Abstract:Proton exchange membrane electrolytic cells (PEMECs) are considered cleaner energy-conversion devices with potential commercial applications in hydrogen production. However, the heat- and mass-transfer characteristics inside the cell remain unclear, and its performance should be optimized to achieve future commercial applications. A three-dimensional multi-physical field-coupling model is developed for the PEMEC. Subsequently, a multi-objective optimization design is used to optimize the structural and operational parameters of the cell based on a neural-network regression model. The results of the sensitivity and response-surface analyses indicate that the initial working temperature has the most significant impact on the reaction temperature, the current density is increased by up to 65.22% under the coupling effects of temperature and flow rate. The cell performance is also enhanced by the increased channel width and depth, although this is accompanied by limitations. Under the combined effects of increasing the working temperature and channel width or height, the current density can be increased by a maximum of 65.22% and 38.61%, respectively. The improvement in cell performance requires a trade-off between improved mass and heat transfer and larger pressure drop, and the optimal design achieves this trade-off. In optimal design, the current density is improved by up to 16.56%, the oxygen mass fraction of the catalytic layer is reduced by 40.90% compared with the original design, accompanied by a reasonable pressure drop and uniform temperature distribution. This study provides a novel perspective for the optimization of the PEMEC to promote its commercial application, offering a reference for further advanced optimization of cell performance and reducing trial-and-error costs. It is also expected to have practical applications in energy conservation and sustainable development.

Thermodynamic Modeling and Optimization of a Novel Hybrid System Consisting of High-Temperature PEMFC and Spray Flash Desalination

A hybrid system using direct contact membrane distillation for water production to harvest waste heat from the proton exchange membrane fuel cell

Multi-objective Optimization Design and Sensitivity Analysis of Proton Exchange Membrane Electrolytic Cell

Integration of high-temperature PEMFC with air gap membrane distillation for simultaneous electricity generation and seawater desalination: A theoretical investigation

Multi-parameter Analysis and Optimization Design of Proton Exchange Membrane Electrolytic Cell

An efficient high-temperature PEMFC/membrane distillation hybrid system for simultaneous production of electricity and freshwater

Thermodynamic Analysis and Optimization of a Novel Hybrid System Using Thermoacoustic Cycle to Harvest Waste Heat of High Temperature PEMFC

Thermodynamics and 3E Analyses of a High-Temperature Proton Exchange Membrane Fuel Cell-Based CCHP System with Cascade Utilization of Waste Heat

Heat-Integration of Solar-Heated Membrane Distillation and Fuel Cell for Desalination System Based on the Dynamic Optimization Approach

A single-phase, non-isothermal model for PEM fuel cells

Thermal analysis of high-temperature proton exchange membrane fuel cell integrated compression-assisted absorption heat pump system

Performance prediction and enhancement strategy of a new proton exchange membrane fuel cell-hydrophilic modified tubular still hybrid system

Performance evaluation and parametric optimization of a proton exchange membrane fuel cell/heat-driven heat pump hybrid system

A Hybrid System Using a Regenerative Electrochemical Cycle to Harvest Waste Heat from the Proton Exchange Membrane Fuel Cell

Comprehensive performance analysis and optimization for PEMFC-heat pump combined system considering dual heat source

Parametric Analysis of Efficient Desalination by Coupling the Fuel Cell Exhaust and Humidification-Dehumidification

Design and multi-objective optimization of low-temperature proton exchange membrane fuel cells with efficient water recovery and high electrochemical performance

Energy- and Exergy-Based Working Fluid Selection and Performance Analysis of a High-Temperature PEMFC-based Micro Combined Cooling Heating and Power System

Analysis of a hybrid system combining solar-assisted methanol reforming and fuel cell power generation

Configuration Design and Parametric Optimum Selection of a Self-Supporting PEMFC

Integration of Direct-Contact Membrane Distillation with Flat-Plate Solar Collector versus Proton-Exchange Membrane Fuel Cell: Dynamic Simulations and Comparative Analysis