Evolutionary Law of Pore Structure of Ion-Adsorbed Rare Earth Ore Leaching Process
Xiaoming Zhang,Zhongquan Gao,Yunzhang Rao,Liang Shi,Wei Xu
DOI: https://doi.org/10.3390/min13030322
IF: 2.5
2023-02-25
Minerals
Abstract:In the process of ion-adsorbed rare earth (RE) ore leaching and mining, the injected chemical agent and rare earth particles have a strong chemical reaction, resulting in changes in the structure of the rare earth, and thus affecting the macroscopic mechanical properties and permeability of soil. To investigate the evolution of the pore structure during the leaching process, indoor leaching simulation experiments were used to compare and analyze the changes of Zeta potential during the leaching process with different concentrations of leaching solution, the process of the gradual change of the strong and weak combined water layer was analyzed, and a nuclear magnetic resonance (NMR) instrument was used to obtain the structural parameters such as the porosity, T2 spectrum and pore radius to analyze the evolution law of microscopic pore structure. The experimental results show that the deionized (DI) water leaching process has less effect on the pore structure of the ore body, and the pore structure inside the ore body evolves gradually from small and medium pore size pores to large pore size pores, while the pore structure of the ore body changes more during the leaching process of the MgSO4 leaching solution. In the initial leaching stage, the number of minimal pores (0–0.24 μm) and small pores (0.24–0.65 μm) of the ore body decreases rapidly, and the number of large pores (1.6–10 μm) increases. In the effective leaching stage, the number of minimal pores (0–0.24 μm), small pores (0.24–0.65 μm) and medium pores (0.65–1.6 μm) increases, while the number of large pores (1.6–10 μm) and mega pores (greater than 10 μm) decreases. At the end of leaching stage, the pore size evolves from medium pores (0.65–1.6 μm) and small pore (0.24–0.65 μm) to large pores (1.6–10 μm). Both chemical replacement reaction and solution percolation can induce changes in the pore structure of the ore body, and the influence of the chemical replacement reaction is higher than that of percolation in the leaching process. The evolution of pore structure during ion exchange is caused by the difference of ionic strength in leaching solution. RE ore particles are adsorbed or released to the solid phase, and the migration of particles leads to changes in the interface properties of RE particles, which affects the pore structural changes.
geochemistry & geophysics,mineralogy,mining & mineral processing