Constructing Dynamic Self-Renewing Multi-Level Microstructural Antifouling Surface by Combining Quaternarily Modified Go with Self-Polishing Copolymer

Jianang Sha,Rongrong Chen,Jing Yu,Qi Liu,Jingyuan Liu,Jiahui Zhu,Peili Liu,Rumin Li,Jun Wang

DOI: https://doi.org/10.2139/ssrn.4104221

2022-01-01

Abstract:Marine biological fouling causes damage to ships and marine facilities. The most commonly used method against biofouling is to use self-polishing antifouling coatings. However, traditional coatings achieve antifouling by releasing toxic heavy metal antifouling agents, causing ecological problems. And the static antifouling performance of self-polishing antifouling coating is not good. To overcome the shortcoming, a novel antifouling strategy to build a self-renewing multi-level microstructure on the coating surface was developed by dispersing GO-based quaternary polymer brushes in a self-polishing fluoro/silyl acrylate copolymer. Quaternized modified GO exhibits excellent dispersibility in the silyl-based acrylate copolymer. A dynamic self-renewing surface is realized for the coating via a self-polishing effect that exposes the filler inside the coating at the surface. The polishing progressively exposes the filler at the coating surface, where the sharp edge of GO and quaternized “spear” structure destroys the cell wall of organisms, and a “water-shield” on amphoteric ion surface can inhibit adhesion of organisms. The antibacterial and anti-algae tests demonstrated the excellent antifouling effect of the coating at only 0.1% (mass) filler content, with anti-algae ratios against Nitzschia closterium ( N. closterium ), Phaeodactylum tricornutum ( P. tricornutum ) and Halamphora sp. of 83.7%, 52.4%, and 65.8%, respectively. The proposed preparation method is simple and potentially applicable to large-scale production.