Abstract:As the most commonly used method for industrial activated carbon preparation, physical activation is usually accompanied by significant loss of raw materials, especially when the pore structure of activated carbon is well developed. This not only reduces yields, but also increases costs. To enhance both yield and pore structure of activated carbon, we proposed a facile and scalable method called "fast pyrolysis-physical activation". After fast pyrolysis, although the initial pore volume of the semi-coke decreases, the rapid release of volatiles promotes the increase of mesopore and macropore volumes and the development of micron-scale cracks, which is beneficial for CO2 mass transfer and reduces diffusion resistance. Therefore, compared to slow pyrolysis, the activated carbon produced through this method has a higher pore volume (increased by 25.9 %-30.0 %) and a larger SBET (increased by 26.7 %-38.3 %), while the yield remains almost unchanged. Consequently, due to the increase in pore volume and high yield of the activated carbon, the CO2 adsorption capacity (25 degrees C, 1 bar) of ACB-K700 increases from 2.02 mmol/g to 2.37 mmol/g compared to ACB-M700, and the total CO2 adsorption capacity of activated carbon prepared from the same mass of raw coal (1 g) increases from 1.07 mmol to 1.16 mmol. Due to the pre-formed pores inside the semi-coke, the gas activator molecules are able to penetrate deep into the particles, which not only reduces the ineffective etching that occurs on the surface, but also promotes the development of pore structure. In conclusion, this study provides a new pore development model for physical activation, and also provides a new method to produce activated carbon rapidly and massively, while the pore structure is well developed.

New Technology of Lignite As Raw Material to Preparation Activated Carbon

Activated Carbon Production from Lignite in Supercritical Water

Preparation of porous carbon electrode materials from potassium hydroxide extract of lignite doped with nitrogen

Combined Effect of Pressure and Carbon Dioxide Activation on Porous Structure of Lignite Chars

Preparation of Activated Carbon from Co-Pyrolysis Activation of Fly Ash and Biomass

Extraction of Humic Acids from Lignite and Its Use as a Biochar Activator

A Novel Melt Infiltration Method Promoting Porosity Development of Low-Rank Coal Derived Activated Carbon As Supercapacitor Electrode Materials

Preparation of micro-porous monolithic activated carbon from anthracite coal using coal tar pitch as binder

Emerging Modification Technologies of Lignin‐based Activated Carbon toward Advanced Applications

Modifying Lignite-Derived Hard Carbon with Micron Carbon Tubes to Improve Sodium-Ion Storage

An analysis of the carbonization process and volatile-release characteristics of coal-based activated carbon

The Research Advance of Preparation Process and Surface Property of Coal Based Activated Carbon

Research on performance comparison of lignite-activated carbon and hypercoal-activated carbon

Efficient Production of Activated Carbon with Well-Developed Pore Structure Based on Fast Pyrolysis-Physical Activation

A green trace K2CO3 induced catalytic activation strategy for developing coal-converted activated carbon as advanced candidate for CO2 adsorption and supercapacitors

Activated coke preparation by physical activation of coal and biomass co-carbonized chars

One-Step Catalytic Activation Promoting Pore Development of Zhundong Coal-Based Activated Coke: A Compared Study with Conventional Carbonization–Activation Combined Process

Preparation of Lignin-Based Carbon Materials and Its Application as a Sorbent

Study on the Influence of Pre-Oxidation Treatment on Surface Wettability and Supercapacitive Performance of Coal-Based Activated Carbon

Preparation and NH4+ Adsorption Performance of Ultrafine Lignite-Based Porous Materials

Activated Carbon and Graphite Facilitate the Upgrading of Indonesian Lignite with Microwave Irradiation for Slurryability Improvement