Abstract:The concept of co-benefit, a negotiation topic in CO2 mitigation attracts worldwide attention including China in coping with climate change. Energy saving technologies as common measures for CO2 abatement, generally lead to co-benefits of local air pollution (LAP) because most LAP emissions are generated from combustion of carbonic fuels along with CO2. However, in the technological dimension, there are technologies that induce opposite effects on the co-benefit of CO2 and LAP in specific industry sectors. Precalcinating line and shaft kiln, two types of technologies adopted in clinker calcinating procedure in cement industry are examples: the former consume less energy but emit more dust and NOx than the later. As a result, the overall co-benefits of LAP reductions for cement industry are uncertain. This study consequently aims at assessing the overall co-benefit (although it may be a negative co-benefit) of CO2 mitigation policy on dust, NOx, SO2 emissions in China's cement industry aggregately by establishing bottom-up optimization model on the basis of all types of technologies which are called technology system in cement production. CO2 mitigation goal, as represented by reduction rate is regarded as constraint input into the model. In order to investigate the evolution of co-benefits and technology paths with the change of CO2 mitigation goal, hundreds of reduction rates are selected randomly between the range 0.5-10.5%. The lower bound 0.5% reveals CO2 emission reduction that can be reached for cement industry under existing political constraints and without any extra CO2 mitigation goal. The upper bound 10.5% is the greatest reduction rate under which the model could derive feasible solution. According to changes of technology penetration rates as CO2 goal tightens, we could evaluate the more cost-effective technologies from the perspective of co-benefit. They are vertical milling, precalcinating line with the scale of 7000-10,000 ton/day, roll-squeezer belonging to Main Production Technology (MPT), utilization of cement grinding aids, multi-channel coal burner belonging to Affiliated Energy-saving technology (AES), combination of bag-filter and electrostatic precipitator and ultra-low NOx burning technology belonging to Pollution Control Technology (PCT). With respect to the evolution of co-benefits on air pollutions, when the CO2 reduction rate is below 2.3%, co-benefit of dust and SO2 reduction exist while that of NOx does not; and when the rate is above 2.3%, co-benefits of all the three pollutants exist. A practically referable goal of CO2 mitigation rate of short/mid-term is approximately 5.5% in view of the following three considerations: a) co-benefits augment as CO2 reduction rate increases; b) total cost increases as the CO2 abatement goal becomes stricter; and c) the majority of emerging technologies normally cannot penetrate to 100% in cement production within a relatively short time. (C) 2015 Elsevier Ltd. All rights reserved.

Forecasting of COD Reduction Technologies in China's Future Pulp Industry

An Integrated Model for Technology Forecasting to Reduce Pollutant Emission in China's Pulp Industry

Prediction of Industrial Wastewater Discharge and Abatement Expenditure.

Decomposition Analysis of Water Consumption-Related Chemical Oxygen Demand Emission in Chinese Industrial Sectors

Alternative policy assessment for water pollution control in China's pulp and paper industry

Integrated control of emission reductions, energy-saving, and cost-benefit using a multi-objective optimization technique in the pulp and paper industry.

Forecast And Analysis On Reducing China'S Co2 Emissions From Lime Industrial Process

Method for Environmental Management in Paper Industry Based on Pollution Control Technology Simulation

Uncertainty analysis of primary water pollutant control in China's pulp and paper industry

Forecasting Co2 Mitigation And Policy Options For China'S Key Sectors In 2010-2030

Trend of technology innovation in China's coal-fired electricity industry under resource and environmental constraints

Investigation and Optimization Analysis on Deployment of China Coal Chemical Industry under Carbon Emission Constraints

Technology Options for Reducing CO2 in China's Electricity Sector in 2010–2030: from the Perspective of Internal and Social Costs

Technology portfolio assessment for near-zero emission iron and steel industry in China

An analysis of industrial water conservation potential and selection of key technologies based on the IWCPA model

Cost and Potential of Energy Conservation and Collaborative Pollutant Reduction in the Iron and Steel Industry in China

Key technology choices for industrial water conservation in China based on an IWCPA model

Evaluation of energy saving potential in China's cement industry using the Asian-Pacific Integrated Model and the technology promotion policy analysis

Scenario analysis on CO2 emissions reduction potential in China's iron and steel industry

Goal and Technology Path of CO2 Mitigation in China's Cement Industry: from the Perspective of Co-Benefit

A Study on the Actual Potentialities of Reducing Emissions for China's Industries by the Goals Set at the Copenhagen Conference —an Optimization Model Based on China's 2007 Energies-Carbon Emission-Economic Input and Output Table