Abstract:To achieve high speed, flexible planar parallel manipulators (PPM) are typically designed with lightweight linkages, but hence suffer from unwanted structural vibration, diminishing positioning accuracy. To achieve high positioning accuracy, this paper addresses the vibration suppression of a PPM with three flexible linkages actuated by linear ultrasonic motors (LUSM). Based on the extended Hamilton’s principle, a rigid–flexible dynamic model of a proposed PPM is developed using the substructure approach and the assumed mode method (AMM). The assumed mode shapes of the flexible linkages are verified through the experimental modal tests. Then, two control algorithms are designed for tracking control of the end effector and vibration attenuation of the flexible linkages. The first approach is a two-timescale control based on singular perturbation principles, implemented as a joint motion control without additional actuators. The second approach is a dual-stage control method. In this control approach, a variable structural control (VSC) method is applied to realize motion tracking of the moving platform, while the strain and strain rate feedback control (SSRF) is developed to suppress the undesired vibration of the flexible linkages, using multiple distributed collocated lead zirconate titanate (PZT) transducers. Stability analysis of the two algorithms is investigated based on Lyapunov approach. Simulation results of these two approaches show that the dual-stage control method provides better vibration attenuation, and hence, faster settling time of the PPM is achieved.

Modeling and Control for a Long-Stroke 4-PPR Compliant Parallel Mechanism

The Design and Kinetostatic Modeling of 3PPR Planar Compliant Parallel Mechanism Based on Compliance Matrix Method.

Kinetostatic Modeling Of Redundantly Actuated Planar Compliant Parallel Mechanism

On the Modeling and Composite Control of Flexible Parallel Mechanism

Nonlinear Kinetostatic Modeling and Analysis of a Large-Range 3-PPR Planar Compliant Parallel Mechanism

Systematic Design Method And Experimental Validation Of A 2-Dof Compliant Parallel Mechanism With Excellent Input And Output Decoupling Performances

Optimal design, modeling and control of a long stroke 3-PRR compliant parallel manipulator with variable thickness flexure pivots

Dynamic Modeling and Sliding Mode Control of a 2-DOF Spherical Parallel Mechanism with a Passive Branch

Synchronous Smooth Sliding Mode Control for Parallel Mechanism Based on Coupling Analysis

High-Performance Control Method for Six-Degreeof-Freedom Micro-Motion Stage Based on HighOrder Sliding Mode Control Theory

Dynamic Modeling and Controller Design of a Planar Parallel 3-RRR Compliant Micromanipulator

Stiffness modeling of compliant parallel mechanisms and applications in the performance analysis of a decoupled parallel compliant stage

Optimal Design and Tracking Control of a Superelastic Flexure Hinge Based 3-PRR Compliant Parallel Manipulator.

High Precision Six-Degree-of-Freedom Planar Motor Control Method Based on Sliding Mode Control Theory

Trajectory Tracking and Vibration Suppression of a 3-PRR Parallel Manipulator with Flexible Links

Design and Analysis of a Planar 3-DOF Large Range Compliant Mechanism with Leaf-Type Flexure.

Analysis And Control For A New Reconfigurable Parallel Mechanism

Integral Sliding Mode Based Precision Motion Control for PMLM.

High-Performance Control Method for Six-Degree-of-Freedom Micromotion Stage Based on High-Order Sliding Mode Control Theory

Design, Modeling and Analysis of Large-Stroke Compliant Constant Torque Mechanisms

Sliding Mode Control for a Novel 3-DOF Parallel Mechanism