baig,Xinhua Xu

DOI: https://doi.org/10.1016/j.apcatb.2018.11.052

2019-01-01

Abstract:In the present study, carbon black (CB), multi walled carbon nanotubes (MWCNTs), and granular activated carbon (GAC) were employed to support palladium (Pd) catalyst. The prepared Pd/CB, Pd/MWCNTs and Pd/GAC moveable catalysts were aimed to address the common issues (easy loss of catalyst and poor long-term performance) of normal fixed catalysts. The results of various characterizations (e.g., TEM, XRD, and XPS) clearly show that the Pd nanopartides were successfully loaded onto the carbon-supports, especially CB and MWCNTs. And more importantly, the morphologies, Pd distribution, and chemical structure of these moveable catalysts were almost not changed after 3 h reaction. The moveable Pd/CB, Pd/MWCNTs, and Pd/GAC catalysts had good reactivity for 2,4-dichlorobenzoic acid (2,4-DCBA) dechlorination, and Pd/CB exhibited the best performance. The Pd/CB also shows the best adsorption capacity of 2,4-DCBA and dechlorination product (benzoic acid, BA), and the adsorption of BA was significantly inhibited in the presence of current due to the repulsion between the both negatively charged compounds and adsorbents. The removal of 2,4-DCBA and the generation rate of BA was improved with a pre-adsorption process, which was a promising strategy with higher dechlorination rate and shortened electrolysis time. Moreover, the loss of Pd catalyst was negligible during the 10 consecutive cycles experiment, and the improved longevity could be expected. These results suggested the good reactivity, stability, and reusability of moveable Pd/CB catalyst.
Efficient degradation of pyruvic acid in water by catalytic ozonation with PdO/CeO 2

Weiwei Li,Zhimin Qiang,Xiqing Zhang,Xiaolei Bao,Xu Zhao

DOI: https://doi.org/10.1016/j.molcata.2011.08.003

2011-01-01

Abstract:PdO/CeO2 prepared at various calcination temperatures and Pd loading percentages significantly enhanced the degradation of pyruvic acid (PA) in water by catalytic ozonation compared to ozonation alone. The surface property of PdO/CeO2 was characterized with X-ray diffraction, transmission electron microscope, X-ray photoelectron spectroscopy, BET surface area and zeta potential, and its relationship with the catalytic activity was examined and discussed in detail. Results indicate that PdO/CeO2 with 4.0% of Pd loading and calcined at 550°C showed the highest catalytic activity in PA degradation by ozone. Complete PA (5mgL−1) removal was quickly achieved in catalytic ozonation at 5min and pH 4.7, in which PdO and CeO2 exerted a synergic effect. Moreover, PdO/CeO2 exhibited a persistently high activity throughout the semi-continuous ozonation of PA. It was observed that the surface contents of Ce(III) and Pd(II) were closely related to the catalytic activity and the optimal surface molar ratio of Ce(III)/Pd(II) was around 1:1. The positively charged surface of PdO/CeO2 also played an important role in catalyzing PA degradation by ozone.
Ultra-efficient Ru and Nb Co-Modified CeO 2 Catalysts for Catalytic Oxidation of 1,2-Dichloroethane

Aiyong Wang,Min Ding,Yuang Cai,Li Wang,Yun Guo,Yanglong Guo,Wangcheng Zhan

DOI: https://doi.org/10.1021/acs.est.4c06776

IF: 11.4

2024-10-31

Environmental Science & Technology

Abstract:The oxidation of chlorinated volatile organic compounds on CeO(2) is hindered by its high susceptibility to chlorine poisoning, resulting in a reduced efficiency and stability. In this study, Ru- and Nb-co-modified CeO(2) catalysts were designed to achieve excellent activity, stability, and CO(2) selectivity in the catalytic oxidation of 1,2-dichloroethane (EDC). The formation of Nb-O-Ce bonds was observed to enhance the surface acidic sites, thereby improving HCl selectivity and reducing the...

environmental sciences,engineering, environmental
Study on catalytic wet air oxidation of acetic acid by ZrxCe1-xO2 catalyst

Wang Jian-Bing,Zhu Wan-Peng,Yang Shao-Xia,Zhou Yun-Rui

DOI: https://doi.org/10.3321/j.issn:0567-7351.2006.15.004

2006-01-01

Acta Chimica Sinica

Abstract:A series of ZrxCe1-xO2 catalysts were prepared by co-precipitation. They were characterized by BET, XRD and XPS. The catalytic wet air oxidation of acetic acid was carried out with these catalysts. It showed that the ZrxCe1-xO2 catalyst with 1 : 9 atomic ratio of zirconium to cerium demonstrated the best activity. At initial chemical oxygen demand (COD) of 5000 mg/L, reaction temperature of 230 degrees C and the pressure of 5 MPa, the removal efficiency of COD was 76% after 120 min. The good activity of this catalyst could be due to adding zirconium into CeO2 which could increase surface area and concentration of surface defect oxygen of the catalyst. This finally accelerated the formation of HO2 center dot radical and improved the activity of catalyst.
Enhanced Liquid Phase Catalytic Hydrodechlorination of 2,4-Dichlorophenol over Mesoporous Carbon Supported Pd Catalysts

Yun Shao,Zhaoyi Xu,Haiqin Wan,Yuqiu Wan,Huan Chen,Shourong Zheng,Dongqiang Zhu

DOI: https://doi.org/10.1016/j.catcom.2011.05.007

IF: 3.51

2011-01-01

Catalysis Communications

Abstract:Supported Pd catalysts on ordered mesoporous carbon (OMC) and activated carbon (AC) were prepared and their catalytic behavior for the liquid phase catalytic hydrodechlorination (HDC) of 2,4-dichlorophenol was investigated. In comparison with Pd/AC, Pd particles of Pd/OMC were effectively confined in the mesopores of OMC, resulting in high Pd dispersion and Pd2+ content. Accordingly, Pd/OMC exhibited higher catalytic activity than Pd/AC. Moreover, increasing catalyst reduction temperature lowered the catalytic activities and favored stepwise HDC of 2,4-dichlorophenol.
Dechlorination of chloroacetic acids by Pd/Fe nanoparticles: Effect of drying method on metallic activity and the parameter optimization

Xiangyu Wang,Ping Ning,Huiling Liu,Jun Ma

DOI: https://doi.org/10.1016/j.apcatb.2009.10.020

2010-01-01

Abstract:Two kinds of dry Pd/Fe nanoparticles (Pd/Fe-1 and Pd/Fe-2) were obtained by drying the laboratory synthesized wet Pd/Fe nanoparticles with direct oven drying method and solvent replacement oven drying method, respectively. A comparison was made between the two drying methods, concerning the effects of the washing reagents used during the drying process on the physicochemical properties and the activities of Pd/Fe nanoparticles for catalytic dechlorination of chloroacetic acids. Pd/Fe nanoparticles prepared by impregnation of iron nanoparticles with an aqueous solution of potassium hexachloropalladate were washed with different reagents (deionized water and organic solvents), followed by vacuum drying in an oven at 100°C. The prepared dry Pd/Fe-1 and Pd/Fe-2 nanoparticles were characterized in terms of specific surface area (BET-N2), morphology (SEM), surface elemental distribution (EDS), and particle size (TEM). The catalytic activities of Pd/Fe-1 and Pd/Fe-2 nanoparticles were evaluated via dechlorination reaction of chloroacetic acids including trichloroacetic acid (TCAA), dichloroacetic acid (DCAA), and monochloroacetic acid (MCAA). The removal efficiencies of chloroacetic acids by Pd/Fe-2 were about 58.5–22.7% greater than that achieved by Pd/Fe-1. The optimal Pd content, the amount of metal loading, and the initial pH value of reaction system for higher removal efficiency of chloroacetic acids were determined. The variation of pH value, dechlorination pathway and kinetics of chloroacetic acids were also investigated. The removal efficiencies of chloroacetic acids followed the order of TCAA>DCAA>MCAA with observed reaction rate constant (kobs) values of 1.113×10−1, 1.278×10−2, and 1.900×10−3min−1, respectively.
Enhanced Ethylene Selectivity Toward Hydrodechlorination of 1,2- Dichloroethane over Ag-Pd Bimetallic Catalysts

Jingya Sun,Yuxiang Han,Haiqin Wan,Shourong Zheng,Lin Dong

DOI: https://doi.org/10.11159/rtese17.134

2017-01-01

Abstract:Recently, catalytic hydrodechlorination (HDC) of chlorinated volatile organic compounds (CVOCs) receives increasing attention because it is an environmentally friendly technique to convert CVOCs air pollutants into useful chemicals, olefins [1].Then, improving the olefins selectivity of the catalysts for HDC of CVOCs has attracted considerable attention.We have studied the Pd-Ag bimetallic catalysts toward HDC of 1,2-dichloroethane to ethylene reaction.We used surface reduction method to prepare Pd-Ag/Al 2 O 3 catalyst, and evaluated their catalytic property toward HDC of 1,2-dichloroethane.As a result, Ag was deposited on the surface of Pd particles.With the increase of Ag content on the Pd surface led to the decrease of the amount of surface exposed Pd atoms.Thus, the Pd-Ag/Al 2 O 3 catalyst showed a higher ethylene selectivity (95%) than that prepared by conventional impregnated method (60%), shown in figure 1 [2].
Selective Hydrodechlorination of 1,2-Dichloroethane Catalyzed by Trace Pd Decorated Ag/Al2O3 Catalysts Prepared by Galvanic Replacement

Jingya Sun,Yuxiang Han,Heyun Fu,Haiqin Wan,Zhaoyi Xu,Shourong Zheng

DOI: https://doi.org/10.1016/j.apsusc.2017.09.168

IF: 6.7

2018-01-01

Applied Surface Science

Abstract:Ag catalysts decorated by trace Pd supported on gamma-Al2O3 with different structure and chemical properties were prepared using a combined impregnation and galvanic replacement method. For comparison, monometallic Ag/gamma-Al2O3 and Pd/gamma-Al2O3 catalysts were prepared using the impregnation method. Gas-phase catalytic hydrodechlorination of 1,2-dichloroethane to ethylene was investigated on those catalysts. The structures and chemical compositions of bimetallic Pd-Ag particles in the catalysts were controlled by adjusting Pd replacement amount. The as-prepared catalysts were characterized by X-ray diffraction, transmission electron microscopy, UV-vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, and in-situ FTIR spectroscopy of CO adsorption. The results demonstrated that contiguous Pd sites dominated in the monometallic Pd/gamma-Al2O3 catalyst, while Pd atoms were separately decorated on the surface of Ag particles in the bimetallic Pd/gamma-Al2O3 catalysts when Pd replacement amount was below 0.30 wt.%. At Pd replacement amount of 0.30 wt.%, Pd ensembles with contiguous Pd sites developed in the bimetallic catalyst. Thus, monometallic Pd/gamma-Al2O3 catalyst displayed negligible ethylene selectivity toward the catalytic hydrodechlorination of 1,2-dichloroethane, while bimetallic Pd/gamma-Al2O3 catalyst with a Pd replacement amount of 0.13 wt.% exhibited 94.6% of ethylene selectivity. Furthermore, selectivity to incompletely dechlorinated byproduct chloroethylene decreased with Pd replacement amount, due to the enhanced decoration effect of Pd on large Ag ensembles. Findings in this work provide a promising bimetallic catalyst prepared by galvanic replacement for the selective catalytic hydrodechlorination of 1,2-dichloroethane. (C) 2017 Elsevier B.V. All rights reserved.
Selective Hydrodechlorination of 1,2-Dichloroethane to Ethylene over Pd-Ag/Al2O3 Catalysts Prepared by Surface Reduction

Yuxiang Han,Guangfeng Gu,Jingya Sun,Wenjuan Wang,Haiqin Wan,Zhaoyi Xu,Shourong Zheng

DOI: https://doi.org/10.1016/j.apsusc.2015.06.164

IF: 6.7

2015-01-01

Applied Surface Science

Abstract:Alumina supported Pd-Ag and (Cu) bimetallic catalysts (denoted as sr-Pd-Ag/Al2O3 or sr-Pd-Cu/Al2O3) with varied Pd/Ag (or Cu) ratios were prepared using the surface reduction method, and the gas-phase catalytic hydrodechlorination of 1,2-dichloroethane over the catalysts were investigated. For comparison, Pd-Ag bimetallic catalysts were prepared by the conventional co-impregnation method (denoted as im-Pd-Ag/Al2O3). The catalysts were characterized by N-2 adsorption, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and CO chemisorption. Characterization results indicated that surface reduction led to selective deposition of metallic Ag on the surface of Pd particles, while Pd and Ag just disorderly mixed in the catalyst prepared by impregnation method. Therefore, sr-Pd-Ag/Al2O3 exhibited a higher ethylene selectivity than im-Pd-Ag/Al2O3 for hydrodechlorination of 1,2-dichloroethane at a similar Ag loading amount. Moreover, among sr-Pd-Ag/Al2O3, sr-Pd-Cu/Al2O3 and im-Pd-Ag/Al2O3 catalysts, the ethylene selectivity decreased over these catalysts following the order: sr-Pd-Ag/Al2O3 > sr-Pd-Cu/Al2O3 > im-Pd-Ag/Al2O3. The present results indicate that surface reduction can be used as a potential method to synthesize catalyst with enhanced ethylene selectivity in hydrodechlorination of 1,2-dichloroethane. (C) 2015 Elsevier B.V. All rights reserved.
Efficient Elimination of Chlorinated Organics on a Phosphoric Acid Modified CeO2 Catalyst: A Hydrolytic Destruction Route

Xiaoxia Dai,Xinwei Wang,Yunpeng Long,Samuel Pattisson,Yunhao Lu,David J. Morgan,Stuart H. Taylor,James H. Carter,Graham J. Hutchings,Zhongbiao Wu,Xiaole Weng

DOI: https://doi.org/10.1021/acs.est.9b05088

2019-01-01

Abstract:The development of efficient technologies to prevent the emission of hazardous chlorinated organics from industrial sources without forming harmful byproducts, such as dioxins, is a major challenge in environmental chemistry. Herein, we report a new hydrolytic destruction route for efficient chlorinated organics elimination and demonstrate that phosphoric acid-modified CeO2 (HP-CeO2) can decompose chlorobenzene (CB) without forming polychlorinated congeners under the industry-relevant reaction conditions. The active site and reaction pathway were investigated, and it was found that surface phosphate groups initially react with CB and water to form phenol and HCl, followed by deep oxidation. The high on-stream stability of the catalyst was due to the efficient generation of HCl, which removes Cl from the catalyst surface and ensures O2 activation and therefore deep oxidation of the hydrocarbons. Subsequent density functional theory calculations revealed a distinctly decreased formation energy of an oxygen vacancy at nearest (VO-1) and next-nearest (VO-2) surface sites to the bonded phosphate groups, which likely contributes to the high rate of oxidation observed over the catalyst. Significantly, no dioxins, which are frequently formed in the conventional oxidation route, were observed. This work not only reports an efficient route and corresponding phosphate active site for chlorinated organics elimination but also illustrates that the rational design of the reaction route can solve some of the most important challenges in environmental catalysis.

Ultra-fast Catalytic Hydrodechlorination of Chloroacetic Acids over Pd Catalyst Supported on CeO2 with Exposed (1 1 0) Plane

Reductive Removal of Chloroacetic Acids by Catalytic Hydrodechlorination over Pd/ZrO2 Catalysts

STUDY ON THE CATALYST OF Pd/C IN THE PURIFICATIONOF CHLOROACETIC ACID

Synergy of Metal–support Interaction and Positive Pd Species Promoting Efficient C–Cl Bond Activation on Pd-based Ce-MOF-derived Catalysts

Effective liquid phase hydrodechlorination of diclofenac catalysed by Pd/CeO2

Simultaneous Removal of Monochloroacetic Acid and Bromate by Liquid Phase Catalytic Hydrogenation over Pd/Ce1−xZrxO2

Elimination of 1,2-dichloroethane over (Ce, Cr)xO2/Nb2O5 catalysts: synergistic performance between oxidizing ability and acidity

Unveiling the efficient state of Pd catalyst for robust electrocatalytic hydrodechlorination

HCl-Tolerant HxPO4/RuOx-CeO2 Catalysts for Extremely Efficient Catalytic Elimination of Chlorinated VOCs.

The electrocatalytic dechlorination of chloroacetic acids at electrodeposited Pd/Fe-modified carbon paper electrode

Highly Selective Hydrodechlorination of 1,2-Dichloroethane to Ethylene over Ag-Pd/Zro(2) Catalysts with Trace Pd

Electrocatalytic Dechlorination of 2,4-Dichlorobenzoic Acid Using Different Carbon-Supported Palladium Moveable Catalysts: Adsorption and Dechlorination Activity

Efficient degradation of pyruvic acid in water by catalytic ozonation with PdO/CeO 2

Ultra-efficient Ru and Nb Co-Modified CeO 2 Catalysts for Catalytic Oxidation of 1,2-Dichloroethane

Study on catalytic wet air oxidation of acetic acid by ZrxCe1-xO2 catalyst

Enhanced Liquid Phase Catalytic Hydrodechlorination of 2,4-Dichlorophenol over Mesoporous Carbon Supported Pd Catalysts

Dechlorination of chloroacetic acids by Pd/Fe nanoparticles: Effect of drying method on metallic activity and the parameter optimization

Enhanced Ethylene Selectivity Toward Hydrodechlorination of 1,2- Dichloroethane over Ag-Pd Bimetallic Catalysts

Selective Hydrodechlorination of 1,2-Dichloroethane Catalyzed by Trace Pd Decorated Ag/Al2O3 Catalysts Prepared by Galvanic Replacement

Selective Hydrodechlorination of 1,2-Dichloroethane to Ethylene over Pd-Ag/Al2O3 Catalysts Prepared by Surface Reduction

Efficient Elimination of Chlorinated Organics on a Phosphoric Acid Modified CeO2 Catalyst: A Hydrolytic Destruction Route