Consideration of Some Problems in Near Infrared Spectra Analysis

Yong Shi,Potao Sun

2001-01-01

Abstract:Recently near\|infrared analysis has developed rapidly because it can provide effective information about samples.In order to obtain better results,it is important to consider sample's characteristics,experimental design and data analysis.

What problem does this paper attempt to address?

Application of Near Infrared Spectroscopy in Nondestructive Quality Inspection of Agricultural Products

Zhengjun Qiu,Lei Feng,Weimin Li,Yong He

DOI: https://doi.org/10.1117/12.651581

2005-01-01

Abstract:In recent years, near-infrared (NIR) spectroscopy has gained wide acceptance in different fields by its advantages over other analytical techniques. NIR techniques have the ability to record spectrum for solid and liquid samples with rapid speed and non-destruction. This article discusses the features and development of NIR spectroscopy in the last few years; the analysis procedure and some mathematical tools to acquire specific information; some NIR techniques and new equipment that adopted in agriculture fields; the application of NIR in quality inspection of agricultural products, such as cereal, fruits, vegetables, and animal products; the application prospect of NIR spectroscopy in modern agriculture. As a rapid-response analytical tool, NIR spectroscopy may plays an important role in quality inspection of agricultural products.
The Applications of Near-infrared Reflectance Spectroscopy in Plant Breeding and Germplasm Research

吴建国,石春海

DOI: https://doi.org/10.3969/j.issn.1672-1810.2003.01.015

2003-01-01

Abstract:Recently, the applications of near-infrared reflectance spectroscopy (NIRS) in quality analysis are more active in plant breeding. The applications of NIRS in quality analysis and evaluation of germplasm, plant breeding programs, etc. were discussed.
A Study on the Use of Near-Infrared Spectroscopy for the Rapid Quantification of Major Compounds in Tanreqing Injection

Wenlong Li,Zhiwei Cheng,Yuefei Wang,Haibin Qu

DOI: https://doi.org/10.1016/j.saa.2012.09.044

2013-01-01

Abstract:In this paper we describe the strategy used in the development and validation of a near infrared spectroscopy method for the rapid determination of baicalin, chlorogenic acid, ursodeoxycholic acid (UDCA), chenodeoxycholic acid (CDCA), and the total solid contents (TSCs) in the Tanreqing injection. To increase the representativeness of calibration sample set, a concentrating-diluting method was adopted to artificially prepare samples. Partial least square regression (PLSR) was used to establish calibration models, with which the five quality indicators can be determined with satisfied accuracy and repeatability. In addition, the slope/bias (S/B) method was used for the models transfer between two different types of NIR instruments from the same manufacturer, which is contributing to enlarge the application range of the established models. With the presented method, a great deal of time, effort and money can be saved when large amounts of Tanreqing injection samples need to be analyzed in a relatively short period of time, which is of great significance to the traditional Chinese medicine (TCM) industries.
Study on the Influence of Temperature on Near Infrared Spectra

Jiang Huan-yu,Xie Li-juan,Peng Yong-shi,Ying Yi-bin

DOI: https://doi.org/10.3964/j.issn.1000-0593.2008.07.016

2008-01-01

Abstract:Near-infrared (NIR) spectroscopy technique is one of qualitative and quantitative analysis techniques that were developed quickly in recent years. However, the characteristic of NIR spectral region determines its low absorbance, low sign-to-noise and peak overlapping, which results in the phenomenon that th NIR spectrum is affected by sample source, sample varieties, sample state, location and sample temperature and uncertainty of spectrum. In this paper, the influence of temperature on NIR spectra was studied and calibration and validation models of chlorophyll at different temperatures were built. The results show that temperature does have effect on the model precision. High precision could be achieved at 10 and 20 degrees C and the former was the best though using more principal components. Calibration and validation precisions of models were poor when it was 25 degrees C. At the same time, spectra obtained at different temperatures were classified using discriminate analysis. It was found that the spectra were misclassified exception ones obtained at 20 degrees C which meant that there were not clear differences between the spectra exception the ones at 20 degrees C. The primary research work about the condition and application of detecting leaves was studied which helps to provide theory foundation for proposing temperature modification model in the future.
A Review of Application of Near-infrared Spectroscopy in Food Detection and Quality Control

Li Zong-peng,Wang Jian,Song Quan-hou,Yin Jian-jun,Hou Yu-zhu,Zhang Ying

DOI: https://doi.org/10.13995/j.cnki.11-1802/ts.2012.08.005

2012-01-01

Abstract:Near-infrared spectroscopy(NIRS) is a rapid,non-destructive technology and developed rapidly in recent years.It has been successfully applied to many fields in overseas and plays a significant role in detecting.This paper summarizes the latest progress in application of near-infrared spectroscopy in the inspection of daily food such as alcohol,milk,milk powder,meat,edible oil,condiment and others.A description of the application in production process and finished product is presented.Finally,this article analyzes the problems existing in practical applications and proposes its prospects in Chinese food market.
Factors Influencing Near Infrared Spectroscopy Analysis of Agro-Products: a Review

Xiao Xu,Lijuan Xie,Yibin Ying

DOI: https://doi.org/10.15302/j-fase-2019255

2019-01-01

Frontiers of Agricultural Science and Engineering

Abstract:The near infrared (NIR) spectroscopy technique has wide applications in agriculture with the advantages of being nondestructive, sensitive, safe and rapid. However, there are still more than 40 error sources influencing the robustness and accuracy of its calibration and operation. Environmental, sample and instrument factors that influence the analysis are discussed in this review, including temperature, humidity and other factors that introduce uncertainty. Error sources from livestock products, fruit and vegetables, which are the most common objects in the field of NIR analysis, are also emphasized in the second part. In addition, studies utilizing different instruments, spectral pretreatments, variable selection methods, wavelength ranges, detection modes and calibration methods are tabulated to illustrate the complications they introduce and how they influence NIR analysis. It is suggested that large scale of data with abundant varieties can be used to build a more robust calibration model, in order to improve the robustness and accuracy of the NIR analytical model, and overcome problems caused by confining analysis to too many uniform samples.
A local pre-processing method for near-infrared spectra, combined with spectral segmentation and standard normal variate transformation

Yiming Bi,Kailong Yuan,Weiqiang Xiao,Jizhong Wu,Chunyun Shi,Jun Xia,Guohai Chu,Guangxin Zhang,Guojun Zhou

DOI: https://doi.org/10.1016/j.aca.2016.01.010

IF: 6.911

2016-01-01

Analytica Chimica Acta

Abstract:Pre-processing of near-infrared (NIR) spectral data has become a necessary part of chemometrics modeling and is widely used in many practical applications. The objective of the pre-processing is to remove physical phenomena in the spectra in order to improve subsequent qualitative or quantitative analysis. Herein, a localized version of standard normal variate (SNV) is proposed, in which the correction parameters are estimated from local spectral areas. The method of determining the optimal spectral segmentation is also presented. Compared with full range methods, the local method demonstrates advantages in spectral linearity correction, model interpretation and prediction accuracy. Several benchmark NIR data sets were studied in our experiments; the proposed method achieved comparable performance against proven full range methods, with the reduction of prediction errors being statistically significant in many cases.
Application Progress on Near Infrared Spectroscopy in Quality Control and Process Monitoring of Traditional Chinese Medicine

Wenlong Li,Haibin Qu

DOI: https://doi.org/10.3785/j.issn.1008-9292.2017.02.12

2017-01-01

Abstract:The industry of traditional Chinese medicine (TCM) encounters problems like quality fluctuation of raw materials and unstandardized production process.Near infrared (NIR) spectroscopy technology is widely used in quality control of TCM because of its abundant information, fast and nondestructive characters.The main applications include quantitative analysis of Chinese medicinal materials, intermediates and Chinese patent medicines;the authenticity of TCM, species, origins and manufacturers;monitoring and control of the extraction, alcohol precipitation, column chromatography and blending process.This article reviews the progress on the application of NIR spectroscopy technology in TCM field.In view of the problems existing in the application, the article proposes that the standardization of NIR analysis method should be developed according to specific characteristics of TCM, which will promote the application of NIR technology in the TCM industry.
A Review of Data Analysis Techniques Used in Near-Infrared Spectroscopy

K. Tutuncu,Özcan Çataltas

DOI: https://doi.org/10.31590/EJOSAT.882749

2021-07-08

European Journal of Science and Technology

Abstract:Although the analysis of the structure of objects and the components that makeup them has been done for decades, it is one of today's research topics to do this analysis quickly and without damaging the sample. Near-infrared spectroscopy is used in many areas due to its non-contact measurement, fast analysis, and high accuracy features. Near-infrared spectroscopy is used in the classification or quality analysis of products, especially in the agriculture and food sector, due to the chemical bonds interacting in this region. The most critical part of achieving a successful result in near-infrared spectroscopy is pre-processing and analyzing the spectral data using the correct method. In this review, we perform a survey of recent studies that use near-infrared spectroscopy in food production and agriculture. Since there are many studies in this field in the literature, the survey is limited to cover works in the last five years. The review's main question is the pre-processing and data analysis methods used in these studies and the main features of these methods. Among the examined studies, the most frequently used pre-processing method was standard normal variate, and the most frequently used analysis method was partial least squares regression. In addition, the software tools and the spectrum range were also examined within the scope of the study.

Mathematics,Physics
Design of an FT-NIR Spectrometer for Online Quality Analysis of Traditional Chinese Medicine Manufacturing Process

Ren Zhu,Lan Wu,Shiming Wang,Linhua Ye,Zhihua Ding

DOI: https://doi.org/10.1117/12.757261

2007-01-01

Abstract:As a fast, non-destructive analysis method, Fourier transform (FT) near-infrared (NIR) spectroscopy is very suitable and effective for online quality analysis of traditional Chinese medicine (TCM) manufacturing process. In this thesis, the theoretics of FT-NIRS was analyzed and an FT-NIR spectrometer with 4 cm(-1) resolution in the 12500-5000 cm(-1) frequency range was designed. The spectrometer was based on a Michelson interferometer with Bromine tungsten lamp as the NIR light source and InGaAs detector to collect the interference signal. Each element was designed and chosen to provide maximum sensitivity in the NIR spectral region. A fiber-optic flow cell system was used to realize online analysis of traditional Chinese medicine. The performance of the spectrometer was evaluated and the feasibility of using FT-NIR spectrometer to get absorption spectra of traditional Chinese medicine was demonstrated.
[Research Progress on Standardization Study of NIR Spectroscopy Based Method for Quality Control of Traditional Chinese Medicine].

Wen-Long Li,Hai-Bin Qu

DOI: https://doi.org/10.4268/cjcmm20161903

2016-01-01

Abstract:In recent years, the near infrared (NIR) spectroscopy has gained wide acceptance within the quantitative analysis of traditional Chinese medicine (TCM). However, the lack of technical standards is the bottleneck problem in this process. To address this issue, standardization study of the NIR spectroscopy based method for the quantitative analysis of TCM is needed, in which the specific characteristics of TCM should be given full considerations. The main research contents include:the scope definition for the application of NIR spectroscopy in the TCM quantitative analysis field, the selection criteria for the sample pretreatment and spectral acquisition conditions, the rules for the model optimization and evaluation, and the regulations for the model update and transfer. In this paper, some foreign studies in the agricultural areas are reviewed for reference. Different chemometrics methods reported in the literature are investigated and compared systematically. This research is important actual significance to the theoretical development of NIR spectroscopy analytical techniques, and will effectively promote the application of the technology in the TCM industry. Furthermore, it is beneficial to improve the technical level of TCM quality control, and can also be used as references to achieve similar purposes for other natural products.
[Study on fast quality control in extracting process of Paeonia lactiflora using near infrared spectroscopy].

Xueying Chen,Yerui Li,Yong Chen,Longhu Wang,Changhai Sun,Xuesong Liu

2009-01-01

Abstract:OBJECTIVE:To set up a novel method for fast analysis of active components in water extracting process of Paeonia lactiflora with near infrared spectroscopy (NIRS). METHOD:HPLC was used as the reference method to determine the content of Paeoniflorin and a multivariate calibration model based on PLS algorithm was developed to analyze the correlation between the spectra and the corresponding values determined by the reference method. RESULT:The correlation coefficient of the calibration model was 0.996 2, and the predicted coefficient was 0.989 5. The RMSEC and RMSEP were 0.109 g x L(-1) and 0.138 g x L(-1), respectively, and the RSEP was 5.6%. CONCLUSION:The method mentioned above is proved to be convenient, rapid and nondestructive, accurate and reliable, and is applicable for fast analysis and monitoring of active components in extraction process of traditional Chinese medicine.
Application of Near Infrared Spectra Technique for Non-destructive Measurement on Fields of Agriculture and Food

BAO Ying-shi,JIANG Huan-yu,WU Xiao-lian

DOI: https://doi.org/10.3969/j.issn.1003-188x.2006.10.056

2006-01-01

Abstract:The paper is about the application of near infrared (NIR) spectra technique for non-destructive mea- surement on field of agriculture and food. The principle of NIR spectra is briefly introduced and the latest study of this field is described in the paper. Some considerable aspects existing in the researches are also pointed out. Then the possible research trend for the future is assumed at the end of the paper.
Application of Near Infrared Spectroscopy in Oil Quality Analysis

姚成,高俊

DOI: https://doi.org/10.3969/j.issn.1672-1292.2004.02.001

2004-01-01

Abstract:The article analyzed the working theory in the application of near infrared spectrum and briefly discussed several common technologies in qualitative and quantitative analysis of near infrared spectroscopy. Quantitative analysis methods include multivariate linear regression, principal component regression, partial least squares method and artificial neural network etc ; qualitative analysis methods include NIR spectrum peak position identification, pattern recognition etc , and all these methods are compared. Moreover, the article introduced some achievements in application in gasoline, diesel oil quality analysis with near infrared spectroscopy. Near infrared spectroscopy methods are efficient and convenient for the application of analysis of oil quality, it has considerable applied value in industry.
Near-Infrared-II Bioimaging for in Vivo Quantitative Analysis

Sha Yang,Xiaofeng Tan,Li Tang,Qinglai Yang

DOI: https://doi.org/10.3389/fchem.2021.763495

IF: 5.5

2021-11-15

Frontiers in Chemistry

Abstract:Near-Infrared-II (NIR-II) bioimaging is a newly emerging visualization modality in real-time investigations of biological processes research. Owning to advances in reducing photon scattering and low tissue autofluorescence levels in NIR-II region (1,000–1700 nm), NIR-II bioimaging affords high resolution with increasing tissue penetration depth, and it shows greater application potential for in vivo detection to obtain more detailed qualitative and quantitative parameters. Herein, this review summarizes recent progresses made on NIR-II bioimaging for quantitative analysis. These emergences of various NIR-II fluorescence, photoacoustic (PA), luminescence lifetime imaging probes and their quantitative analysis applications are comprehensively discussed, and perspectives on potential challenges facing in this direction are also raised.

chemistry, multidisciplinary
Application of Near-infrared Spectroscopy in Food and Medicine Analysis

ZHOU De-cheng,LIU Mu-qing,ZHOU Xiao-li,HAN Lei

DOI: https://doi.org/10.3969/j.issn.1672-8785.2006.03.006

2006-01-01

Abstract:Near-Infrared Spectroscopy can provide fast, precise qualitative and quantitative analysis without damaging samples and has more advantages over the traditional chemical experimental methods. So, it has great use values in food and medicine analysis.
Infrared Spectroscopy—Mid-infrared, Near-infrared, and Far-infrared/Terahertz Spectroscopy

Yukihiro Ozaki,Yukihiro OZAKI

DOI: https://doi.org/10.2116/analsci.20r008

IF: 1.967

2021-09-10

Analytical Sciences

Abstract:This article aims to overview infrared (IR) spectroscopy. Simultaneously, it outlines mid-infrared (MIR), near-infrared (NIR), and far-infrared (FIR) or terahertz (THz) spectroscopy separately, and compares them in terms of principles, characteristics, advantages, and applications. MIR spectroscopy is the central spectroscopic technique in the IR region, and is mainly concerned with the fundamentals of molecular vibrations. NIR spectroscopy incorporates both electronic and vibrational spectroscopy; however, in this review, I have chiefly discussed vibrational NIR spectroscopy, where bands due to overtones and combination modes appear. FIR or THz spectroscopy contains both vibrational and rotational spectroscopy. However, only vibrational FIR or THz spectroscopy has been discussed in this review. These three spectroscopy cover wide areas in their applications, making it rather difficult to describe these various topics simultaneously. Hence, I have selected three key topics: hydrogen bond studies, applications of quantum chemical calculations, and imaging. The perspective of the three spectroscopy has been discussed in the last section.

chemistry, analytical
Application of Near Infrared Analytical Technique in Identification and Content Determination of Traditional Chinese Medicine

Z. Ha

Abstract:Near infrared spectroscopy in the application of traditional Chinese medicine( TCM)research and production develops rapidly although started a little bit late. In recent years,the quality problem of TCM has been controversial,and TCM market is in quite a chaos. It is an effective way to take an analysis technique to identify the false and inferior Chinese medicinal materials to control the quality to improve the present situation of TCM market,and to ensure the safety of people's drug usage. As a new analysis technique,near infrared spectroscopy in the application of identification and content determination of TCM becomes more and extensive. It is a highly effective,convenient and nondestructive and environment-friendly method to perform qualitative analysis and determine the content of TCM by using NIRS. It is of great significance and value to use NIR in the qualitative identification and quantitative detection of Chinese medicine. However, the effective information extraction rate by near infrared spectrum is low,and it is relatively difficult to identify the weak signal with relatively low sensitivity,which is not suitable for trace analysis. It needs to improve in the future. In this article,the research progresses in recent years on the application of near infrared spectral analysis technology in the identification of authenticity,adulteration,production area,and variety of TCMs,and content determination were reviewed.

Medicine,Chemistry
Recent quantitative research of near infrared spectroscopy in traditional Chinese medicine analysis

Yang Huang,Marie-jia Gou,Kun Jiang,Lijun Wang,Guo Yin,Jue Wang,Ping Wang,Jiasheng Tu,Tiejie Wang

DOI: https://doi.org/10.1080/05704928.2018.1490312

2018-11-18

Applied Spectroscopy Reviews

Abstract:Traditional Chinese medicines (TCMs) have been used in China to prevent and cure diseases for centuries. Due to the complexity of TCMs, fast and highly efficient techniques are required to develop their quality control. Near infrared spectroscopy (NIRS) has been widely applied in TCM analysis for both nonpolar and polar components. This review describes an overview of experimental conditions (spectra pretreatments and multivariate techniques) investigated in NIRS for TCM components that are related to individual compounds such as lipids, essential oils, phenolics, alkaloids, saponins and carbohydrates. Their potential in the separation of TCMs using relevant applications with a particular focus on quantitative analysis is also demonstrated.

spectroscopy,instruments & instrumentation
Application of Near-Infrared Spectroscopy in the Study of Protein and Polymers with Amide Group

Jiang Yan,Wu Peiyi

2008-01-01

Progress in chemistry

Abstract:Near-infrared spectroscopy is a widely-used nondestructive analytical tool, but the disadvantages of weak band intensities and greatly overlapped bands have limited its application. In this review, several methods to overcome the drawbacks of NIR spectroscopy, such as second-derivative spectrum, two-dimensional correlation spectroscopy and chemometrics, are introduced. The applications of NIR spectroscopy in the studies of the structures and contents of both proteins and polymers with amide groups are discussed. All these show that the methods help a lot of in the qualitative and quantitative analysis of near-infrared spectroscopy and broaden the potential application of NIR spectroscopy.

Consideration of Some Problems in Near Infrared Spectra Analysis

Application of Near Infrared Spectroscopy in Nondestructive Quality Inspection of Agricultural Products

The Applications of Near-infrared Reflectance Spectroscopy in Plant Breeding and Germplasm Research

A Study on the Use of Near-Infrared Spectroscopy for the Rapid Quantification of Major Compounds in Tanreqing Injection

Study on the Influence of Temperature on Near Infrared Spectra

A Review of Application of Near-infrared Spectroscopy in Food Detection and Quality Control

Factors Influencing Near Infrared Spectroscopy Analysis of Agro-Products: a Review

A local pre-processing method for near-infrared spectra, combined with spectral segmentation and standard normal variate transformation

Application Progress on Near Infrared Spectroscopy in Quality Control and Process Monitoring of Traditional Chinese Medicine

A Review of Data Analysis Techniques Used in Near-Infrared Spectroscopy

Design of an FT-NIR Spectrometer for Online Quality Analysis of Traditional Chinese Medicine Manufacturing Process

[Research Progress on Standardization Study of NIR Spectroscopy Based Method for Quality Control of Traditional Chinese Medicine].

[Study on fast quality control in extracting process of Paeonia lactiflora using near infrared spectroscopy].

Application of Near Infrared Spectra Technique for Non-destructive Measurement on Fields of Agriculture and Food

Application of Near Infrared Spectroscopy in Oil Quality Analysis

Near-Infrared-II Bioimaging for in Vivo Quantitative Analysis

Application of Near-infrared Spectroscopy in Food and Medicine Analysis

Infrared Spectroscopy—Mid-infrared, Near-infrared, and Far-infrared/Terahertz Spectroscopy

Application of Near Infrared Analytical Technique in Identification and Content Determination of Traditional Chinese Medicine

Recent quantitative research of near infrared spectroscopy in traditional Chinese medicine analysis

Application of Near-Infrared Spectroscopy in the Study of Protein and Polymers with Amide Group