Abstract:Rapid advancement of novel optical spectroscopy and imaging systems relies on the availability of well-characterised and reproducible protocols for phantoms as a standard for the validation of the technique. The tissue-mimicking phantoms are also used to investigate photon transport in biological samples before clinical trials that require well-characterized phantoms with known optical properties (reduced scattering (μ's) and absorption (μa) coefficients). However, at present, there is limited literature available providing well-characterized phantom recipes considering various biomarkers and tested over a wide range of optical properties covering most of the human organs and applicable to multimodal optical spectroscopy. In this study, gelatin-based phantoms were designed to simulate tissue optical properties where India ink and Intralipid were used as absorbing and scattering agents, respectively. Multiple biomarkers were simulated by varying the gelatin concentration to mimic the change in tissue hydration and hydroxyapatite concentration to mimic bone signature. The recipe along with biomarkers were optimized and characterised over a wide range of optical properties (μa from 0.1 to 0.5 cm-1; μ's from 5 to 15 cm-1) relevant to human tissue using a broadband time-domain diffuse optical spectrometer. The data collected showed a linear relationship between the concentration of ink/lipids and μa/μ's values with negligible coupling between μa and μ's values. While being stored in a refrigerator post-fabrication, the μa and μ's did not change significantly (<4% coefficient of variation, 'CV') over three weeks. The reproducibility in three different sets was validated experimentally and found to be strong with a variation of ≤6% CV in μa and ≤9% CV in μ's. From the 3 × 3 data of μa and μ's matrices, one can deduce the recipe for any target absorption or reduced scattering coefficient. The applicability of the phantoms was tested using diffuse reflectance and Raman spectrometers. A use case application was demonstrated for Raman spectroscopy where hydration and hydroxyapatite phantoms were designed to characterize the Raman instrument. The Raman instrument could detect the change in 1% of HA and 5% of hydration. This study presents a first-of-its-kind robust, well-characterized, multi-biomarker phantom recipe for calibration and benchmarking of multimodal spectroscopy devices assisting in their clinical translation.

Emulation of Brain Metabolic Activities Based on a Dynamically Controllable Optical Phantom

A Multiparameter Tissue-Mimicking Phantom for Multispectral Endoscopic Imaging

Fabrication of Tuneable Tissue-Mimicking Phantom for Optical Methods

A dynamic phantom brain model for near-infrared spectroscopy

A Digital Phantom for 3D MR Spectroscopy Data Simulation

Design of a Portable Phantom Device to Simulate Tissue Oxygenation and Blood Perfusion.

Fabrication of a Multilayer Tissue-Mimicking Phantom with Tunable Optical Properties to Simulate Vascular Oxygenation and Perfusion for Optical Imaging Technology.

Three-dimensional fuse deposition modeling of tissue-simulating phantom for biomedical optical imaging

A multi-modality medical imaging head and neck phantom: Part 2. Medical imaging

Developing Multifunctional Tissue Simulating Phantoms for Quantitative Biomedical Optical Imaging

Brain Phantom Research for Medical Diagnosis of the Human Head

Engineering vascularized skin-mimetic phantom for non-invasive Raman spectroscopy

Stable Tissue-Mimicking Phantoms for Longitudinal Multimodality Imaging Studies That Incorporate Optical, CT, and MRI Contrast

Fabrication and characterization of multi-biomarker optimized tissue-mimicking phantoms for multi-modal optical spectroscopy

Development and optical characterisation of agarose-based phantoms mimicking biological tissues for studies of light penetration in the brain

Research Progress of Brain like Tissue Phantom*

A digital instrument simulator to optimize the development of hyperspectral systems: application for intraoperative functional brain mapping

A low‐cost and multifunctional long‐life anthropomorphic head phantom for microwave brain imaging systems

A Solid Phantom Recipe for Biophotonics Applications: a Step Towards Anatomically Correct 3D Tissue Phantoms

Simulating Tissue Oxygenation by Encapsulating Hemoglobin in Polymer Microcapsules (conference Presentation)

3D printing of tissue-simulating phantoms as a traceable standard for biomedical optical measurement