Overview of Ergonomics in Latin America

Marcelo M. Soares

DOI: https://doi.org/10.1201/9781420079128.ch23

2009-01-01

Abstract:23.1 Introduction 34923.2 Ergonomics in Argentina 34923.3 Ergonomics in Brazil 35023.4 Ergonomics in Chile 35223.5 Ergonomics in Colombia 35323.6 Ergonomics in Ecuador 35323.7 Ergonomics in Mexico 35423.8 Ergonomics in Peru 35423.9 Ergonomics in Venezuela 35523.10 Conclusion 355Acknowledgments .......356References 356

What problem does this paper attempt to address?

Ergonomics in Latin America: background, trends and challenges.

Marcelo M Soares

DOI: https://doi.org/10.1016/j.apergo.2006.04.014

IF: 3.94

2006-01-01

Applied Ergonomics

Abstract:This paper offers an introduction to ergonomics in Latin America through a brief overview of ergonomics practice in Argentina, Brazil, Chile, Colombia, Mexico ,and Peru. It provides a short description of the history of ergonomics in each country, ergonomics teaching, its organisation through the ergonomics associations, and some highlights of the areas of interest, and examples of ergonomics practice.
[Trends in Brazilian Research in Ergology]

Luiz Phillipe Mota Pessanha,Isabel Cristina Dos Santos,Mayara Vieira Henriques,Raquel Cançado,Rayana Ferreira Vinagre,Alexandre de Carvalho Castro

DOI: https://doi.org/10.1590/1413-81232023282.09412022

Abstract:This article aims to analyze trends in research on Ergology in Brazil published from 1997 to 2019, considering the nature of the publication and the potential impact of the databases in which they are published. Studies related to occupational health indicate the growing influence of Ergology in the understanding of the world of work, a fact evidenced in previous bibliometric research, of lesser breadth and scope of the databases investigated, which is why we intend to cover gaps and broaden the analysis with more up-to-date data. Using descriptors peculiar to Ergology, surveys were conducted in the Web of Science, Scopus and SciELO databases, in journals not indexed to the databases cited, and in academic productions available in the Capes catalog. The projection of Brazil in studies on Ergology was revealed, with the Southeast being the region with the highest concentration of authors and volume of publications. However, the interrelationship between researchers tends to be limited to the institutions in which they work. There is a prevalence of theses and dissertations to the detriment of articles in productions related to Ergology. Publications point to interdisciplinarity - with a predominance of Occupational Health, Education, and Psychology - and tend to feature in vehicles of lesser scientific relevance.
Ergonomic Analysis of Safety Signs: a Focus of Informational and Cultural Ergonomics

Janaina Cavalcanti,Marcelo Soares

DOI: https://doi.org/10.3233/wor-2012-0619-3427

2012-01-01

Work

Abstract:This paper presents the results of a research carried out in the states of Pernambuco and Rio Grande do Sul, Brazil about differences and similarities in the graphic representation of safety signs at factories of food, steel, shoes and construction/building industries, together with their workers' opinions on the security signs. The overall results show differences in the sign structure across the states, confirming the influence of cultural differences on the design of safety signs, which must be taken into account during the design process.
An applied ergonomics study on IT user interaction in a large hydroelectric company in the northeast of Brazil

Marcelo Márcio Soares,Fabio Campos,Walter Correia,André Neves,Joao Corte,Saul Mendonca

DOI: https://doi.org/10.1007/978-3-642-39253-5_13

2013-01-01

Abstract:The aim of this study was to develop an ergonomic methodology to verify the compliance and usability of software, in line with, ISO 9241, which may assist software developers, maintainers and assessors in a power distribution utility in northeastern Brazil to improve the quality of Human-Computer Interactions. It also set out to develop and implement a software tool that might incorporate the methodology developed, thus enabling IT professionals to conduct a compliance review with a view to increasing productivity and reducing failures of the services managed or implemented by using this software which had undergone ergonomic verification.
Participatory ergonomics intervention for improving human and production outcomes of a Brazilian furniture company

Lia Buarque de Macedo Guimarães,Michel Jose Anzanello,Jose Luis Duarte Ribeiro,Tarcisio Abreu Saurin

DOI: https://doi.org/10.1016/j.ergon.2015.02.002

IF: 2.884

2015-09-01

International Journal of Industrial Ergonomics

Abstract:This article presents a participatory intervention in a furniture manufacturing company in Southern Brazil aiming to improve both ergonomic and production outcomes. The existing Tayloristic model was replaced by a cellular teamwork model. Work enlargement and enrichment, and the improvements in workstation design and process flow increased worker satisfaction and reduced postural risk, fatigue, body pain and production waste. Workload was reduced by 42% and productivity increased by 46% (25% being attributable to unnecessary load handling, waiting and transportation, and 21% attributable directly to manufacturing times). Workers' participation in the stages of problems identification, design and evaluation of solutions played a major role in these outcomes.Relevance to industryThis study indicates that it is possible to balance ergonomics and production demands, and that it is necessary to make it clear to management. The integration of macroergonomics and production management principles increases both worker well-being and productivity levels, thus leading to a more sustainable system.

engineering, industrial,ergonomics
Social construction as a means of ergonomic intervention

Raoni Rocha,José Marçal Jackson Filho,Alain Garrigou,Adelaide Nascimento

DOI: https://doi.org/10.1590/1806-9649-2022v29e5022

2022-01-01

Gestão & Produção

Abstract:Abstract Although Ergonomic Workplace Analysis (EWA) practice is common in Brazil, some critics have asserted that it is not sufficient to bring about an effective change of the workplace. Although this criticism may be partly admissible in regard to Brazilian ergonomics, it cannot be considered to apply to France, where Activity-Centered Ergonomics was born. At the same time, it is important to not confuse EWA with the broader field of Activity-Centered Ergonomics. Against this background, this article seeks to analyze the elements that characterize contemporary ergonomics practices in Brazil so as to compare them to the modes of intervention developed in France. We also seek to investigate models, concepts and methods so as to expand the possibilities of ergonomic interventions in Brazil. To do so, we will start from a theoretical examination of the development of EWA in Brazil from its origins in France, presenting an intervention conducted at a French electricity company. Next, we will discuss the losses suffered by EWA during the transfer of EWA methodology from France to Brazil, as well as the need to cultivate social construction at all stages of these interventions. We conclude by showing the importance of developing this debate in the field of ergonomics and the need to continue it.
Evaluation Of A Work Space Based On An Ergonomic Design Methodology Of The Built Environment

Vilma Villarouco,Marcelo Soares,Ana Paula Lima Costa,Luiz Andreto

DOI: https://doi.org/10.1080/1464536X.2011.559290

2012-01-01

Theoretical Issues in Ergonomics Science

Abstract:The theme of this study is the evaluation of a work environment based on the Methodology of Ergonomic Assessment of the Built Environment - MEAC (Villarouco, V., 2007. Is the environment adequate? Proceedings of the 1st Brazilian meeting of the built environment and 2nd Brazilian seminar of accessibility (In Portuguese). Recife, Brazil, Villarouco, V., 2008. Designing a methodology to evaluate the ergonomic environment. Proceedings of the Brazilian Congress of ergonomics (In Portuguese). Porto Seguro: ABERGO, Villarouco, V., 2009. An ergonomic look at the work environment. Proceedings of IEA 2009: 17th World Congress on ergonomics. Beijing, China: IEA - International Ergonomics Association). An attempt was made to identify factors of the built space that most significantly influence how work activities are undertaken, based on the evaluation of the space of a government management audit and accounting department. The evaluation was made over two steps: before and after alterations made to the space, which allowed a comparison to be made between the adaptability of the spaces and the activities. The methodological procedure applied in this study allowed an analysis that set out to identify the interactions between the variables of the built environment and how the activities were undertaken. This method of applying ergonomics to the design of built environments showed that some characteristics of the spaces influence the costs of production, human costs and the efficiency of the process.
Design and Ergonomics of Package Inserts of Drugs in Brazil: A Reality in Construction

Charles Ricardo Leite da Silva,Marcelo Marcio Soares

DOI: https://doi.org/10.3233/wor-2012-0432-2068

2012-01-01

Work

Abstract:This research deals with the design of leaflets of medicines, evidencing the problems resulting from the lack of Brazilian normalization to promote the use of the graphical representation of instructional texts warnings. It approaches studies related to the effectiveness and efficiency of information systems, highlighting the semiotics and the cultural and informational ergonomics. The analysis of the context uses as method, an analytical study on selected warnings of thirty leaflets of medicines, followed by interviews lead with the public managers involved with the regulation of the pharmaceutical companies, and two experiments with users performed in city of Recife, in State of Pernambuco: one aiming at to identify how they interact with the leaflets of medicines, and the second one testing their understanding concerning standardized illustrations in the United States and the South Africa. The results show the need for improvements in presentation and graphic representation of leaflets of medicines, powering them to the role of communication, to ensure the consumption of medicine safely by its users. The conclusion congregates parameters and recommendations for the graphic representation of warnings in leaflets of medicines in Brazil.
A case study of the implementation of an ergonomics improvement committee in a Brazilian hospital--Challenges and benefits

Ivan Bolis,Laerte I Sznelwar

DOI: https://doi.org/10.1016/j.apergo.2015.09.012

Abstract:This article discusses the creation of an improvement committee (IC) to implement policies aimed at improving working conditions in a public health institution in the city of São Paulo. Suggestions were proposed for future implementations of this organizational mechanism, pursuant to the presentation of the process of its formation and the main results achieved. The findings led to the conclusion that good outcomes require autonomy and support from management, and the adoption of effective measures to improve and legitimize the improvement committee's existence. Another important issue is facilitating worker involvement and creating a locus for dialog among people with different visions within the organization. Thus, two approaches converge: a top-down approach in which policies are defined and improvement actions are actually implemented based on a general outlook of the production and work system, and a bottom-up approach specific to employees who are also engaged in improvement policies and in putting them into practice. It is also possible to point out problems and opportunities arising from actual work situations to the higher levels of management. This kind of approach fits with macroergonomics, because it integrates strategy, organization and work issues. It is possible to discuss the benefits of this approach for companies and provide conditions for workers to engage effectively in these processes. In conclusion, these proposals can be considered from an emancipatory perspective, given that different actors should be able to codetermine working conditions and work content, thus directly influencing their individual and collective experiences. The support and commitment of upper management are essential elements of success in maximizing the effectiveness of this organizational approach.
Work at Height: Neglect or Improvisation in Civil Construction in Brazil and Uruguay?

A. S. Tavares,L. W. N. de Albuquerque,J. C. da Silva,C. B. Souza Junior,C. Galvez,M. Soares

DOI: https://doi.org/10.1016/j.promfg.2015.07.763

2015-01-01

Procedia Manufacturing

Abstract:Work at heights in the construction industry is responsible for a large number of occupational accidents. In Brazil, despite the relevant security-related legislation, it is possible to find situations of neglect and improvisation in various construction sites. The aim is to promote the debate about labor safety at construction sites. This article discusses the similarities between the labor safety laws of Brazil and Uruguay. After visits to construction sites in the cities of Recife (Brazil) and Montevideo (Uruguay) it was possible to observe both ergonomic and labor safety problems. After analyzing the perception of risk, improvement suggestions were generated.
Proposal of a Guide to Select Methods of Ergonomic Assessment in the Manufacturing Industry in México

López Millán Francisco Octavio,De la Vega Bustillos Enrique Javier,Arellano Tanori Oscar Vidal,Meza Partida Gerardo

DOI: https://doi.org/10.1007/978-3-319-96068-5_33

2018-08-08

Abstract:AbstractThis paper presents the particular situation on the manufacturing industry in Mexico, a sector of the economy that provides important figures for the economy and that generates an important number of jobs, and the relevance of ergonomics in the health care of workers, in particular the Work Muscle Skeletal Disorders (WMSD). In recent years there has been an increase in the number these cases. In addition, the new legal regulations that require companies to identify and evaluate Ergonomics Risk Factors (ERF) have taken effect and it is needed take actions to minimize the risk of exposure to a WMSD. The paper presents a review of the ERF and the WMSD described in the literature as well as the proposal of a methodological guide to select the Ergonomic Assessment Methods (EAM) with greater application for the manufacturing industry, distinguishing two main activities; repetitive work and manual handling of loads. For each of these, the EAMs with the simplest application in two levels are suggested; the recommended EAM and at a second level the alternative EAMs to complement the evaluation. The guide is presented graphically and a brief description of each method and its scientific reference is provided.
Ergonomic And Control Rooms: A Case Study Of A Hydroelectric Enterprise

Christianne S. Falcao E Vasconcelos,Marcelo Marcio Soares

2010-01-01

Abstract:This paper presents the ergonomic participation in a project to modernize the control room in a hydroelectric company from Brazil. In this design, the ergonomics interferes from the viability studies, in the early stages, until the workplace definition, furniture setting, computerized equipment development, setting screens, the staff recruitment and the training and organization of the work. The control room under study has been undergoing several steps of modernization owing to the shifts of the information media, when the synoptic panels/screens where changed. The limits of the ergonomic proposal, its contribution to the analysis of the work situation, the use of an ergonomic methodology as well as the results will be discussed.
Indonesia ergonomics roadmap: where we are going?

Sritomo Wignjosoebroto

Abstract:There are so many definitions for ergonomics terms such as human factors, human factors engineering, human engineering, human factors psychology, engineering psychology, applied ergonomics, occupational ergonomics, industrial ergonomics and industrial engineering. The most inclusive terms are ergonomics and human factors. Both represent the study of work and the interaction between people and their work environmental systems. The main objective is especially fitting with the need to design, develop, implement and evaluate human-machine and environment systems that are productive, comfortable, safe and satisfying to use. The work of the ergonomists in Indonesia--most of them are academicians--have one thing in common, i.e. with the appropriate type of ergonomic approaches to interventions; there would be improvements in productivity, quality of working conditions, occupational safety and health (OSH), costs reduction, better environment, and increase in profits. So many researches, training, seminars and socialization about ergonomics and OSH have been done concerning micro-to-macro themes; but it seems that we are practically still running at the same place up to now. In facts, workers are still working using their traditional or obsolete methods in poor working conditions. Accidents are still happening inside and outside industry with the main root-cause being human "unsafe behavior" and errors. Industrial products cannot compete in the global market, and so many manufacturing industries collapsed or relocated to foreign countries. This paper discusses such a roadmap and review what we ergonomists in Indonesia have done and where we are going to? This review will be treated in the field of ergonomics and OSH to take care the future Indonesia challenges. Some of the challenges faced are care for the workers, care for the people, care for the quality and productivity of work, care for the new advanced technologies, care for the environment, and last but not least care for the nation.
Ergonomics, development and sustainable work: a look for worker's health

Renato José Bonfatti,Luiz Carlos Fadel de Vasconcellos,Aldo Pacheco Ferreira

DOI: https://doi.org/10.5327/Z1679443520170006

2017-09-01

Abstract:Background: The Brundlandt Report (Our Common Future), from 1987, provided just a generic notion of sustainable development, leaving to the political, academic and social milieus the formulation of the technical foundations of sustainability. Within this context, category workers' health was neglected. Objective: The present paper discusses the central relevance of work and its relationship to health for the development of sustainability as anchored in the respect for the life and health of workers. Methods: Based on the qualitative scientific paradigm and the dialectical method, the theoretical and empirical research conducted in the presented study adopted an epistemological perspective grounded on three basic principles: constructive nature of interpretative knowledge, interactive nature of the research process and significance of singularity as a level of knowledge production through a dialogical process. Results: Based on the analysis performed, subject workers' health in its relation to sustainable development was subjected to an epistemological discussion. Conclusion: To fully substantiate this notion, the idea of sustainable development implies a thorough involvement of ergonomics and other fields of knowledge related to work.
Ergonomic Strategies for Improving Working Conditions in Some Developing Countries in Asia.

T Kawakami,J M Batino,T T Khai,Tsuyoshi KAWAKAMI,Jose Maria BATINO,Ton That KHAI

DOI: https://doi.org/10.2486/indhealth.37.187

1999-01-01

Industrial Health

Abstract:Ergonomic action is growing in Asia in response to increasing local needs. Recent studies in some developing countries in Asia commonly developed and applied widely-applicable measures for assessing local needs in field conditions including small enterprises and agriculture. For this purpose, carefully examining the actual workplace conditions of the local people was essential. Consequently, a number of field studies could contributed to improving the working conditions of the local people in materials handling, workstation design, work organization and work environment by using available local resources. Building on local capacity and practice, action-oriented ergonomics training has also been developing and spreading into many workplaces. Various non-expert human resources including local government units, trade unions, industrial associations and the agricultural sectors have been mobilized to act as participatory trainers in the action-oriented ergonomic training programmes. Training tools such as action checklists, good local examples and group work dynamics have been developed and applied to such training activities. Learning from local achievements and focusing on locally available resources, ergonomists have facilitated these local action processes by developing action-oriented training tools and training local trainers. It was confirmed that a number of ergonomic improvements could be formulated by the self-help initiative of the local people when participatory action tools and training were provided. Developing flexible and dynamic ergonomic research and training methods to meet the diversifying needs of the local people will continuously be important. Ergonomists' efforts to cover the wider population and workplaces need to be strengthened and accelerated.

public, environmental & occupational health,toxicology,environmental sciences
Pediatric anesthesiology in Brazil, Chile, and Mexico

Vinícius Caldeira Quintão,Mario Concha,Lina Andrea Sarmiento Argüello,Silvana Cavallieri,Luis I Cortinez,Gabriel Soares de Sousa,Marcella Marino Malavazzi Clemente,Ricardo Vieira Carlos,Juan Manuel Rodríguez,Karla Gutiérrez,Denis H Jablonka,Annery G García-Marcinkiewicz

DOI: https://doi.org/10.1111/pan.14886

Abstract:Background: Latin America comprises an extensive and diverse territory composed of 33 countries in the Caribbean, Central, and South America where Romance languages-languages derived from Latin are predominantly spoken. Economic disparities exist, with inequitable access to pediatric surgical care. The Latin American Surgical Outcomes Study in Pediatrics (LASOS-Peds), a multi-national collaboration, will determine safety of pediatric anesthesia and perioperative care. Objective: Below, we provide a descriptive initiative to share how pediatric anesthesia in Brazil, Chile, and Mexico operate. Theses descriptions do not represent all of Latin America. Descriptions and conclusions: Brazil an upper middle-income country, population 203 million, has a public system insufficiently resourced and a private system, resulting in inequitable safety and accessibility. Surgical complications constitute the third leading cause of mortality. Anesthesiology residency is 3 years, with required rotations in pediatric anesthesia; five hospitals offer pediatric anesthesia fellowships. Anesthesiology is a physician-only practice. A Pediatric Anesthesia Committee within the Brazilian Society of Anesthesiology offers education through seasonal courses and workshops including pediatric advanced life support. Chile is a high-income country, population 19.5 million, the majority cared for in the public system, the remainder in university, private, or military systems. Government efforts have gradually corrected the long-standing anesthesiology shortage: twenty 3-year residency programs prepare graduates for routine pediatric cases. The Chilean Society of Anesthesiology runs a 1-month program for general anesthesiologists to enhance pediatric anesthesia skills. Pediatric anesthesia fellowship training occurs in Europe, USA, and Australia, or in two 2-year Chilean university programs. Public health policies have increased the medical and surgical pediatric specialists and general anesthesiologists, but not pediatric anesthesiologists, which creates safety concerns for neonates, infants, and medically complex. Chile needs more pediatric anesthesia fellowship programs. Mexico, an upper middle-income country, with a population of about 126 million, has a five-sector healthcare system: public, social security for union workers, state for public employees, armed forces for the military, and a private "self-pay." There are inequities in safety and accessibility for children. Pediatric Anesthesiology fellowship is 2 years, after 3 years residency. A shortage of pediatric anesthesiologists limits accessibility and safety for surgical care, driven by added training at low salary and hospital under appreciation. The Mexican Society of Pediatric Anesthesiology conducts refresher courses, workshops, and case conferences. Insufficient resources and culture limits research.
Critical success factors for ergonomics programs and their relationship to benefits of health and safety in Mexico's manufacturing industries

Julio César Ramos-Rodríguez,Aide Aracely Maldonado-Macías,Arturo Realyvásquez-Vargas,César Omar Balderrama-Armendáriz

DOI: https://doi.org/10.1080/00140139.2024.2403001

IF: 2.5612

2024-09-16

Ergonomics

Abstract:This research determines the critical factors for implementing ergonomics programs related to health and safety benefits in the manufacturing industries of Ciudad Juarez, Mexico, from the middle/upper management perspective. The sample was non-probabilistically selected for convenience, comprising individuals in middle and senior management positions. An original questionnaire containing 105 items measuring five latent variables was developed, reviewed, and validated for data collection. The sample size totalled 206 participants. Structural equation models using partial least squares (PLS) were employed to analyse interrelationships between variables. This research demonstrated acceptable reliability and quality indices. Management commitment emerged as the most significant factor, exerting the highest direct, indirect, and total effects on the work environment and prevention activities, significantly enhancing health and safety benefits. Consequently, manufacturing companies in Juarez City must strive to improve management commitment in the working environment and prevention activities since both strategies can increase employee health and safety benefits.
A survey of beliefs, attitudes, knowledge, and behaviors about evidence-based practice in physical therapists of Latin America: a cross-sectional study

Marco Antonio Morales-Osorio,Leidy T. Ordoñez-Mora,Héctor Gutiérrez-Espinoza,Felipe Araya-Quintanilla,Ana Bays-Moneo,Robinson Ramírez-Vélez

DOI: https://doi.org/10.1038/s41598-024-78703-w

IF: 4.6

2024-11-10

Scientific Reports

Abstract:Evidence-based practice (EBP) refers to the integration of scientific evidence into the clinical setting. This study aimed to determine whether Latin American physiotherapists use EBP, analyze the associated factors, barriers, and facilitators, and examine the relationships between these elements in clinical practice. To conduct this cross-sectional study, the web-based questionnaire survey method was chosen. Survey was self-administered questionnaires to assess understanding of various EBP-related terms and determine their knowledge and ability to apply these concepts in clinical practice. The association between attitudes, awareness, and knowledge scores and the demographic data such as age group, years of experience, professional membership registry, and self-reported education was assessed. The questionnaire was distributed to a total of 5000 physical therapists, of which 4099 (82%) responded from seven Latin American countries (Argentina, Bolivia, Chile, Colombia, México, Perú, and Venezuela), between June 1, 2020, and May 31, 2024. Overall, the physical therapists had positive attitudes, beliefs, and interests in EBP. Their educational background, knowledge, and skills related to assessing and interpreting information were associated to the use of EBP. In addition, 53% of respondents indicated that lack of time was the main obstacle to the use of EBP. The top 3 barriers included insufficient time (53%), lack of information resources (20.8%), and lack of research tools (13.6%). Among Latin American physical therapists, individual characteristics workplace, clinical experience, educational background, and demographic characteristics, may behave as facilitators or barriers when performing an EBP. Thus, identifying methods and strategies to support physical therapists in adopting EBP in the Latin American is necessary. The academization of physiotherapy training might change this in the future.

multidisciplinary sciences
Ergonomic Assessment and Workstation Design in a Furniture Manufacturing Industry—A Case Study

Ana Colim,Paula Carneiro,Nélson Costa,Pedro M. Arezes,Nuno Sousa

DOI: https://doi.org/10.1007/978-3-030-14730-3_44

2019-01-01

Abstract:Ergonomics plays an important role to improve health, safety and productivity at workplaces. Faced with the increasing incidence of Work-related Musculoskeletal Disorders (WMSD), the manufacturing industries had taken multiple initiatives to redesign their workplaces based on ergonomic criteria. In this context, the current study has been carried out in a frame assembly workstation of a large Portuguese site of furniture manufacturing where most of workers were continuously exposed to WMSD risk factors (e.g. repetitive manual tasks and awkward postures) and suffering from some kind of musculoskeletal complaints. The main objective of the current study was to improve the ergonomic conditions of the referred assembly workstation. Based on anthropometric data of Portuguese adult population, an ergonomic assessment of a workstation redesign was developed. To verify the suitability of the redesign, Rapid Upper Limb Assessment (RULA) for both workstations, existing and modified, was applied. The results showed that the ergonomic interventions are essential to reduce the mismatch between workers and workstations physical conditions, contributing to the postural correction and, consequently, to the WMSD prevention.
Ergonomics in Industry: Various Sectors Contributing to the Development of a New Product

Ademario Santos Tavares,Luiz Wilson Nunes de Albuquerque,André Francisco da Silva Sousa,Marcelo Márcio Soares

DOI: https://doi.org/10.54941/ahfe1001221

2022-01-01

Abstract:The process of product development is one of the most important and complex stages for the industry. For a new product to get into the hands of the consumer, a lot of research and testing is performed. Although the intention is to generate a product that makes the difference the market, catches the attention of the consumer and can increase sales of the company, another issue is considered important: the production process. The integration between various areas of knowledge can provide solutions that meet diverse industrial needs that go beyond usability needs of users. This article will deal with a multidisciplinary team during the development of a new medical product. How can segments of knowledge apparently distant from each other work together and provide improvements to the employees of a company? This article shows how teamwork between professionals of Ergonomics, Industrial Design, Engineering, Medical, Production and Sales allowed the optimization of the production process, employee satisfaction and sales success.

Overview of Ergonomics in Latin America

Ergonomics in Latin America: background, trends and challenges.

[Trends in Brazilian Research in Ergology]

Ergonomic Analysis of Safety Signs: a Focus of Informational and Cultural Ergonomics

An applied ergonomics study on IT user interaction in a large hydroelectric company in the northeast of Brazil

Participatory ergonomics intervention for improving human and production outcomes of a Brazilian furniture company

Social construction as a means of ergonomic intervention

Evaluation Of A Work Space Based On An Ergonomic Design Methodology Of The Built Environment

Design and Ergonomics of Package Inserts of Drugs in Brazil: A Reality in Construction

A case study of the implementation of an ergonomics improvement committee in a Brazilian hospital--Challenges and benefits

Work at Height: Neglect or Improvisation in Civil Construction in Brazil and Uruguay?

Proposal of a Guide to Select Methods of Ergonomic Assessment in the Manufacturing Industry in México

Ergonomic And Control Rooms: A Case Study Of A Hydroelectric Enterprise

Indonesia ergonomics roadmap: where we are going?

Ergonomics, development and sustainable work: a look for worker's health

Ergonomic Strategies for Improving Working Conditions in Some Developing Countries in Asia.

Pediatric anesthesiology in Brazil, Chile, and Mexico

Critical success factors for ergonomics programs and their relationship to benefits of health and safety in Mexico's manufacturing industries

A survey of beliefs, attitudes, knowledge, and behaviors about evidence-based practice in physical therapists of Latin America: a cross-sectional study

Ergonomic Assessment and Workstation Design in a Furniture Manufacturing Industry—A Case Study

Ergonomics in Industry: Various Sectors Contributing to the Development of a New Product