Inhibition Effect of Propiolic Alcohol on Mild Steel in Mud Acid

Qingze Jiao

2009-01-01

Abstract:The corrosion inhibition of propiolic alcohol on mild steel in mud acid was studied by adsorption theory and electrochemical polarization-curve method. It is shown by that the single molecule layer of propiolic is adsorbed on the surface of the mild steel and the adsorption follows Langmuir isothermal equation; propiolic alcohol is mixed type inhibitor.

What problem does this paper attempt to address?

Experimental and Theoretical Investigation of 1-Hexyl-3-methylimidazolium Iodide As a Corrosion Inhibitor for Mild Steel in HCl Environment

Baoyi Li,Lei Guo,Xueli Bai,Shengjian Zhang,Zerui Zhang,Huiru Zhou,Hongmei Dong,Yusheng Li

DOI: https://doi.org/10.1016/j.ijoes.2024.100580

IF: 1.541

2024-01-01

International Journal of Electrochemical Science

Abstract:This study employed 1-Hexyl-3-methylimidazolium iodide to mitigate the corrosion of Q235 steel in a hydrochloric acid environment. The evaluation of corrosion inhibition effectiveness was comprehensively characterized by combining electrochemical experiments with surface morphology observation. The experimental results demonstrated the capability of the ionic liquid in establishing a film layer on the surface of Q235 steel, which effectively hindered the charge transfer process. Notably, the corrosion inhibition efficiency attained a value of 92.3% at a concentration of 1mM corrosion inhibitor. Moreover, the process of the corrosion inhibitor adhering to the steel surface aligns with the Langmuir isotherm, demonstrating physicochemical adsorption behavior. The density functional theory (DFT) and molecular dynamics (MD) simulation were utilized for further exploration of the corrosion inhibition mechanism, and the results indicate the ionic liquid can be adsorbed onto the (110) surface of Fe in parallel through N atoms on the imidazole ring.
Inhibition Efficiency of 1-Butoxypropan-2-ol against the Corrosion of Mild Steel Exposed to Marine Environment: An Experimental and Microstructural Study

Smrithy Subash,Mayank Garg,Sumedha Moharana,Harpreet Singh Arora

DOI: https://doi.org/10.1007/s11665-024-09280-2

IF: 2.3

2024-03-14

Journal of Materials Engineering and Performance

Abstract:The pursuit of effective corrosion inhibition, both theoretically and experimentally, has a significant impact on the global GDP and climate-related actions in infrastructure management. This current study aims to explore the corrosion reduction and inhibition mechanisms of 1-butoxypropan-2-ol (C 7 H 16 O 2 ) otherwise known as propylene glycol 1- monobutyl ether on mild steel coupons immersed in a marine solution containing 3.5 wt.% NaCl. Three different molar concentrations of the proposed inhibitors were investigated, revealing that the most effective corrosion prevention occurred at a concentration of 100 mM on mild steel coupons. The initial assessment of the inhibition capacity involved gravimetric weight loss measurements, demonstrating an impressive inhibition efficiency of approximately 98%. Additionally, electrochemical analysis using Potentiodynamic Polarization (PDP) and Electrochemical Impedance Spectroscopy (EIS) was conducted. The efficiency of the proposed inhibitor was determined to be around 67% and 78% after fitting the Nyquist and Tafel polarization plots, respectively. Despite the surfactant nature of the proposed inhibitor and the limited area considered for EIS, the results were deemed adequate and satisfactory based on the Tafel and EIS measurements. Microstructural studies were conducted using SEM images to detail variations in the morphology of the surface of both uninhibited and inhibited mild steel samples. The proposed inhibitor demonstrated satisfactory performance, evident through its presence on the surface and reduced NaCl accumulation on the mild steel. All tests were conducted at room temperature with a constant immersion time to ensure optimal outcomes.

materials science, multidisciplinary
Effect of Propargyl Alcohol on Corrosion and Hydrogenation of Steel in Hydrochloric Acid Solution

B. B. Pati,P. Chatterjee,T. B. Singh,D. D. N. Singh

DOI: https://doi.org/10.5006/1.3585116

1990-05-01

CORROSION

Abstract:A study has been made to investigate the effect of propargyl alcohol (PA) on corrosion and hydrogenation of mild steel exposed in hydrochloric acid solution at different temperatures, concentrations, and exposure times. Different ions have been added to the inhibited acid solution to study their roles on the inhibitive performance of the inhibitor. Cr3+ and Cu2+ cations strongly improve the inhibitive performance of the inhibitor on corrosion and hydrogen absorption by steel, whereas As3+, which improves the corrosion inhibitor's efficiency, has an accelerating effect on hydrogen absorption. Propargyl alcohol in combination with Cu2+ and Cr3+ effectively controls the deterioration of tensile strength of steel in acidic solution, but an adverse effect is observed with As3+. Fe3+ has very deleterious action on the inhibitor's performance especially when present at a higher concentration (>2.5% as FeCl3. Addition of certain amino compounds along with PA in acid solution slightly improve the inhibitive performance of the inhibitor. Effectiveness of the inhibitor improves with passage of time and the time required to achieve maximum protection is reduced if Cr3+ and Cu2+ are present along with the inhibitor in the corroding electrolyte.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Inhibition behavior of new ecological corrosion inhibitors for mild steel, copper and aluminum in acidic environment: Theoretical and experimental investigation

Rajae Salim,Elhachmia Ech-chihbi,Yasmine Fernine,Mohammed Koudad,Lei Guo,Elyor Berdimurodov,Mohammad Azam,Zakia Rais,Mustapha Taleb

DOI: https://doi.org/10.1016/j.molliq.2023.123579

IF: 6

2024-01-01

Journal of Molecular Liquids

Abstract:It is well known that the most practical approach to prevent metal from their degradation when it is in contact with aggressive solution is the application of inhibitors. The present work was designed to evaluate the inhibition behavior and the adsorption process of (E)‑1‑(5‑methylfuran‑2‑yl)‑3‑(6‑phenylimidazo[2,1‑b]thiazol‑5‑yl)prop‑2‑en‑1‑one (MF-PIT) for various metals (Copper (Cu), Mild steel (MS), and Aluminum (Al)) in 1 M HCl using electrochemical techniques, surface analysis characterization, and theoretical approaches. Firstly, DFT calculations and molecular dynamic simulation were executed to explore the reactivity of the studied inhibitor, and the adsorption configuration indicated in each metal. Before the experimental test, the environmental toxicity was evaluated and confirmed the safety of using the studied concentration. PDP results showed a good inhibition performance with inhibition efficiency of around 97.5% for copper, 95.9% for Mild steel, and 92.2% for Aluminum at the optimum concentration of 10−4 M. These results confirmed the EIS experiments and revealed that MF-PIT acted as a mixed-type inhibitor for the three metals. The adsorption of MFPIT obeyed the Langmuir isotherm model and form a strong bond with the studied metallic samples. The inhibition performance of MF-PIT showed a good correlation with the theoretical finding.

chemistry, physical,physics, atomic, molecular & chemical
Experimental and Theoretical Studies of the Corrosion Inhibition Performance of a Quaternary Phosphonium-Based Ionic Liquid for Mild Steel in HCl Medium

Lei Guo,Yue Huang,Yundong Wu,Wei Shi,Faheem Abbas,Yuanhua Lin,Riadh Marzouki,Xingwen Zheng

DOI: https://doi.org/10.3390/su15043103

IF: 3.9

2023-02-09

Sustainability

Abstract:The corrosion inhibition performance of a quaternary phosphonium-based ionic liquid, i.e., hexadecyltriphenylphosphonium bromide (HPP), on mild steel in 1 M HCl solution was investigated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP) methods. The surface characterization of mild steel was examined by scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS). The results revealed that the inhibition efficiency increases with its increasing concentration, and it can reach up to 99.1% at the concentration of 0.07 mM HPP. PDP data showed that the absorption of HPP conformed to Langmuir adsorption, which served as a mixed-type inhibitor, involving chemisorption and physisorption. SEM analysis confirmed the formation of barrier film on the metal surface, inhibiting the acid attack. Moreover, density functional theory (DFT) calculations and molecular dynamics (MD) simulations were conducted to elucidate the adsorption mechanism of inhibitor molecules on the mild steel surface. A match between the experimental and theoretical findings was evidenced.

environmental sciences,environmental studies,green & sustainable science & technology
Inhibition effect and mechanism of polyacrylamide for steel corrosion in simulated concrete pore solution

Fangfang Zhi,Linhua Jiang,Ming Jin,Peng Xu,Beibei Xiao,Quanguo Jiang,Lei Chen,Yue Gu

DOI: https://doi.org/10.1016/j.conbuildmat.2020.120425

IF: 7.4

2020-10-01

Construction and Building Materials

Abstract:The research examined the effect of polyacrylamide (PAM) on corrosion inhibition performance for steel in the simulated concrete pore solution. Linear polarization resistance, electrochemical impedance spectroscopy, potentiodynamic polarization, X-ray Photoelectron Spectroscopy and molecular dynamics simulations are performed to investigate the inhibitive effect and mechanism of PAM for steel corrosion. Results reveal that PAM improves the inhibition performance of steel corrosion and the inhibition efficiency increases with PAM content increasing. The maximum inhibition efficiency (about 99%) is achieved when the concentration of PAM is 0.15%. The improvement of corrosion inhibitive performance by PAM is due to the generation of adsorption film on steel, and the adsorption of PAM is following the Langmuir adsorption isotherm. In addition, the inhibition mechanism by PAM on steel corrosion is determined using molecular dynamics simulations.

construction & building technology,materials science, multidisciplinary,engineering, civil
Adsorption and corrosion inhibition performance of two planar rigid pyridinecarboxaldehyde-based double Schiff bases for mild steel in HCl solution: Experimental and computational investigations

Xiao-Long Li,Bin Xie,Chuan Lai,Jian-Shen Feng,Xiao-Qiang Liu,Luo Chen,Yu-Geng Yang,Run-Wu Ji,Jia-Yu He,Wei Li,Meng-Nan Liu

DOI: https://doi.org/10.1016/j.molliq.2022.118926

IF: 6

2022-06-01

Journal of Molecular Liquids

Abstract:Two planar rigid double Schiff bases, (1E,1′E)-N,N'-(1,4-phenylene)bis(1-(pyridin-2- yl)methanimine) (PBPM2) and (1E,1′E)-N,N'-(1,4-phenylene)bis(1-(pyridin-3-yl)methan- imine) (PBPM3), were investigated as corrosion inhibitors for mild steel in HCl solution. The experimental results presented that the inhibition efficiencies in 1.0 mol L−1 HCl slightly negatively correlate with temperature, while positively correlate with inhibitor concentration and soaking time, respectively. The maximum inhibition rates of PBPM2 and PBPM3 obtained by weight loss measurement at 30 °C reach up to 91.88 % and 92.18 %, respectively. The fitting analysis indicated that PBPM2 and PBPM3 conform to Langmuir adsorption isotherm, and physicochemical adsorption mechanism occurred on the surface of mild steel. Potentiodynamic polarization measurement showed that PBPM2 and PBPM3 are mixed-type inhibitors with anodic characteristics. The contact angle and energy dispersive spectroscopy data indicated that the hydrophobicity for mild steel surface is modified by PBPM2 and PBPM3 applied in HCl solution, which causes the formation of the compact protective film on the metallic surface. The structure–activity relationship and protonation behavior were investigated by density functional theory and Fukui indexes. The computational results conformed PBPM3 has higher inhibition performance the PBPM2. Furthermore, molecular dynamics simulation revealed real adsorption configuration of PBPM2 and PBPM3 molecules on mild steel surface and certified that PBPM3 has stronger adsorption capacity and better inhibition performance than PBPM2, which agree with the experimental results.

chemistry, physical,physics, atomic, molecular & chemical
The inhibition performance of heterocyclic compounds on Q235 steel in methanol/formic acid medium: Experimental and theory

Jia Wang,Jinyan Liu,Qian Liu,Yao Chong

DOI: https://doi.org/10.1016/j.molliq.2021.117663

IF: 6

2021-12-01

Journal of Molecular Liquids

Abstract:The present paper discusses the adsorption and inhibitory effect of nitrogen-containing compound, 1-dodecyl-3-methyimidazolium chloride (DMIC), dodecylpyridinium chloride (DPC) and hexadecylpyridinium chloride monohydrate (HDPC) on Q235 steel corrosion in a new system(10 mol·L−1 methanol/0.1 mol·L−1 formic acid medium. The experimental study was carried out using a series of techniques such as weight loss, potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS). contact angle test, Raman spectra, X-ray photoelectron spectroscopy (XPS) and atomic force microscope (AFM) served to identify microscopic variation on Fe surface. Adsorption isotherm model controlling the adsorption process are calculated and discussed. Moreover, the relationships between molecular structure and corrosion inhibition performance of three inhibitors were verified by quantum chemical calculation and molecular dynamics simulation. The results obtained from the electrochemical methods showed that DMIC, DPC and HDPC imparted high resistance and behaved as mixed-type corrosion inhibitors dominated with anode. inhibition efficiency (η%) increased with the increase of inhibitors concentration to attained 88.81%, 92.69%, 93.67% at 0.06 mol·L−1, respectively. Surface studies confirmed the existence of an adsorption film on the metal surface. The obtained results demonstrated that the adsorption process on the metal surface followed the Langmuir adsorption model. Quantum chemical calculations and molecular dynamics simulation (MD) testified the effect of the chemical structure of three inhibitors on its inhibition efficiency, which had a good agreement with the experimental data.

chemistry, physical,physics, atomic, molecular & chemical
Experimental and theoretical study on corrosion inhibition of mild steel by meso-tetraphenyl-porphyrin derivatives in acid solution

Messaoud Meraghni,Touhami Lanez,Elhafnaoui Lanez,Lazhar Bechki,Ali Kennoufa

DOI: https://doi.org/10.5599/jese.1400

2022-09-06

Journal of Electrochemical Science and Engineering

Abstract:The inhibition effect of meso-tetraphenyl-porphyrin (TPPH2), meso-tetra4-methophenyl-porphyrin TPPH2(p-Me), and meso-tetra4-actophenyl-porphyrin (TAcPPH2) on the corrosion of XC52 mild steel in aerated 0.5 M aqueous sulfuric acid solution was studied by potentiodynamic polarization experiments and quantum chemical calculations. Results from potentiodynamic polarization showed that inhibition efficiency of three compounds increased upon increasing of the inhibitor concentration and they are acting as mixed type inhibitors, having dominant anodic reactions. Adsorption of all compounds follows the Langmuir adsorption isotherm with moderate values of free energy of adsorption. Quantum chemical calculation using DFT/B3LYP method confirmed a strong bond between meso-tetraphenyl-porphyrins and mild steel surface. The inhibition mechanism was also determined by the potential of zero charge (PZC) measurement at the metal/solution interface.
The Inhibition of Mild Steel Corrosion in 0.5 M H2SO4 Solution by Radish Leaf Extract

Dongyi Li,Panpan Zhang,Xinyu Guo,Xiaowei Zhao,Ying Xu

DOI: https://doi.org/10.1039/c9ra04218k

IF: 4.036

2019-01-01

RSC Advances

Abstract:The inhibitory effect of radish leaf extract (RLE) on mild steel corrosion in 0.5 M H2SO4 was studied by the weight loss method and the electrochemical method. The results demonstrated that the efficiency of inhibition increased with an increase in the concentration of RLE and decreased with an increase in temperature. The inhibition performance reached 93% with 300 mg L-1 at 298 K. RLE behaved as a mixed-type inhibitor based on the cathode. The inhibition mechanism involved the adsorption of the active ingredients of RLE on the mild steel surface to prevent corrosion. The adsorption followed the Langmuir adsorption isotherm, and physical and chemical adsorption coexisted. The results were supported by SEM, quantum chemical calculations, FTIR and UV-visible spectroscopy analyses.
Nicotinic acid derivatives as corrosion inhibitors for mild steel in hydrochloric acid solutions: an experimental and computational chemistry study

Xia Liu,Xuemei Pan,Meiheng Lu,Yue Sun,Zhengbin Wang,Yugui Zheng

DOI: https://doi.org/10.1080/01694243.2020.1787934

IF: 2.431

2020-07-06

Journal of Adhesion Science and Technology

Abstract:The inhibition performance and mechanism of nicotinic acid (NA), nicotinic acid amide (NAA) and 4-methoxypyridine (MP) for the corrosion of mild steel in 0.5 M HCl solution were investigated and compared by means of experimental tests, including potentiodynamic polarization and electrochemical impedance spectroscopy measurements, surface analyses and quantum chemistry calculation. The electrochemical results show that the inhibition efficiencies of the three inhibitors increase with the concentration and decrease with the temperature. The NAA and MP inhibitors exhibit the highest and lowest efficiency and activation energy for the corrosion process, respectively, which is confirmed by the corrosion morphology observation. Fourier transform infrared analysis and X-ray photoelectron spectroscopy (XPS) analysis confirm the spontaneous adsorption of all three inhibitors on the surface. The adsorption analysis demonstrates that the adsorption process follows Langmuir model and consists of both physisorption and chemisorption. The quantum chemistry calculation correlates the molecular structures and charge density distributions with the corrosion inhibition efficiencies of NAA, NA and MP inhibitors, and further proves that the good inhibition performance of NAA inhibitor originates its high adsorption ability.

materials science, multidisciplinary,engineering, chemical,mechanics
An effective and smart corrosion inhibitor in acidic environment: Experimental & theoretical studies

Asmae Bouoidina,Rajesh Haldhar,Rajae Salim,Elhachmia Ech-chihbi,Hamza Ichou,Fadoua El-Hajjaji,Seong-Cheol Kim,Brahim El Ibrahimi,Savas Kaya,Mustapha Taleb

DOI: https://doi.org/10.1007/s11814-022-1246-5

IF: 2.7

2023-01-01

Korean Journal of Chemical Engineering

Abstract:The application of corrosion inhibitors is the best way to protect metals from degradation. Therefore, the P-anisidine molecule was investigated as a corrosion inhibitor for mild steel in a 1 M HCl medium. This study used different methods, such as electrochemical impedance spectroscopy, polarization potentiodynamic curves, scanning electron microscopy, and theoretical method. The addition of this molecule to the aggressive medium achieved inhibition of 81% at a concentration of 10−3M. The potentiodynamic polarization curves reveal a mixed type character (anodic and cathodic) and adsorb on the metal surface according to Langmuir adsorption isotherm. This adsorption was also proved by scanning electron microscopy proving the presence of a protective layer on the steel surface used. The theoretical results confirmed the experimental part and showed that P-anisidine adsorbed parallel onto the steel surface covering a large surface area.

engineering, chemical,chemistry, multidisciplinary
Corrosion inhibition performance of synergistic inhibitors on Q235 steel in methanol/formic acid medium

Jia Wang,Jinyan Liu,Qian Liu,Yao Chong

DOI: https://doi.org/10.1007/s10853-022-07629-3

IF: 4.5

2022-08-23

Journal of Materials Science

Abstract:The corrosion inhibition behaviors of dodecylpyridinium chloride (DPC), hexadecylpyridinium chloride monohydrate (HDPC), and the rosin amino acid surfactants dehydroabietic acylamino sodium (6-DAS) and compounds (6-DAS/DPC and 6-DAS/HDPC) were investigated by weight loss measurements and electrochemical testing. Besides, corrosion inhibition performance was further verified by combining a series of surface properties analyses and theoretical calculations. The weight loss results showed that the increase in inhibition efficiency was mainly attributed to its high concentration and revealed that the inhibition efficiency of compound inhibitors was higher than that of single inhibitor 6-DAS (92.23%), which was up to 95.86% and 96.72% of 6-DAS/DPC and 6-DAS/HDPC at 1:8 concentration ratio, respectively. The potential polarization curve potential demonstrated that single inhibitor 6-DAS and compound inhibitors (6-DAS/DPC and 6-DAS/HDPC) were both mixed-type corrosion inhibitors dominated by the anode. Thus, among the three, 6-DAS/HDPC had the best corrosion inhibition performance, and the average inhibition efficiency was 96.90%. Surface studies presented the adsorption of inhibitor molecules adhered on the Fe surface, while the adsorption performance of compound inhibitors appeared to be superior to single inhibitor 6-DAS. Moreover, it was found that there were a few excellent data from molecular dynamics simulation about the adsorption energies of inhibitors that could also explain the corrosion inhibitor performance, the results of which had good agreement with the experimental data, which provided strong evidence for the close relationship between the molecular structure of inhibitor and its inhibition efficiency.

materials science, multidisciplinary
Inhibitory effects of 1-butylpyridin-1-ium bromide in 0.1 M sulphamic acid for mild steel

Smitha Shree S,Srilatha Rao,A.S. Sowmyashree,G.K. Prashanth,Vidhyashree Kumbla,T. Aravinda

DOI: https://doi.org/10.1080/00084433.2024.2306011

2024-01-30

Canadian Metallurgical Quarterly

Abstract:In recent years, there has been a consistent development in the introduction of novel corrosion inhibitors due to their potential to reduce the dissolution of metal surfaces under various corrosive environments. The current study investigates the inhibitory effect of the surfactant 1-butylpyridin-1-ium bromide (BPB) on mild steel (MS) in 0.1 M sulphamic acid. The electrochemical impedance spectroscopy (EIS) and potentiodynamic polarisation (PDP) studies were used to analyse the inhibition investigations. In addition, atomic force microscopy (AFM), scanning electron microscopy (SEM) and contact angle (CA) measurements were also used to analyse the inhibition investigations. The PDP studies showed a maximum inhibition efficiency of 63.3% at 400 ppm concentration, demonstrating the inhibitor's efficacy. The investigated compound was found to comply with the Temkin adsorption isotherm with an R 2 value of 0.99954. The results of PDP tests firmly suggest that the inhibitor is of mixed type. Δ G ads values of −9.659 kJ mol −1 suggested that the inhibitor adhered to the metal surface by physical adsorption. Based on the findings it appears that the molecules adhere to the surface of MS forming partial hydrophobic films that act as a barrier for the metal surface.

metallurgy & metallurgical engineering
Corrosion Inhibition Potential of New Oxo-pyrimidine Derivative on Mild Steel in Acidic Solution: Experimental and Theoretical Approaches

Mothana Ghazi Kadhim AlFalah,Mehmet Izzettin Yilmazer,Khalid Saed Melad Ferag,Murat Saracoglu,Zulbiye Kokbudak,Fatma Kandemirli

DOI: https://doi.org/10.1016/j.molstruc.2024.138773

IF: 3.841

2024-05-31

Journal of Molecular Structure

Abstract:Through electrochemical impedance testing and potentiodynamic polarisation, it was investigated how a material at ambient temperature might prevent corrosion. 1-(5-(4-Methoxybenzoyl)-4-(4-methoxyphenyl)-2-oxopyrimidin-1(2 H )-yl)-3-(4-chlorophenyl) urea (MMOP) was used as a corrosion inhibitor on mild steel samples in 1 M HCl. With a maximum inhibition efficacy of 97.6% (at immersion period of 72 h and concentration of 5 × 10 -4 M), the inhibitor used was shown to be an exceptional corrosion inhibitor. Based on the findings of potentiometric polarization, this substance falls within the category of mixed inhibitors since corrosion inhibition was accomplished by the inhibitor adhering to the metal. Adsorption of investigated MMOP completely followed Langmuir adsorption isotherm and adsorption can be categorized as physisorption–chemisorption, with a value of ΔG ads of -35.6 kJ.mol -1 . In order to confirm the effectiveness of the protective coating applied to the mild steel surface, we analysed the protective layer through the utilization of Atomic Force Microscopy (AFM) and Scanning Electron Microscope (SEM) / Energy Dispersive X-ray spectrometry (EDX). The density functional theory (DFT) and Monte Carlo simulation (MCS) approaches were used to investigate the relationship between molecular structure and inhibitory efficacy. The results suggest that the inhibitor in issue could be a new approach to reducing mild steel corrosion under harsh circumstances and long immersion times.

chemistry, physical
Quinoxaline Derivatives as Newly Acid Corrosion Inhibitors for Mild Steel: Synthesis, Electrochemical, and Theoretical Investigations

Rbaa, M.,Zarrouk, A.

DOI: https://doi.org/10.1007/s40735-023-00750-z

2023-03-18

Journal of Bio- and Tribo-Corrosion

Abstract:The inhibition effect of novel quinoxaline-derived compounds (Q3 and Q4) on the corrosion of mild steel in 1.0 M HCl solution was studied using gravimetry, potentiodynamic polarization and electrochemical impedance spectroscopy. The impact of temperature and inhibitor concentration was studied to illustrate the mechanism of inhibition. The data showed that quinoxaline derivatives (Q3 and Q4) are good inhibitors of mild steel corrosion in 1.0 M HCl solution. The inhibition is based on the adsorption of the steel into the HCl solution. The inhibition is based on adsorption phenomena, which is consistent with the Langmuir adsorption model. The inhibition efficiency increases with the concentration of Q3 and Q4 to reach a maximum value of 96.9% and 95.7%, respectively, at 0.001 M and 25 °C. Potentiodynamic polarization data confirmed that quinoxaline derivatives behave as a mixed-type inhibitor. Thermodynamic parameters indicate that both quinoxaline compounds (Q3 and Q4) are adsorbed on the steel surface due to the Langmuir isotherm. DFT calculations and DM simulations were performed on the quinoxaline-derived inhibitor to correlate with the experimental data. The results obtained by the different methods are in good agreement.
The inhibitor effect of migrating corrosion inhibitors on Q235 steel in high alkaline environment under cathodic polarization

Hang Jia,Zhiming Gao,Shixiong Wu,Jia Liang Liu,Wenbin Hu

DOI: https://doi.org/10.1108/acmm-02-2024-2972

2024-04-26

Anti-Corrosion Methods and Materials

Abstract:Purpose This study aims to investigate the corrosion inhibitor effect of migrating corrosion inhibitor (MCI) on Q235 steel in high alkaline environment under cathodic polarization. Design/methodology/approach This study investigated the electrochemical characteristics of Q235 steel with and without MCI by polarization curve and electrochemical impedance spectroscopy. Besides, the surface composition of Q235 steel under different environments was analyzed by X-ray photoelectron spectroscopy. In addition, the migration characteristic of MCI and the adsorption behavior of MCI under cathodic polarization were studied using Raman spectroscopy. Findings Diethanolamine (DEA) and N, N-dimethylethanolamine (DMEA) can inhibit the increase of Fe(II) in the oxide film of Q235 steel under cathodic polarization. The adsorption stability of DMEA film was higher under cathodic polarization potential, showing a higher corrosion inhibition ability. The corrosion inhibition mechanism of DEA and DMEA under cathodic polarization potential was proposed. Originality/value The MCI has a broad application prospect in the repair of damaged reinforced concrete due to its unique migratory characteristics. The interaction between MCIs, rebar and concrete with different compositions has been studied, but the passivation behavior of the steel interface in the presence of both the migrating electric field and corrosion inhibitors has been neglected. And it was investigated in this paper.

metallurgy & metallurgical engineering
Inhibitive Action of Propargyl Alcohol for SCC of Austenitic Stainless Steel

Lin Niu,Haichao Lin,Chunan Cao,Guangling Song

DOI: https://doi.org/10.3724/j.issn.1000-0518.1997.6.5759

1997-01-01

Abstract:The SCC susceptibility of 1Cr18Ni9Ti austenitic stainless steel in 0.5 mol/L HCl+0.5 mol/L NaCl solution and the inhibiting effects of propargyl alcohol(PA)on SCC and general corrosion were investigated by slow strain rate tests(SSRT), polarization curves and electrochemical impedance spectroscopy(EIS). The results indicated that the inhibitive action of PA can be attributed to its adsorption and inhibiting effects on the anodic reaction of metal dissolution due to the effect of blocking the active sites on metal surface.
Corrosion Inhibition of Carbon Steel by Some Schiff Base Compounds in HCl and H2SO4 Solutions

Maryam Iranpour,Ali Babaei,Mojtaba Bagherzadeh

DOI: https://doi.org/10.1002/slct.202305180

2024-04-12

ChemistrySelect

Abstract:The inhibition power of two Schiff bases on carbon steel corrosion in 1 M HCl and 0.5 M H2SO4 solutions has been investigated using weight loss, Tafel polarization, and electrochemical impedance spectroscopy techniques. The results revealed that increasing the concentration of inhibitors in acidic solutions led to a higher inhibition efficiency. The inhibition power of two Schiff bases on carbon steel corrosion in 1 M HCl and 0.5 M H2SO4 solutions has been investigated using weight loss, Tafel polarization, and electrochemical impedance spectroscopy techniques. The results revealed that increasing the concentration of inhibitors in acidic solutions led to a higher inhibition efficiency. The polarization curves indicated that the Schiff bases acted as mixed inhibitors, affecting both the cathodic and anodic reactions. The adsorption of the inhibitors on the carbon steel surface followed the Langmuir adsorption isotherm, and various adsorption isotherm parameters such as Kads, ΔGads, ΔHads, and ΔSads were determined at room temperature. Furthermore, the effect of temperature on the inhibitors′ performance was examined within the range of 25–45 °C. The corrosion‐related activation energy, pre‐exponential factor (k), activation enthalpy, and entropy were calculated to assess the inhibitors′ behavior. Scanning electron microscopy (SEM) was employed to examine some carbon steel samples, revealing differences in inhibition efficiency attributed to the inhibitors′ chemical structure. The results highlighted the highest inhibition efficiency in H2SO4 medium at 93.4 %, with a corresponding free energy of 39.51 KJ/mol indicating physical‐chemical adsorption of inhibitor molecules. Furthermore, an enthalpy value of −40.6 KJ/mol suggested an exothermic inhibitor absorption process. The findings are presented and discussed in detail.

chemistry, multidisciplinary
Experimental and Theoretical Study on the Synergistic Inhibition Effect of Pyridine Derivatives and Sulfur-Containing Compounds on the Corrosion of Carbon Steel in CO2-Saturated 3.5 wt.% NaCl Solution

Junlei Tang,Yuxin Hu,Zhongzhi Han,Hu Wang,Yuanqiang Zhu,Yuan Wang,Zhen Nie,Yingying Wang

DOI: https://doi.org/10.3390/molecules23123270

IF: 4.6

2018-12-11

Molecules

Abstract:The corrosion inhibition performance of pyridine derivatives (4-methylpyridine and its quaternary ammonium salts) and sulfur-containing compounds (thiourea and mercaptoethanol) with different molar ratios on carbon steel in CO2-saturated 3.5 wt.% NaCl solution was investigated by weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy, and scanning electron microscopy. The synergistic corrosion inhibition mechanism of mixed inhibitors was elucidated by the theoretical calculation and simulation. The molecules of pyridine derivative compounds with a larger volume has priority to adsorb on the metal surface, while the molecules of sulfur-containing compounds with a smaller volume fill in vacancies. A dense adsorption film would be formed when 4-PQ and sulfur-containing compounds are added at a proper mole ratio.

chemistry, multidisciplinary,biochemistry & molecular biology

Inhibition Effect of Propiolic Alcohol on Mild Steel in Mud Acid

Experimental and Theoretical Investigation of 1-Hexyl-3-methylimidazolium Iodide As a Corrosion Inhibitor for Mild Steel in HCl Environment

Inhibition Efficiency of 1-Butoxypropan-2-ol against the Corrosion of Mild Steel Exposed to Marine Environment: An Experimental and Microstructural Study

Effect of Propargyl Alcohol on Corrosion and Hydrogenation of Steel in Hydrochloric Acid Solution

Inhibition behavior of new ecological corrosion inhibitors for mild steel, copper and aluminum in acidic environment: Theoretical and experimental investigation

Experimental and Theoretical Studies of the Corrosion Inhibition Performance of a Quaternary Phosphonium-Based Ionic Liquid for Mild Steel in HCl Medium

Inhibition effect and mechanism of polyacrylamide for steel corrosion in simulated concrete pore solution

Adsorption and corrosion inhibition performance of two planar rigid pyridinecarboxaldehyde-based double Schiff bases for mild steel in HCl solution: Experimental and computational investigations

The inhibition performance of heterocyclic compounds on Q235 steel in methanol/formic acid medium: Experimental and theory

Experimental and theoretical study on corrosion inhibition of mild steel by meso-tetraphenyl-porphyrin derivatives in acid solution

The Inhibition of Mild Steel Corrosion in 0.5 M H2SO4 Solution by Radish Leaf Extract

Nicotinic acid derivatives as corrosion inhibitors for mild steel in hydrochloric acid solutions: an experimental and computational chemistry study

An effective and smart corrosion inhibitor in acidic environment: Experimental & theoretical studies

Corrosion inhibition performance of synergistic inhibitors on Q235 steel in methanol/formic acid medium

Inhibitory effects of 1-butylpyridin-1-ium bromide in 0.1 M sulphamic acid for mild steel

Corrosion Inhibition Potential of New Oxo-pyrimidine Derivative on Mild Steel in Acidic Solution: Experimental and Theoretical Approaches

Quinoxaline Derivatives as Newly Acid Corrosion Inhibitors for Mild Steel: Synthesis, Electrochemical, and Theoretical Investigations

The inhibitor effect of migrating corrosion inhibitors on Q235 steel in high alkaline environment under cathodic polarization

Inhibitive Action of Propargyl Alcohol for SCC of Austenitic Stainless Steel

Corrosion Inhibition of Carbon Steel by Some Schiff Base Compounds in HCl and H2SO4 Solutions

Experimental and Theoretical Study on the Synergistic Inhibition Effect of Pyridine Derivatives and Sulfur-Containing Compounds on the Corrosion of Carbon Steel in CO2-Saturated 3.5 wt.% NaCl Solution