Abstract:High voltage power switches are needed for medium-voltage (MV) grid applications such as Solid-state Transformers. The series-connection of low voltage devices is a cost-effective alternative approach to achieve higher blocking voltages. Furthermore, all reported high voltage SiC switches to date are unidirectional voltage blocking devices. Additional devices or power stages such as unfolding bridges are needed for MV AC applications. Combining high blocking voltage and bidirectional operation capability into one single module is, therefore, very attractive for future MV AC applications. This paper proposes a forced-air cooled 15 kV/50 A SiC AC switch based on the series-connection of 1700 V SiC MOSFETs. The AC switch consists of two identical parts connected source-to-source. Each part includes ten 1700 V SiC MOSFETs in series. Each set of ten SiC MOSFETs are driven by a common gate signal. A quantitative switching transient model is developed to expound on how multiple critical factors affect the voltage balancing during the switching transient. A preliminary voltage balancing performance is predicted using the proposed model. A dynamic balancing dV/dt snubber capacitor is then designed to achieve satisfactory voltage balance. A 10.5 kV/30 A double pulse test (DPT) is carried out to verify the feasibility of the designed AC switch and the validity of the proposed switching model. Necessary electrical characteristics of the fabricated 15 kV SiC AC switch are characterized for future applications. Auxiliary gate power supplies with 30 kV galvanic isolation capability are designed to support the intended MV applications. Based on the 15 kV SiC AC switch, a 7.2 kVac/100 kVA series resonant converter is developed and experimentally demonstrated to further verify the feasibility of the proposed device stacking technology.

A 900V/4m/80A Bidirectional SiC DC Solid State Contactor (SSC)

A 900V/4mΩ/80A Bidirectional SiC DC Solid State Contactor (SSC)

A Single Gate Driver Based Solid-State Circuit Breaker Using Series Connected SiC MOSFETs

ZVS range extension of 10A 15kV SiC MOSFET based 20kW Dual Active Half Bridge (DHB) DC-DC converter

Low Voltage DC Solid-State Circuit Breaker with Soft Turn-off and Self-Charging Operation

Design and Test of the Bidirectional Solid-State Switch for an 160kv/9ka Hybrid DC Circuit Breaker

A Novel High Current Solid State Power Controller

A Solid-State Circuit Breaker Based on Si-IGBT and SiC MOSFET Hybrid Switch with Self-delay Gate Driver Circuits

Design of 400 V Miniature DC Solid State Circuit Breaker with SiC MOSFET

A Novel Solid-state Circuit Breaker with Robust Breaking Capability and High Efficiency

Design of a Solid State Circuit Breaker Using a SiC MOSFET for LVDC Applications

High Current Medium Voltage Solid State Circuit Breaker Using Paralleled 15kv SiC ETO

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

Economic Implementation of 99.98% Efficiency in Natural-Cooling Modular MVDC SSCBs

15-Kv/50-a SiC AC Switch Based on Series Connection of 1.7-Kv MOSFETs

A Cost-Effective DC Circuit Breaker With Series-Connected Power Devices Using a Single Gate Driver

High Performance Solid-State Switches Using Series-Connected SiC-MOSFETs for High Voltage Applications

Pulsed Overcurrent Capability of Power Semiconductor Devices in Solid-State Circuit Breakers: SiC MOSFET Vs. Si IGBT

A High-Efficiency Protection Circuit Integrating Semi-Soft Switching and Voltage Limiting Functions for Solid-State Switch Applications

Improved medium voltage AC-DC rectifier based on 10kV SiC MOSFET for Solid State Transformer (SST) application

Ultra-Low On-State Voltage IGCT for Solid-State DC Circuit Breaker with Single-Switching Attribute