Abstract:Abstract. The oxidation flow reactor (OFR) has been widely used to simulate secondary organic aerosol (SOA) formation in laboratory and field studies. The extent of hydroxyl radical (OH) oxidation (or OH exposure, OHexp), normally expressed as the product of OH concentration and residence time in the OFR, is important in assessing the oxidation chemistry in SOA formation. Several models have been developed to quantify the OHexp in OFRs, and empirical equations have been proposed to parameterize OHexp. Practically, the empirical equations and the associated parameters are derived under atmospheric relevant conditions (i.e., external OH reactivity) with limited variations of calibration conditions, such as residence time, water vapor mixing ratio, O3 concentration, etc. Whether the equations or parameters derived under limited sets of calibration conditions can accurately predict the OHexp under dynamically changing experimental conditions with large variations (i.e., extremely high external OH reactivity) in real applications remains uncertain. In this study, we conducted 62 sets of experiments (416 data points) under a wide range of experimental conditions to evaluate the scope of the application of the empirical equations to estimate OHexp. Sensitivity tests were also conducted to obtain a minimum number of data points that is necessary for generating the fitting parameters. We showed that, for the OFR185 mode (185-nm lamps with internal O3 generation), except for external OH reactivity, the parameters obtained within a narrow range of calibration conditions can be extended to estimate the OHexp when the experiments are in wider ranges of conditions. For example, for water vapor mixing ratios, the parameters obtained within a narrow range (0.49–0.99 %) can be extended to estimate the OHexp under the entire range of water vapor mixing ratios (0.49–2.76 %) studied. However, the parameters obtained when the external OH reactivity is below 23 s-1 could not be used to reproduce the OHexp under the entire range of external OH reactivity (4–204 s-1). For the OFR254 mode (254-nm lamps with external O3 generation), all parameters obtained within a narrow range of conditions can be used to estimate OHexp accurately when experimental conditions are extended, but too-low lamp voltages should be avoided. Regardless of OFR185 or OFR254 mode, at least 20–30 data points from SO2 or CO decay with varying conditions are required to fit a set of empirical parameters that can accurately estimate OHexp. Caution should be exercised to use fitted parameters from low external OH reactivity to high ones, for instance, those from direct emissions such as vehicular exhaust and biomass burning.

Supplementary Material to "measurement Report: Production and Loss of Atmospheric Formaldehyde at a Suburban Site of Shanghai in Summertime"

Measurement report: Production and loss of atmospheric formaldehyde at a suburban site of Shanghai in summertime

Total OH Reactivity Measurements in a Suburban Site of Shanghai

Measurement of Hydrogen Peroxide and Organic Hydroperoxide Concentrations During Autumn in Beijing, China

Oh Reactivity at A Rural Site (wangdu) in the North China Plain: Contributions from Oh Reactants and Experimental Oh Budget

Study on the Daytime OH Radical and Implication for Its Relationship with Fine Particles over Megacity of Shanghai, China

OH measurements in the coastal atmosphere of South China: possible missing OH sinks in aged air masses

Supplementary Material to "A Comprehensive Characterization of Empirical Parameterizations for OH Exposure in the Aerodyne Potential Aerosol Mass Oxidation Flow Reactor (PAM-OFR)"

Investigating The Sources Of Formaldehyde And Corresponding Photochemical Indications At A Suburb Site In Shanghai From Max-Doas Measurements

Observationally Constrained Modeling Of Atmospheric Oxidation Capacity And Photochemical Reactivity In Shanghai, China

Measurements of nitrous acid (HONO) in urban area of Shanghai, China

Increase of Ambient Formaldehyde in Beijing and Its Implication for Voc Reactivity

Atmospheric formaldehyde, glyoxal and their relations to ozone pollution under low- and high-NOx regimes in summertime Shanghai, China

Determination of Urban Formaldehyde Emission Ratios in the Shanghai Megacity

[Investigation of Atmospheric Formaldehyde and Glyoxal Based on Differential Optical Absorption Spectroscopy].

Interactive Comment on “ Observation and Modelling of OH and HO < Sub > 2 < / Sub > Concentrations in the Pearl River Delta 2006 : a Missing OH Source in a VOC Rich Atmosphere ”

Supplementary Material to "elevated Levels of OH Observed in Haze Events During Wintertime in Central Beijing"

Measurement report: Important contributions of oxygenated compounds to emissions and chemistry of volatile organic compounds in urban air

Urban Atmospheric Formaldehyde Concentrations Measured by a Differential Optical Absorption Spectroscopy Method.

Missing OH source in a suburban environment near Beijing: observed and modelled OH and HO<sub>2</sub> concentrations in summer 2006

How the OH reactivity affects the ozone production efficiency: case studies in Beijing and Heshan, China