Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Pose-dependent Natural Frequency Prediction for Milling Robot-a Variable Joint Stiffness Model

Analytical Kinetic Model for Accurate Square-slot Stator Natural Frequency Prediction

Stiffness-oriented Posture Optimization in Robotic Machining Applications

Natural Frequency Prediction Method for 6R Machining Industrial Robot

Interactive Coupling of Structural Dynamics and Milling Forces for High-Frequency Stability Prediction in Robotic Milling

A Model-Based Prediction Approach for Frequency Response Function of a Magnetic Adsorption Machining Robot

Modeling and Investigation of Spatial Operation Stiffness in Robotic Milling Process Considering Bidirectional Weak-Stiffness of Robot-Workpiece System

Model Parameter Identification of a Machining Robot Using Joint Frequency Response Functions

Research on the stability prediction for multi-posture robotic side milling based on FRF measurements

Prediction of the Posture-Dependent Tool Tip Dynamics in Robotic Milling Based on Multi-Task Gaussian Process Regressions

Rapid prediction of posture-dependent FRF of the tool tip in robotic milling

Variable Stiffness Identification and Configuration Optimization of Industrial Robots for Machining Tasks

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

Dynamic modeling and vibration prediction of an industrial robot in manufacturing

Vibration Prediction of the Robotic Arm Based on Elastic Joint Dynamics Modeling

Dynamic Modeling and Design Parameter Optimization of a 5-DoF Parallel Machining Robot

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Vibration Mode and Motion Trajectory Simulations of an Articulated Robot by a Dynamic Model Considering Joint Bearing Stiffness

Pose-Dependent Dynamic Modeling and Analysis of Bi-Rotary Milling Head

A two-stage dynamic model updating method for the FRF prediction of the robotized mobile machining equipment

Controlling harmful milling vibration for robotic milling system based on the optimization of milling posture and spindle speed