Abstract:Because they have the potential for ultra low NOx emissions and high efficiency, Homogeneous Charge Compression Ignition (HCCI) engines have the potential to develop a significant niche. However, a narrow operating range, (bracketed by severe knock and misfire problems), presents a formidable obstacle to developing usable HCCI combustion systems. HCCI combustion is influenced by a complex array of operating variables including fuel octane quality, intake preheating temperature, compression ratio, equivalence ratio, exhaust gas recirculation and engine component temperature. These variables affect the two critical combustion parameters: ignition timing and combustion duration. If these two parameters can be controlled by appropriate settings of the operating variables, a good HCCI combustion scheme could be achieved. Therefore, the theoretical prediction of these two combustion parameters as a function of the key operating variables is necessary for development of HCCI combustion. This paper describes a stand-alone, single-zone and multi-zone combustion model which have been developed for the specific purpose of investigating HCCI combustion control. In the multi-zone model, temperature and composition in each zone were adjusted in order to study the effect of in-homogeneity which is critical to understanding ignition timing and combustion duration in real HCCI engines. The models simulated HCCI combustion using two fuels: hydrogen, (11 species, 23 reactions- from CHEMKIN library), and natural gas, (53 species, 325 reactions- from GRI mech). The capabilities of the two models to predict ignition timing, combustion duration and peak pressure were verified against experimental and simulation results of Fiveland et al [2, 11]. The models were then used to study the effect of different in-homogeneity levels of equivalence ratio, intake temperature and residual fraction. The single zone model could only predict ignition timing while the multi-zone model shows the capability to mimic realistic HCCI combustion phenomena. The study showed that some degree of in-homogeneity is critical to predicting performance of the homogeneous charge compression ignition engine. Further, stratification of equivalence ratio was relatively ineffective at changing combustion while stratification of mixture temperature was very effective. Stratification of the residual fraction proved to be the most promising method of controlling combustion parameters and the mechanism was primarily thermal.

HCCI WITH SELECTED STANDARD AND ALTERNATIVE FUELS: CHALLENGES AND SOLUTIONS

HCCI with Standard and Alternative Fuels at Moderate Compression Ratios

Active Fuel Design-A Way to Manage the Right Fuel for Hcci Engines

Experimental Research on HCCI Using Gasoline and Diesel Blended Fuels

HCCI Engine Modeling for Real-Time Implementation and Control Development

Detailed Chemical Kinetic Simulation of Natural Gas HCCI Combustion: Gas Composition Effects and Investigation of Control Strategies

Real-time Control Oriented HCCI Engine Cycle-to-cycle Dynamic Modelling

HCCI Technology: Operating Principles, Advantages, Challenges, and Future Prospects

An Experimental Study of Dieseline Combustion in a Direct Injection Engine

Operating Characteristics of a Homogeneous Charge Compression Ignition Engine with Cam Profile Switching - Simulation Study

A Stand-Alone Multi-Zone Model for Combustion in HCCI Engines

An Experiment Study of Homogeneous Charge Compression Ignition Combustion and Emission in A Gasoline Engine

Computational study of hydrogen engine combustion strategies: Dual-Fuel compression ignition with Port- and Direct-Injection, Pre-Chamber Combustion, and Spark-Ignition

Research on Expansion of Operating Windows of Controlled Homogeneous Auto-Ignition Engines

A comprehensive engine to drive-cycle modelling framework for the fuel economy assessment of advanced engine and combustion technologies

Control of HCCI engine fueled with gasoline with electro-hydraulic variable valve system

Multi-objective optimization of a compression ignition engine using on-board methanol reforming

HCCI Engine: Advancements in Combustion Control and Potential Innovation in Power Configuration for Vehicles

Control system development for gasoline HCCI engine which based on heat management

An Autoignition Combustion Model for Homogeneous Charge Compression Ignition Engine Cycle Simulations

Potential of hydrogen addition to natural gas or ammonia as a solution towards low- or zero-carbon fuel for the supply of a small turbocharged SI engine