Abstract:Background: Clinical monitoring of planar pressure is vital in several pathological conditions, such as diabetes, where excess pressure might have serious repercussions on health of the patient, even to the extent of amputation. Objective: The main objective of this paper is to experimentally evaluate the combined application of the Fibre Bragg Grating (FBG) and the lead zirconate titanate (PZT) piezoceramic sensors for plantar pressure monitoring during walk at low and high speeds. Methods: For fabrication of the pressure sensors, the FBGs are embedded within layers of carbon composite material and stacked in an arc shape. From this embedding technique, average pressure sensitivity of 1.3 pm/kPa and resolution of nearly 0.8 kPa is obtained. These sensors are found to be suitable for measuring the static and the low-speed walk generated foot pressure. Simultaneously, PZT patches of size 10 × 10 × 0.3 mm were used as sensors, utilizing the d<formula>_{33}</formula> (thickness) coupling mode. A sensitivity of 7.06 mV/kPa and a pressure resolution of 0.14 kPa is obtained from these sensors, which are found to be suitable for foot pressure measurement during high speed walking and running. Both types of sensors are attached to the underside of the sole of commercially available shoes. In the experiments, a healthy male subject walks/runs over the treadmill wearing the fabricated shoes at various speeds and the peak pressure is measured using both the sensors. Commercially available low-cost hardware is used for interrogation of the two sensor types. Results: The test results clearly show the feasibility of the FBG and the PZT sensors for measurement of plantar pressure. The PZT sensors are more accurate for measurement of pressure during walking at high speeds. The FBG sensors, on the other hand, are found to be suitable for static and quasi-dynamic (slow walking) conditions. Typically, the measured pressure varied from 400 to 600 kPa below the forefoot and 100 to 1000 kPa below the heel as the walking speed varied from 1 kilometer per hour (kmph) to 7 kmph. Conclusions: When instrumented in combination, the two sensors can enable measurements ranging from static to high speed conditions Both the sensor types are rugged, small sized and can be easily embedded in commercial shoes and enable plantar pressure measurement in a cost-effective manner. This research is expected to have application in the treatment of patients suffering from diabetes and gonarthrosis.

Fiber Bragg Based Sensors for Foot Plantar Pressure Analysis

POFBG-Embedded Cork Insole for Plantar Pressure Monitoring

Insole optical fiber Bragg grating sensors network for dynamic vertical force monitoring

Design and analysis of a fiber Bragg grating‐based foot pressure assessment system

Design, Implementation, and Performance Evaluation of a Fiber Bragg Gratings(FBG) based Smart Insole to Measure Plantar Pressure and Temperature

Polymer Optical Fiber Plantar Pressure Sensors: Design and Validation

Integrated Fibrous Iontronic Pressure Sensors with High Sensitivity and Reliability for Human Plantar Pressure and Gait Analysis

Carbon Fiber‐Based Smart Plantar Pressure Mapping Insole System for Remote Gait Analysis and Motion Identification

Combined application of FBG and PZT sensors for plantar pressure monitoring at low and high speed walking

Fabric-Based Insoles With Self-Equipped Sensors for the Foot's Physiological Signal Monitoring

Breathable, Antibacterial, and Biocompatible Collagen Fiber Network Decorated with Zwitterionic Silver Nanoparticles for Plantar Pressure Monitoring

Textile-film sensors for a comfortable intelligent pressure-sensing insole

Development of Plantar Pressure Distribution Measurement Shoe Insole with Built-in Printed Curved Sensor Structure

Gait Pattern Analysis: Integration of a Highly Sensitive Flexible Pressure Sensor on a Wireless Instrumented Insole

Real-Time Foot Pressure Mapping Using a Smart Insole with Sinusoidally Embedded Fiber Bragg Gratings

The Design and Simulation of a 16-Sensors Plantar Pressure Insole Layout for Different Applications: From Sports to Clinics, a Pilot Study

Flexible sensor matrix film-based wearable plantar pressure force measurement and analysis system

Design of a Plantar Pressure Insole Measuring System Based on Modular Photoelectric Pressure Sensor Unit

Polymer Optical Fiber Sensors in Wearable Devices: Toward Novel Instrumentation Approaches for Gait Assistance Devices

Foot Plantar Pressure Measurement System Based on Flexible Force-Sensitive Sensor and Its Clinical Application

A 3D-Printed Capacitive Smart Insole for Plantar Pressure Monitoring