Abstract:1.INTRODUCTION In the physical researches, friction phenomenon that describes the force existing between relative moving surfaces paves a great challenge to the industrial production and the energy efficiency. The friction reduction or elimination in the moving mechanical system would be extremely favorable to the industrial manufacture and the sustainable development of the earth. Therefore, the phenomenon “superlubricity” [1] that refers to friction coefficient less than 0.01 has become an appealing focus in recent years. Superlubricity has been attained both between solid interfaces and across liquid medium. The carbon based materials and two-dimensional materials, such as Molybdenum disulfide [2] and diamond like carbon film (DLC) [3] have been investigated mostly to achieve solid superlubricity. Different from the mechanism of solid superlubricity, the liquid superlubricity was mainly focused on the reduction of shear strength of confined liquid between two friction surfaces. On micro-level, Raviv et al. obtained a super-low friction of alkali salt solutions between mica surfaces by surface force apparatus (SFA) [4]. The liquid superlubricity above was mainly attributed to the hydration effect, leading to the great reduction of energy dissipation in the hydration layer [5]. At macro-scale, there are also some materials found having liquid superlubricity properties. Kato found that superlubricity can be achieved when water was confined between ceramics, where the formation of silica gel provided an efficient boundary lubrication [6]. Recently phosphoric acid solution was found to achieve superlubricity with a friction coefficient of 0.004 [7]. Compared with the solid superlubricity, the water-based superlubricity is more promising for industrial application, because of its nonsensitive to environment conditions. It is interesting and feasible to explore the water-based liquid superlubricity based on other mechanisms. In the present work, we investigated the friction properties of acid solution and a super-low friction coefficient of 0.004 was achieved between polytetrafluoroethylene (PTFE) and sapphire without a running-in process. Here the friction properties were explored with different sliding velocity and pH value of the lubricant, and a further investigation on the mechanism through which superlubricity is obtained has been performed.

Photoinduced Superlubricity on TiO2 Surfaces

Investigation of the Running-in Process in Photoinduced Superlubricity

Friction Reduction Achieved by Ultraviolet Illumination on TiO2 Surface

Friction and Wear Studies of Octadecyltrichlorosilane SAM on Silicon

Dramatic Changes in Water Lubrication Aroused by Light

Contribution of a Tribo-Induced Silica Layer to Macroscale Superlubricity of Hydrated Ions

Evolution of tribo-induced interfacial nanostructures governing superlubricity in a-C:H and a-C:H:Si films

Tribochemistry and Superlubricity Induced by Hydrogen Ions

Illuminating Pathways to Dynamic Nanotribology: Light‐Mediated Active Control of Interfacial Friction with Nanosuspensions

Hydration Lubrication Modulated by Water Structure at TiO2-aqueous Interfaces

Superlubricity between sapphire and ptfe achieved by acid

Superlubricity Achieved With Mixtures Of Acids And Glycerol

In-situ Formation of Tribofilm with Ti3C2Tx MXene Nanoflakes Triggers Macroscale Superlubricity

Wettability Conversion from Superoleophobic to Superhydrophilic on Titania/Single-Walled Carbon Nanotube Composite Coatings

Improving frictional and insulation performance with silica-coated titanium dioxide additives in grease

Macroscopic Superlubricity Achieved by Polyacrylic Acid Modified Fe3o4 Nanoparticles As Additives

Investigations On The Mechanism Of Superlubricity Achieved With Phosphoric Acid Solution By Direct Observation

Reversible Control of Under-oil Superhydrophobicity to Superhydrophilicity on TiO2 Nanostructured Thin Film

Achievement of Liquid Superlubricity of Silicone Oil by Running-in with Hydrogen Ions

Insight into Superlubricity Via Synergistic Effects of Ammonium Tetrathiomolybdate and Hydrogenated Amorphous Carbon Films

Influence of surface structure/wettability on tribological properties of titanium