Abstract:This article introduces an approach to harness digital twin (DT) technology in the realm of integrated sensing and communications (ISACs) in sixth-generation (6G) Internet of Everything (IoE) applications. We consider moving targets in a vehicular network and use DT to track and predict the motion of the vehicles. After predicting the location of the vehicle at the next time slot, the DT designs the assignment and beamforming for each vehicle. The real-time sensing information is then utilized to update and refine the DT, enabling further processing and decision making. In the DT, an extended Kalman filter (EKF) is used for the precise motion prediction. This model incorporates a dynamic Kalman gain, which is updated at each time slot based on the received echo signals. The state representation encompasses both the vehicle motion information and the error matrix, with the posterior Cram & eacute;r-Rao bound (PCRB) employed to assess sensing accuracy. We consider a network with two roadside units (RSUs), and the vehicles need to be allocated to one of them. To optimize the overall transmission rate while maintaining acceptable sensing accuracy, an optimization problem is formulated. Since, it is generally hard to solve the original problem, the Lagrange multipliers and fractional programming are employed to simplify this optimization problem. To solve the simplified problem, this article introduces both the greedy and heuristic algorithms by optimizing both the vehicle assignments and predictive beamforming. The optimized results are then transferred back to the real space for ISAC applications. Recognizing the computational complexity of the greedy and heuristic algorithms, a bidirectional long short-term memory (LSTM)-based recurrent neural network (RNN) is proposed for efficient beamforming design within the DT. Simulation results demonstrate the effectiveness of the DT-based ISAC network. Notably, the LSTM-based RNN method achieves similar transmission rates as the heuristic algorithm but with significantly reduced computational complexity.

BFP-Net:A Deep Learning Solution for Beamforming Prediction in Extended Vehicular Scenario Based ISAC System

Enhancing Mmwave Beam Prediction Through Deep Learning with Sub-6 GHz Channel Estimate

Predictive Beamforming for Integrated Sensing and Communication in Vehicular Networks: A Deep Learning Approach

Cooperative Localisation for Multi-Rsu Vehicular Networks Based on Predictive Beamforming

Deep CLSTM for Predictive Beamforming in Integrated Sensing and Communication-enabled Vehicular Networks

Bayesian Predictive Beamforming for Vehicular Networks: A Low-Overhead Joint Radar-Communication Approach

Transformer-Based Predictive Beamforming for Integrated Sensing and Communication in Vehicular Networks

Integrated Sensing and Communications for V2I Networks: Dynamic Predictive Beamforming for Extended Vehicle Targets

Radar Aided mmWave Vehicle-to-InfrastructureLink Configuration Using Deep Learning

Radar-assisted Predictive Beamforming for Vehicle-to-Infrastructure Links

Joint Vehicle Connection and Beamforming Optimziation in Digital Twin Assisted Integrated Sensing and Communication Vehicular Networks

Deep Learning Based Predictive Beamforming Design

Deep Learning-Based Cramér-Rao Bound Optimization for Integrated Sensing and Communication in Vehicular Networks

Radar Aided 6G Beam Prediction: Deep Learning Algorithms and Real-World Demonstration

Multimodal Deep Learning Empowered Millimeter-Wave Beam Prediction

IBTD: A novel ISAC beam tracking based on deep reinforcement learning for mmWave V2V networks

Vehicular Behavior-Aware Beamforming Design for Integrated Sensing and Communication Systems

Deep Learning-Based Link Configuration for Radar-Aided Multiuser Mmwave Vehicle-to-Infrastructure Communication

Radar-Aided Beam Selection in MIMO Communication Systems: A Federated Transfer Learning Approach

TIME-SEQUENCE CHANNEL INFERENCE FOR BEAM ALIGNMENT IN VEHICULAR NETWORKS

Deep Learning Assisted Beam Prediction Using Out-of-Band Information.