Abstract:Sodium-ion batteries (SIBs) have emerged as a promising alternative to lithium-ion batteries (LIBs) due to the abundance and low cost of sodium resources. Cathode material plays a crucial role in the performance of sodium ion batteries determining the capacity, cycling stability, and rate capability. Na3V2(PO4)3 (NVP) is a promising cathode material due to its stable three-dimensional NASICON structure, but its discharge capacity is low and its decay is serious with the increase of cycle period. We focused on modifying NVP cathode material by coating carbon and doping Nb5+ ions for synergistic electrochemical properties of carbon-coated NVP@C as a cathode material. X-ray diffraction analysis was performed to confirm the phase purity and crystal structure of the Nb5+ doped NVP material, which exhibited characteristic diffraction peaks that matched well with the NASICON structure. Nb5+-doped NVP@C@Nbx materials were prepared using the sol–gel method and characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Raman and Brunauer -Emmett-Teller (BET) analysis. First-principles calculations were performed based on density functional theory. VASP and PAW methods were chosen for these calculations. GGA in the PBE framework served as the exchange-correlation functional. The results showed the NVP unit cell consisted of six NVP structural motifs, each containing octahedral VO6 and tetrahedral PO4 groups to form a polyanionomer [V2(PO4)3] along with the c-axis direction by PO4 groups, which had Na1(6b) and Na2(18e) sites. And PDOS revealed that after Nb doping, the d orbitals of the Nb atoms also contributed electrons that were concentrated near the Fermi surface. Additionally, the decrease in the effective mass after Nb doping indicated that the electrons could move more freely through the material, implying an enhancement of the electron mobility. The electrochemical properties of the Nb5+ doped NVP@C@Nb cathode material were evaluated through cyclic voltammetry (CV), galvanostatic charge-discharge tests, electrochemical impedance spectroscopy (EIS), and X-ray photoelectric spectroscopy (XPS). The results showed that NVP@C@Nb0.15 achieved an initial discharge capacity as high as 114.27 mAhg−1, with a discharge capacity of 106.38 mAhg−1 maintained after 500 cycles at 0.5C, and the retention rate of the NVP@C@Nb0.15 composite reached an impressive 90.22%. NVP@C@Nb0.15 exhibited low resistance and high capacity, enabling it to create more vacancies and modulate crystal structure, ultimately enhancing the electrochemical properties of NVP. The outstanding performance can be attributed to the Nb5+-doped carbon layer, which not only improves electronic conductivity but also shortens the diffusion length of Na+ ions and electrons, as well as reduces volume changes in electrode materials. These preliminary results suggested that the as-obtained NVP@C@Nb0.15 composite was a promising novel cathode electrode material for efficient sodium energy storage.

Enhanced Na-Ion Storage of the NASICON Cathode Through Synergistic Bulk Lattice Modulation and Porous Architecture

Multifunctional-Element Doping of NASICON-Structured Cathode Enables High-Rate and Stable Sodium Storage

The recent advances of NASICON-Na3V2(PO4)3 cathode materials for sodium-ion batteries

Homogeneous Hybridization of NASICON-type Cathode for Enhanced Sodium-Ion Storage

Synergistically Boosting Sodium-Storage Performance of Na 3 V 2 (PO 4 ) 3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Synergistically Boosting Sodium-Storage Performance of Na3V2(PO4)3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Enhanced Na+/electron Transport of NASICON by Multiple Regulations for Sodium Ion Battery with High Rate Capability and Ultralong Lifespan

Achieving a Rapid Na+ Migration and Highly Reversible Phase Transition of NASICON for Sodium‐Ion Batteries with Suppressed Voltage Hysteresis and Ultralong Lifespan

A NASICON-type Na3.67Cu0.17Fe0.5V1.33(PO4)3 cathode with multi-electron reaction for high-energy sodium-ion battery

Construction of Three-Dimensional Electronic Interconnected Na3V2(PO4)3/C As Cathode for Sodium Ion Batteries

A Multicationic-Substituted Configurational Entropy-Enabled NASICON Cathode for High-Power Sodium-Ion Batteries

Preparation of Nb5+ Doped Na3V2(PO4)3 Cathode Material for Sodium Ion Batteries

Nitrogen-doped Carbon Coated Na3V2(PO4)3 with Superior Sodium Storage Capability

A Novel NASICON-typed Na3V1.96Cr0.03Mn0.01(PO4)2F3 Cathode for High-Performance Na-ion Batteries

NASICON-Type Na 3 V 1.5 Cr 0.4 Fe 0.1 (PO 4 ) 3 : High-Voltage and High-Rate Cathode Materials for Sodium-Ion Batteries

Partial Modification Strategies of NASICON-Type Na 3 V 2 (PO 4 ) 3 Materials for Cathodes of Sodium-Ion Batteries: Progress and Perspectives

Enhanced sodium storage property of sodium vanadium phosphate via simultaneous carbon coating and Nb<SUP>5+</SUP> doping

Partial Modification Strategies of NASICON-Type Na3V2(PO4)3 Materials for Cathodes of Sodium-Ion Batteries: Progress and Perspectives

Sodium-ion battery using a NASICON-type Na 3 V 2 (PO 4 ) 3 cathode: quantification of diffusive and capacitive Na + charge storage

Sr-Doped NASICON-Structured Cathode with Enhanced Conductivity for Ultrafast and High-Stability Sodium-Ion Storage

Boosting sodium-ion battery performance with binary metal-doped Na3V2(PO4)2F3 cathodes