Study on Determination of Intrinsic Viscosity by Melt Flow Time

Hong Wang

2002-01-01

Abstract:A new analytic method of intrinsic viscosity was developed. In this method, we use melt flow time to calculate intrinsic viscosity. It is more quickly and less cost than classic intrinsic viscosity analytic method and it is no harm to environment.

What problem does this paper attempt to address?

A Novel Investigation of a Micropolar Fluid Characterized by Nonlinear Constitutive Diffusion Model in Boundary Layer Flow and Heat Transfer.

Jize Sui,Peng Zhao,Zhengdong Cheng,Liancun Zheng,Xinxin Zhang

DOI: https://doi.org/10.1063/1.4976642

IF: 4.6

2017-01-01

Physics of Fluids

Abstract:The rheological and heat-conduction constitutive models of micropolar fluids (MFs), which are important non-Newtonian fluids, have been, until now, characterized by simple linear expressions, and as a consequence, the non-Newtonian performance of such fluids could not be effectively captured. Here, we establish the novel nonlinear constitutive models of a micropolar fluid and apply them to boundary layer flow and heat transfer problems. The nonlinear power law function of angular velocity is represented in the new models by employing generalized “n-diffusion theory,” which has successfully described the characteristics of non-Newtonian fluids, such as shear-thinning and shear-thickening fluids. These novel models may offer a new approach to the theoretical understanding of shear-thinning behavior and anomalous heat transfer caused by the collective micro-rotation effects in a MF with shear flow according to recent experiments. The nonlinear similarity equations with a power law form are derived and the approximate analytical solutions are obtained by the homotopy analysis method, which is in good agreement with the numerical solutions. The results indicate that non-Newtonian behaviors involving a MF depend substantially on the power exponent n and the modified material parameter K0 introduced by us. Furthermore, the relations of the engineering interest parameters, including local boundary layer thickness, local skin friction, and Nusselt number are found to be fitted by a quadratic polynomial to n with high precision, which enables the extraction of the rapid predictions from a complex nonlinear boundary-layer transport system.
Modified Expression for the Effective Viscosity in the Semi-Dilute Shear Flows of Fiber Suspension

Lingxin Zhang,Jianzhong Lin,Xing Shi

DOI: https://doi.org/10.1360/03ww0107

2004-01-01

Abstract:The available expressions for the effective viscosity can not provide good predictions compared with the experiment data measured in the semi-dilute shear flows of fiber suspension with small aspect ratio. The departure of the theoretical prediction from the measured data increases with the decrease of the fiber aspect ratio. Therefore, by experiment for the fiber with 20 μm diameter, a new expression for the effective viscosity in the semi-dilute shear flows of fiber suspension with small aspect ratio is proposed, the relationship between the shear viscosity of fiber suspensions and the fiber concentration is given. The results show that the effective viscosity is not a linear function of the fiber concentration.
A modified microscale viscosity model of polymer melts and experimental verification

Jiakun Zhang,Minjie Wang,Hongxia Li

DOI: https://doi.org/10.1002/app.56319

IF: 3

2024-09-25

Journal of Applied Polymer Science

Abstract:During the micro‐molding of polymer melts, ensuring the viscosity models' accuracy was essential. Existing models had neglected the temperature dependence of microscale factor, rendering them unsuitable for materials with varying temperature sensitivities. This research employed a twin‐bore capillary rheometer and dies of distinct characteristic dimensions as the experimental setup to investigate the viscosity variations across four materials exhibiting diverse temperature sensitivities. A modified MCA viscosity model was established by integrating a microscale factor that accounted for both dimension and temperature dependence into the macroscopic Carreau viscosity model. The traditional MCAc model, which ignored the microscale factor's temperature dependence, offered a comparative reference. These models were subsequently applied to evaluate the influence of coupling effects between viscosity and viscous dissipation on melt temperature, with results compared to experimental data. The results indicated that the MCA model's viscosity forecasts were in closer accord with experimental measurements, maintaining an accuracy within a 16% margin. The models' application to temperature calculations under varying inlet velocities and temperatures confirmed that the MCA model's predictions of the temperature increase along the flow direction were more congruent with experimental outcomes, underscoring the critical importance of incorporating both dimension and temperature dependence when establish microscale viscosity models.

polymer science
Temperature dependence of polymer melt viscosity obtained based on DSC data and the consistency between thermodynamic and kinetic fragility

Chenghui Fang,Huanhuan Chen,Juan Zhou,Liping Chen,Zichao Guo,Wanghua Chen

DOI: https://doi.org/10.1002/app.55476

IF: 3

2024-03-23

Journal of Applied Polymer Science

Abstract:Temperature dependence of polymer melt viscosity obtained by DSC. The viscosity of the polymer melt has an impact on both the processing and properties of the product. However, conventional viscosity measurement methods have limitations such as strict testing conditions, large sample sizes, and long response times. This paper proposes a simplified method that utilizes differential scanning calorimetry to determine the viscosity–temperature relationship of the polymer melt. The research subjects consist of four noncrystalline polymers and five crystalline polymers. A new thermodynamic fragility formula of crystalline polymer is obtained. Additionally, high‐temperature limiting viscosity shows a good linear relationship with fragility. Compared with the traditional viscosity measurement, this method is a simpler and more effective way to model the viscosity of polymer melt and has broad prospects in application.

polymer science
In situ flow state characterization of molten resin at the inner mold in injection molding

Nanyang Zhao,Junfeng Liu,Mingcheng Bi,Zhongbin Xu,Jing Zhou,Jisong Ding,Qiong Wu

DOI: https://doi.org/10.1002/app.55018

IF: 3

2023-12-09

Journal of Applied Polymer Science

Abstract:Abstract Online viscosity information on processing lines can reflect the material flow resistance and offer valuable guidance for manufacturing across various industries. Considering the accuracy, devices, and processes involved in injection molding, characterizing the melt's flow state during material processing poses a significant challenge. To reduce investment in viscometers, avoid influencing the components' surface aesthetics due to the installation of sensors, and make the flow state detect online in mold, this study designs a rheometric mold with cylindrical runners for identifying the in situ viscosity of molten resin during injection molding. The detection conditions of injection speed and cavity pressure variations, the entrance effect, and the viscous dissipation for Polycarbonate are analyzed under various conditions. The in situ viscosity is identified and compared with the standard cross‐WLF model. The result shows that the melt velocity and cavity pressure variations during the filling process create a stable environment for in situ rheological characterization and the detected viscosity is related to the shear rate, melt temperature, and channel dimension in injection molding. The designed mold with cylindrical runners for determining the in situ thermal‐rheological behavior of polymer is distinguished successfully and exhibits prospects for the development of low‐cost, nondestructive, and inner‐mold measurement in manufacturing applications.

polymer science
Numerical Simulation of Rheological Behavior in Melting Metal Using Finite Volume Particle Method

Liancheng Guo,Yoshio Kawano,Shuai Zhang,Takahito Suzuki,Koji Morita,Kenji Fukuda

DOI: https://doi.org/10.3327/jnst.47.1011

IF: 1.126

2010-01-01

Journal of Nuclear Science and Technology

Abstract:In multiphase flow analyses, rheological behavior has a significant influence on not only the heat and mass transfer but also the dynamics of the solid and fluid during melting and solidification. Based on previous work, it is possible to consider rheological behavior by estimating the viscosity of the liquid phase with its compositional development. The present study investigates this rheological behavior through simulations of multiphase heat transfer problems using the moving finite volume particle (FVP) method, by introducing a viscosity model that takes into account viscosity changes due to phase changes. To validate the applicability of this viscosity model, a series of melting experiments using Wood's metal are conducted, and the observed melting characteristics form the basis for computer simulations and 3D numerical analysis using the FVP method. Good agreement between simulation and experiment indicates that the proposed viscosity model reproduces well the rheological behavior during melting.
A novel method for determining the viscosity of polymer solution

Haiyang Yang,Hao Li,Pingping Zhu,Yunfei Yan,Qingren Zhu,Fan Chenggao

DOI: https://doi.org/10.1016/j.polymertesting.2004.05.005

IF: 5.1

2004-01-01

Polymer Testing

Abstract:The relative viscosity ηr and, thus, the reduced viscosity ηsp/C of polymer solution could be obtained by recording the flow times of the polymer solution and the pure solvent in a capillary viscometer. Our experimental results indicated that the measurement of the flow time of the pure solvent was unnecessary. In particular, if the recorded flow time of the pure solvent was used to determine the viscosity of polymer solution, the reduced viscosity ηsp/C exhibited either a drastic increase or a significant decrease in an extremely dilute solution, depending upon the properties of the polymer solution investigated. In this research work, a new method for determining the viscosity of polymer solutions is reported. In the proposed method, the flow time of polymer solution at zero concentration, t0∗, instead of the measured flow time of the pure solvent, was used to determine the viscosity of polymer solution. The reduced viscosity ηsp/C determined by the new method is proportional to concentration C even in an extremely dilute solution. The relative viscosity ηr vs. C plot also indicated clearly that t0∗, instead of the measured flow time of the pure solvent, should be used for determining the viscosity of polymer solution. At low concentrations, the flow time of the polymer solution was proportional to C. As a result, t0∗ could be determined by extrapolating the flow time of the polymer solution to C=0.
THEORETIC SIMULATION ON INTRINSIC VISCOSITY OF DENDRIMERS

M Xu,XH Yan,RS Cheng,XH Yu

DOI: https://doi.org/10.3321/j.issn:1000-3304.2003.02.007

2003-01-01

Acta Polymerica Sinica

Abstract:By using the viscosity theory of Einstein and the molecular parameters of dendrimers, the relationship between the intrinsic viscosity [eta] and the generation number of dendrimers was obtained at the first time. The unique intrinsic viscosity behavior of dendrimers was explained. Thus, it becomes possible that the intrinsic viscosity of dendrimers can be forecasted theoretically.
A NEW MODEL TO PREDICT THE VISCOSITY OF MULTI-COMPONENT METALLIC MELTS

XD Wang,H Bao,WC Li

DOI: https://doi.org/10.3321/j.issn:0412-1961.2001.01.011

IF: 1.797

2001-01-01

ACTA METALLURGICA SINICA

Abstract:A new mathematical model for viscosity prediction of multi-component melts was presented by using the general geometric thermodynamic model. The equations for viscosity estimation have been deduced. The model was testified by the viscosity data of Cu-Ag-Au system. The predicted values are consistent with the experimental data well. The viscosities of Cu-Al-Au, Cu-Al-Sn, Cu-Au-Ni, Cu-Fe-Ni, Cu-Al-Mg and Cu-Ag-Sn systems have been predicted by this new model.
Simplified Determination of Long-Term Viscoelastic Behavior of Amorphous Resin

Hongneng Cai,Masuyuki Nakada,Yasushi Miyano

DOI: https://doi.org/10.1007/s11043-012-9174-0

2012-01-01

Abstract:The time-temperature superposition principle has been applied to predict accurately the long-term viscoelastic behavior of amorphous resin at a temperature below the glass transition temperature from measuring the short-term viscoelastic behavior at elevated temperatures. A simplified method for the determination of the long-term viscoelastic behavior of amorphous resin using dynamic mechanical analysis is proposed. The automatic horizontal and vertical shifting method is used to construct the smooth storage modulus master curve, and then the accurate time-temperature shift factors can be obtained. The validity of our simplified determination method is confirmed experimentally.
Experimental Study on Factors Influencing Viscosity of Nanofluids

WANG Hui,LUO Zhong-yang,CAI Jie-cong,WANG Tao,ZHAO Jia-fei,NI Ming-jiang

DOI: https://doi.org/10.3785/j.issn.1008-973x.2010.06.017

2011-01-01

Abstract:Taking the nanofluids as an object of study,which are respectively prepared with SiO2 nanoparticles suspended in deionized water,ethylene glycol(EG) and the mixture of above two matters,factors influencing viscosity of the nanofluids were analyzed,such as the particle size,temperature,base fluid composition and the volumetric fraction of nanoparticles etc.Results show that in the same base fluid,the viscosity increases with reducing particle size;the higher the volumetric fraction of EG in the base fluid,the more obvious the effect of temperature on the viscosity;the law governing variation of viscosity with volumetric fraction of nanoparticles agrees well with the modified Krieger Dougherty formula.However,if the concentration of nanoparticles is higher than 1%,the viscosity of nanofluids using mixed base fluid(50% volumetric fraction of EG) will be much higher than the predictive value,due to different aggregation degrees of nanoparticles.
Dimensional Analysis Theory and Molecular Dynamics Simulation of Polypropylene Melt Flow during Injection Molding Process

Jinrong Zhang,Dadong Yan,Li Peng,Xianbo Huang

2024-01-31

Abstract:Flow marks are common surface defects that occur in injection-molded products. Their formation may be related to the flow process of the melt in the mold. Through dimensional analysis, we have discovered that the geometric shape of the flow field is controlled by specific dimensionless quantities. These quantities can be summarized as follows: geometric dimensionless quantities related to the shape of the mold, material dimensionless quantities related to the melt and mold materials, and physical dimensionless quantities related to the flow. When the geometric shape of the mold changes proportionally, with the melt and mold material fixed, and the initial temperature of the melt and mold fixed, the geometric shape of the flow field will be solely controlled by the Weissenberg number Wi. If Wi is kept constant, changing the injection speed, changing the relaxation time of the polypropylene melt, or scaling the mold will result in similar geometric shapes of the flow field. If the size of the mold is not changed, the geometric shape of the flow field will be the same. Since the dimensionless equation represents a similar system of all sizes, we verified the above conclusion through molecular dynamics simulations at a smaller scale. After further improvement of the micro simulation system, there is a possibility of visualizing the formation process of flow marks. This would greatly aid in the advancement of theory and the elimination of flow marks in production and experiments. This work also illustrates that the methodology of dimensional analysis plus molecular dynamics simulation may be applied to a wider range of other systems, scaling down large systems and thus significantly reducing their computational effort.

Soft Condensed Matter,Chemical Physics
Comparative analysis of flow factors and crystallinity in conventional extrusion and gas-assisted extrusion

Xuemei Huang,Hesheng Liu,Xingyuan Huang,Yibin Huang,Zhong Yu

DOI: https://doi.org/10.1515/epoly-2023-0076

2024-03-22

e-Polymers

Abstract:Two-dimensional models of die-melt and die-gas-melt were created using Polyflow software. The radial and axial directions flow rate, shear rate, pressure, and first normal stress of the specimen were numerically simulated under conventional extrusion and gas-assisted extrusion while taking into consideration the heat transfer on the free surface of the specimen. The crystallinity was determined by combining the simulation data with the crystallization kinetics equation. The computation results are then examined using Origin software. The findings demonstrate that the use of gas-assisted extrusion technology can cause the V x to decrease or even turn negative by reducing the friction between the melting edge and the die wall. Additionally, it makes V y , pressure, shear rate, temperature, first normal stress, and crystallinity increasingly steady and aids in reducing or avoiding the Barus effect. The crystallization phenomena can be measured by using the crystallization kinetics equation. The study of extruded parts at the microscopic level will benefit from this application.

polymer science
RHEOLOGICAL PROPERTIES OF POLY(VINYLIDENE FLUORIDE) MELT

Qiang Zheng

2006-01-01

Abstract:Rheological behavior at a wide range of shear rates(10~(-2) s~(-1)~ 5×10~3 s~(-1)) for Poly(vinylidene fluoride)(PVDF) melt was investigated by means of high pressure capillary rheometer and advanced rheological extension system(ARES).At very low shear rates,PVDF melt was Newtonian fluid,the melting viscosity of which was almost independent of shear rates.However,it was non-Newtonian fluid at higher shear rates,and its melting viscosity decreased with the increase of shear rates.Several factors,such as molecular weights,temperature and shear rates,on apparent viscosity,non-Newtonian exponent and flow activation energy of PVDF melt were also discussed.The results show that increasing temperature and decreasing molecular weights or shear rates can cause an increase of non-Newtonian exponent of PVDF melt.Flow activation energy of PVDF melt which accorded with the sensitivity of apparent viscosity on temperature increases with decrease of shear rates.At low shear rates,apparent viscosity of PVDF melt can be effectively decreased by increasing temperature.
Neural Networks-based Fitting of Viscosity of Plastics Melt

Wu Mengwu,Zhou Huamin,Zhao Peng,Li Dequn

DOI: https://doi.org/10.3969/j.issn.1005-3360.2007.02.009

2007-01-01

Abstract:It introduced the significance and of the viscosity of plastics melt in injection molding CAE software,as well as its experiment methods.In view of the shortcomings of the fitting method of traditional empirical formula,it employed the BP neural network to fit the quantitative relationships between the viscosity and temperature and shear rate,and compared the fitting result with that of traditional formula method.It demonstrated the feasibility and superiority of neural networks-based fitting method.
Study on the Melt Rheological Characterization of Micro-Tube Gas-Assisted Extrusion Based on the Cross-Scale Viscoelastic Model

Xiaohui Zhang,Xingyuan Huang,Bin Liu,Shuiquan Chen

DOI: https://doi.org/10.3390/polym16070973

IF: 5

2024-04-04

Polymers

Abstract:In the micro-tube gas-assisted extrusion process, flow theories ignoring cross-scale viscoelastic variations fail to effectively characterize the rheological state of the melt. To investigate the impact of cross-scale viscoelastic variation on the quality of the micro-tube gas-assisted extrusion, a 3D multiphase flow extrusion model incorporating a double gas-assisted layer was developed. Subsequently, we modified the DCPP constitutive equations based on the cross-scale factor model. Both the traditional and gas-assisted extrusions were simulated under macroscale and cross-scale models using the Ansys Polyflow. Finally, using the established gas-assisted extrusion platform, extrusion experiments were conducted. The results indicate that, owing to the reduced melt viscosity under the cross-scale model, the deformation behavior of the melt is more pronounced than in the macroscale model. The cross-scale model's numerical results more closely match the experimental outcomes under the same parameters, thereby confirming the feasibility of the theoretical analysis and numerical simulation. Moreover, the predictive capability of the cross-scale model for the micro-tube gas-assisted extrusion is further validated through numerical and experimental analyses with varying parameters. It is demonstrated that the cross-scale viscoelastic variation is a critical factor that cannot be overlooked in the gas-assisted extrusion.

polymer science
A hybrid molecular dynamics study on the non-Newtonian rheological behaviors of shear thickening fluid

Kaihui Chen,Yu Wang,Shouhu Xuan,Xinglong Gong

DOI: https://doi.org/10.1016/j.jcis.2017.03.038

IF: 9.9

2017-01-01

Journal of Colloid and Interface Science

Abstract:To investigate the microstructural evolution dependency on the apparent viscosity in shear-thickening fluids (STFs), a hybrid mesoscale model combined with stochastic rotation dynamics (SRD) and molecular dynamics (MD) is used. Muller-Plathe reverse perturbation method is adopted to analyze the viscosities of STFs in a two-dimensional model. The characteristic of microstructural evolution of the colloidal suspensions under different shear rate is studied. The effect of diameter of colloidal particles and the phase volume fraction on the shear thickening behavior is investigated. Under low shear rate, the two-atom structure is formed, because of the strong particle attractions in adjacent layers. At higher shear rate, the synergetic pair structure extends to layered structure along flow direction because of the increasing hydrodynamics action. As the shear rate rises continuously, the layered structure rotates and collides with other particles, then turned to be individual particles under extension or curve string structure under compression. Finally, at the highest shear rate, the strings curve more severely and get into two-dimensional cluster. The apparent viscosity of the system changes from shear-thinning behavior to the shear-thickening behavior. This work presents valuable information for further understanding the shear thickening mechanism.
Time-dependent Viscoelastic Behavior of an LDPE Melt

Shuxin Huang,Chuanjing Lu,Yurun Fan

DOI: https://doi.org/10.1007/s10409-006-0006-9

IF: 3.5

2006-01-01

Acta Mechanica Sinica

Abstract:Two differential constitutive equations, i.e. Giesekus model and Johnson–Segalman model were employed here to predict the time-dependent viscoelastic behavior of an LDPE melt in thixotropy-loop experiments and step shear rate experiment. Multiple relaxation modes were adopted, and the parameters used to describe the nonlinear viscoelasticity in the two models were obtained by fitting the shear-thinning viscosity. The predictions on those transient shear characteristics by the two models are found in qualitative agreement with our previous experiments. Johnson– Segalman model predicts oscillation behavior in the thixotropy-loop and step shear rate experiments, whereas Giesekus model does not. Both models predict higher shear stresses than the experimental data in the case of long time shearing, implying that both models are not able to completely characterize the time-dependent shear stress of the melt at high shear rate.
Shear Time Dependent Viscosity of Polystyrene-Ethylacrylate Based Shear Thickening Fluid

Qian Chen,Shouhu Xuan,Wanquan Jiang,Saisai Cao,Xinglong Gong

DOI: https://doi.org/10.1088/0964-1726/25/4/045005

IF: 4.1

2016-01-01

Smart Materials and Structures

Abstract:In this study, the influence of the shear rate and shear time on the transient viscosity of polystyrene-ethylacrylate. based shear thickening fluid (STF) is investigated. If the shear rate is stepwise changed, it is found that both the viscosity and critical shear rate are affected by the shear time. Above the critical shear rate, the viscosity of the STF with larger power law exponent (n) increases faster. However, the viscosity tends to decrease when the shear time is long enough. This phenomenon can be responsible for the reversible structure buildup and the breakdown process. An effective volume fraction (EVF) mechanism is proposed to analyze the shear time dependent viscosity and it is found that viscosity changes in proportion to EVF. To further clarify the structure evolution, a structural kinetic model is studied because the structural kinetic parameter (lambda) could describe the variation in the effective volume fraction. The theoretical results of the structural kinetic model agree well with the experimental results. With this model, the change in viscosity and EVF can be speculated from the variation of lambda and then the structure evolution can be better illustrated.
Studies on the viscosity behavior of polymer solutions at low concentrations

Haiyang Yang,Yunfei Yan,Pingping Zhu,Hao Li,Qingren Zhu,Chenggao Fan

DOI: https://doi.org/10.1016/j.eurpolymj.2004.10.002

IF: 6

2005-01-01

European Polymer Journal

Abstract:Viscosity measurements had been made on poly(vinyl alcohol) (PVA), poly(N-vinyl-2-pyrrolidone) (PVP) and poly(ethylene oxide) (PEO) solutions down to low concentrations. It was found that t0∗ defined as the flow time of the pure solvent in ideal conditions and obtained practically by extrapolating the flow time of polymer solution t to zero concentration, was not equal to the flow time of the pure solvent t0 measured. The reduced viscosity ηsp/C determined by (t/t0-1)/C exhibited either a drastic increase or a significant decrease with dilution, depending upon the polymer solution investigated. On the other hand, ηsp/C determined by (t/t0∗-1)/C was proportional to C even at low concentrations. The anomalous viscosity behavior of neutral polymer solutions at low concentrations, therefore, was due to the incorrect method by which ηsp/C was determined. The detailed experiments indicated that the effective diameter of the viscometer capillary, the surface property of the capillary wall and the additional pressure corresponding to the measurement of t and t0 for PVA, PVP and PEO solutions were not the same. Taking into account the contact anger and the surface tension of the liquid, together with the geometric parameter of the viscometer, the influence of the additional pressure upon the flow time measurement could be studied quantitatively. The calculation was in a good agreement with the experimental result. According to the method presented in this paper, the thickness of the adsorbed polymer layers on the capillary walls could be determined. It was noted that the thickness of the adsorbed polymer layers on the capillary walls was closely related to the solvent in which the polymer molecules were dissolved. The polymer molecular weight, however, had little or no effect on the thickness of the adsorbed polymer layers on the walls of the viscometer capillary.

Study on Determination of Intrinsic Viscosity by Melt Flow Time

A Novel Investigation of a Micropolar Fluid Characterized by Nonlinear Constitutive Diffusion Model in Boundary Layer Flow and Heat Transfer.

Modified Expression for the Effective Viscosity in the Semi-Dilute Shear Flows of Fiber Suspension

A modified microscale viscosity model of polymer melts and experimental verification

Temperature dependence of polymer melt viscosity obtained based on DSC data and the consistency between thermodynamic and kinetic fragility

In situ flow state characterization of molten resin at the inner mold in injection molding

Numerical Simulation of Rheological Behavior in Melting Metal Using Finite Volume Particle Method

A novel method for determining the viscosity of polymer solution

THEORETIC SIMULATION ON INTRINSIC VISCOSITY OF DENDRIMERS

A NEW MODEL TO PREDICT THE VISCOSITY OF MULTI-COMPONENT METALLIC MELTS

Simplified Determination of Long-Term Viscoelastic Behavior of Amorphous Resin

Experimental Study on Factors Influencing Viscosity of Nanofluids

Dimensional Analysis Theory and Molecular Dynamics Simulation of Polypropylene Melt Flow during Injection Molding Process

Comparative analysis of flow factors and crystallinity in conventional extrusion and gas-assisted extrusion

RHEOLOGICAL PROPERTIES OF POLY(VINYLIDENE FLUORIDE) MELT

Neural Networks-based Fitting of Viscosity of Plastics Melt

Study on the Melt Rheological Characterization of Micro-Tube Gas-Assisted Extrusion Based on the Cross-Scale Viscoelastic Model

A hybrid molecular dynamics study on the non-Newtonian rheological behaviors of shear thickening fluid

Time-dependent Viscoelastic Behavior of an LDPE Melt

Shear Time Dependent Viscosity of Polystyrene-Ethylacrylate Based Shear Thickening Fluid

Studies on the viscosity behavior of polymer solutions at low concentrations