Abstract:Biodegradable films of poly(propylene carbonate)/poly(vinyl alcohol)-thermoplastic polyurethane [PPC/(PVA-TPU)] ternary blends were successfully prepared by melting blending method. The mechanical properties of poly(propylene carbonate) blown film were greatly improved by blending PPC with PVA-TPU. In order to afford the melt processing of PVA, the PVA-TPU binary blend was firstly prepared using thermoplastic polyurethane as a polymeric plasticizer. The rheological behavior, mechanical properties and morphology of these blends were studied. Considering its melt viscosity and thermally processing temperature, the PVA-50%TPU, as a modifier, was blended with PPC to prepare PPC/(PVA-TPU) ternary blend. SEM observation revealed a basic one-phase morphological structure with very good interfacial adhesion between the extremely blurred PPC and PVA-TPU two components. Meanwhile, the miscibility of the ternary components was verified by only one glass-transition temperature obtained from DMA tests. The tensile strength and tear strength of PPC/(PVA-TPU) blown films were determined at different temperatures. The results demonstrate that the mechanical properties of PPC/(PVA-TPU) films were enhanced dramatically at low temperature when compared with neat PPC. At room temperature, PPC/30 %(PVA-50%TPU) blown film exhibited a tensile strength of 26 MPa, and an elongation at break of 484.0 %. Its tear strength in the take-up direction is 124.1 kN/m, and the one in machine direction is 141.9 kN/m. At a low temperature of 0 °C, PPC/30 %(PVA-50%TPU) exhibited a tensile strength of 40.7 MPa and tear strength of 107 kN/m, which are 153 % and 142 % of those of neat PPC respectively. The blending of PPC with the PVA plasticized with TPU provides a practical way to extend the application of the new biodegradable polymer of PPC in the area of blown films.

Sustainable and Biodegradable Poly(butylene Succinate‐co‐terephthalate)/poly(propylene Carbonate) Blown Films with Enhanced Compatibility, Mechanical, and Barrier Properties

Superior Gas Barrier Properties of Biodegradable PBST vs. PBAT Copolyesters: A Comparative Study

Effect of 1,4-bis(tert-butyl peroxy isopropyl) benzene on the rheological, mechanical, thermal and barrier properties of poly(butylene succinate-co-terephthalate)/poly(lactic acid) blends and blown films

Study on Thermal, Rheological, Mechanical, Morphological, and Barrier Properties of Poly(butylene Adipate-Co-terephthalate)/thermoplastic Starch/poly(propylene Carbonate) Biodegradable Blown Films

High-Barrier Poly(butylene Succinate-Co-terephthalate) Blend with Poly(lactic Acid) As Biodegradable Food Packaging Films

Rheological, Thermal and Mechanical Properties of Biodegradable Poly(Propylene Carbonate)/Polylactide/Poly(1,2-Propylene Glycol Adipate) Blown Films

Influence of Biodegradable Poly(butylene Carbonate) on Plasticized Polylactide Blown Films

Study on morphological, mechanical, thermal, barrier, rheological, and biodegradation properties of poly(butylene adipate‐co‐terephthalate)/thermoplastic starch/poly(propylene carbonate)‐g‐polyurethane biodegradable films

Structure of PBAT/PPC blends prepared by in-situ reactive compatibilization and properties of their blowing films

Biodegradable PBAT/PLA/CaCO 3 Blowing Films with Enhanced Mechanical and Barrier Properties: Investigation of Size and Content of CaCO 3 Particles

Mechanical Properties, Crystallization and Biodegradation Behavior of the Polylactide/Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)/Poly(but Ylene Adipate-Co-terephthalate) Blown Films

Biodegradable PPC/(PVA-TPU) ternary blend blown films with enhanced mechanical properties

High-Gas-Barrier and Biodegradable PPC-P/PBAT Composite Films Coated by Poly(vinyl Alcohol)/borax Complexes

Study on Preparation and Properties of Fully-Biodegradable PLA/PPA/PBS Blown Films

Rheological, Thermal and Mechanical Properties of Biodegradable Poly(lactic Acid)/poly(butylene Adipate-Co-terephthalate)/poly(propylene Carbonate) Polyurethane Trinary Blown Films

Mechanical Properties, Thermal Behavior, Miscibility and Light Stability of the Poly(butylene Adipate-Co-terephthalate)/poly(propylene Carbonate)/polylactide Mulch Films

Studies on Rheological, Thermal, and Mechanical Properties of Polylactide/Methyl Methacrylate-Butadiene-Styrene Copolymer/Poly(propylene Carbonate) Polyurethane Ternary Blends

In Situ Formation of Microfibrillar PBAT in PGA Films: An Effective Way to Robust Barrier and Mechanical Properties for Fully Biodegradable Packaging Films

Performance Of Biodegradable Spun-Bonded Non-Woven Fabric Slices Of Poly(Propylene Carbonate)/Compatibilizer/Polypropylene

Preparation and characterization of poly(propylene carbonate)/poly(hydroxy butyrate-co-hydroxyvalerate)(PHBv) composite films by tubular film blowing process

Study on Structure and Properties of PPC-MA/PETG Biodegradable Blends