Abstract:In view of reactor shielding calculations with complicated geometry structure, traditional manual modeling of discrete ordinate program is a very cumbersome, inefficient, and error prone. CAD visualization modeling of complicated shielding geometry is implemented based on the open source platform for numerical simulation (SALOME). The discrete ordinate program often requires millions or tens of millions discrete meshes to build a neutronics physics model for a three-dimensional complexity model, each discrete mesh needs to be assigned material. Currently, center point material mapping method is commonly used to assign the mesh material, which assign the material at the center point of the mesh to the mesh material. For the complicated geometry, the discrete meshes typically have multiple materials, which introduces modeling errors. Linear volume-weighted homogenization method is proposed to obtain the uniform mix material of the mesh containing two or more materials. Automatic modeling of discrete ordinate program (AMDOP) is developed based on the linear volume-weighted homogenization method d, which can achieve precise automatic conversion of CAD models to 3D neutronics physics shielding calculation model for the discrete ordinate program. The AMDOP is verified based on a cylindrical model and Kobayashi model, the calculation results of automatic modeling are completely consistent with those of manual modeling, and the linear volume-weighted homogenization method can effectively improve calculation accuracy for model with multiple materials in the discrete meshes. To further verify the reliability and practicality of AMDOP, the practical engineering shielding calculation benchmark problem (NUREG-CR-6115) is modeled and calculated, the results calculated by the linear volume-weighted homogenization method are in good agreement with the reference results, this indicates that the AMDOP automatic modeling process is correct and reliable.

Research on Conversion of 3D CAD Model into Monte Carlo Models Based on SALOME

Development of an Assistant Program for CAD-to-cosRMC Modelling

CAD-based modeling for 3D particle transport

Development of CAD geometry converting and correction method in Monte Carlo code RMC

CMGC: a CAD to Monte Carlo Geometry Conversion Code

Development of Cosvmpt and Application of Creating 3D Neutronics Model for 360-Degree CFETR

ICONE15-10526 AUTOMATIC CONVERSION OF CAD MODEL INTO NEUTRONICS MODEL

Development of an MCNP assisted modelling software based on OpenCasCade

Development and Application of MC-SN Coupled Auto-Modeling Tool RCAM1.0

Preliminary study on CAD-based method of characteristics for neutron transport calculation

Research on approaches to automatic modeling of discrete ordinate programs based on CAD model

Interactive visualization of MCNP-based neutronics models

Use of MCAM in creating 3D neutronics model for ITER building

Study on application of DAG-OpenMC in fusion neutronics analysis

Enhancing Monte Carlo Workflows for Nuclear Reactor Analysis with Metamodel-Driven Modeling

GEOUNED: A new conversion tool from CAD to Monte Carlo geometry

An Algorithm of Converting UG Model to MCNP Geometry Model

Research On Converting Cad Model To Mcnp Model Based On Step File

Monte Carlo Workflow Unification for Nuclear Reactor Analysis with Metamodel-Driven Modeling

Bidirectional conversion between CAD model and TRIPOLI model: An extending function of MCAM

Implementation and Verification of the DAGMC Module in Monte Carlo Code RMC