Abstract:In the past few decades, several robust designs dealing with disturbances in batch processes have been developed. The previous methods hold the viewpoint that all disturbances are harmful because they may drive the trajectory off the nominal optimal trajectory and lead to economic loss and safety issues. Are disturbances definitely detrimental? Actually, from the economic viewpoint, not all the disturbances are unfavorable to operating batch processes. To utilize disturbances fully for the improvement of the economic performance, disturbances are first divided into favorable and unfavorable types in this paper. An alternate feedback control (AFC) method is proposed to switch the feedback gains according to the types of disturbances, holding favorable disturbances and rejecting unfavorable disturbances. As a result, AFC will lead to an asymmetrical distribution of the trajectory. It is quite different from conventional feedback control (CFC), which rejects both favorable and unfavorable disturbances and leads to a symmetrical distribution. Second, because disturbances are the source of the variation and state errors are the combination of the previous state errors, control inputs, and disturbances, a disturbance-based feedback scheme is developed for AFC in this paper. Unlike traditional error-based feedback whose feedback gain acts on the state errors, the feedback gains of AFC act on the disturbances directly. Finally, a design combining robust economic optimization and AFC regulation is proposed for economic performance improvement and quick implementation of the regulation. The parameters of the online AFC are given by the robust economic optimization. This design can avoid the mismatch between the optimization layer and the regulating layer. Additionally, there will not be any computational burden for the novel design since the difficult and complex problem can be done offline and then AFC is implemented online using the gains generated offline. The optimality and the potential applications of the proposed integrated design are demonstrated through a typical dynamic batch reactor process.

Performance Analysis of Double EWMA Controller under Dynamic Models with Drift

Stability and Control Performance Analysis of Double EWMA Controller with Metrology Delay

Performance Analysis of Single EWMA Controller Subject to Metrology Delay under Dynamic Models

Performance analysis and comparison between two forms of double EWMA controllers in industrial process

An Analysis and Performance Assessment of Double Ewma Control Systems

Economic Performance Assessment of Multivariable Model Predictive Control Based on Linear Quadratic Gaussian Benchmark

Self-Evolving Offset-Free Model Predictive Control with Model-Plant Mismatch for Dynamic Working-Point Change Tasks in Industrial Processes

Frequency behavior analysis for predictive control with adaptive disturbance model

Disturbance-Based Alternate Feedback Control Scheme to Enhance Economic Performance of Batch Processes

Learning MPC for Process Dynamic Working Condition Change Tasks under Model Mismatch

Takagi–Sugeno Model Based Analysis of EWMA RtR Control of Batch Processes with Stochastic Metrology Delay and Mixed Products

Stability analysis of semiconductor manufacturing process with EWMA run-to-run controllers

Model Quality Evaluation in Semiconductor Manufacturing Process with Ewma Run-To-Run Control

Dynamics Modeling and Deviation Control of the Composites Winding System

A Study of MEWMA Controller for Drifted MIMO Non-Squared Process

Evaluation of Exponentially Weighted Moving Variance Control Chart Subject to Linear Drifts

Comments on “extensions and Performance/Robustness Tradeoffs of the EWMA Run-to-Run Controller by Using the Internal Model Control Structure”

The Optimal Drift-Compensatory and Fault Tolerant Approach for Mixed-Product Run-to-run Control

A MIMO R2R Control Using Data-Driven Gain Scheduling

Optimal Setup Adjustment and Control of a Process under ARMA Disturbances

State/Model-Free Variable-Gain Discrete Sliding Mode Control for an Ultraprecision Wafer Stage