Abstract:In response to the call for environment protection, more and more researches have been finding new alternative refrigerants which are of zero Ozone depleting potential (ODP), low global warming potential (GWP) and will be efficient, inflammable, and nontoxic to replace the HCFCs and HFCs refrigerants. Non-azeotropic mixtures of suitable fluids are becoming the important candidates of that search race. In this paper, the flow and heat transfer performance of CO2-DME (dimethyl ether) mixture refrigerants at 8.0 MPa in a horizontal tube was numerically investigated. In particular, this work has been focused upon the laminar heat transfer characteristics of CO2-DME mixture refrigerant flow with Reynolds number ranging from 180 to 1800 and the mass fraction of DME ranging from 21% to 39%. The results show that the heat transfer performance of the mixture fluid can be improved when the mass fraction of DME increases to 30%. Considering both the best heat transfer performance and the safety, the optimum component of CO2-DME (70/30, mass%) has been found in this study. And the mechanisms that are responsible for the heat transfer enhancement are obtained and they are: (1) The temperature gradient of CO2-DME mixture fluid with high mass fraction of DME is larger than that of CO2-DME mixture fluid with low mass fraction of DME; in addition, the temperature gradient increases with the mass fraction of DME; (2) The increase of thermal conductivity for CO2-DME mixtures can enhance the heat transfer performance to a large extent. (3) The self-acceleration characteristic of the supercritical mixture fluid is also beneficial to the heat transfer enhancement. Furthermore, it is found that the heat transfer performance of the mixture fluid can also be improved with Reynolds number. The viscous boundary layer of the fluid becomes thinner when the Reynolds number increases, which leads to an enhancement in heat transfer. In addition, at high Reynolds number, the flow is tend to be turbulent, which is beneficial to the heat transfer performance of mixture fluid. With regard to the flow characteristic of mixtures, first the flowing changes depend on the temperature and the density of fluid to a large extent-the high value of velocity can occur when the fluid has a high temperature and a low density. And secondly, the supercritical CO2-DME mixtures speed up along the tube and make themselves different with water flow. These results of this study have significant implications for the design of high-performance heat exchangers, using CO2-DME mixture as the working fluid.

Molecular Dynamics Simulation of Interfacial Heat Transfer Characteristics of CO2, R32 and CO2/R32 Binary Zeotropic Mixture on a Smooth Substrate

Molecular Dynamics Simulations of R32/R1234yf Nanoscale Boiling on a Smooth Substrate

Molecular Dynamics Simulation on Bubble Nucleation and Boiling Heat Transfer of R1336mzz(Z) Nanofilm with Varying Boundary Heating Rates

Molecular Dynamics Simulations on Evaporation of a Suspended Binary Mixture Nanodroplet

Molecular dynamics simulations of R32/R134a boiling on nanostructured surfaces

Interfacial Effects on Nucleate Boiling Heat Transfer of Binary Mixtures

Molecular Dynamics Simulation of Interfacial Heat Transfer Behavior During the Boiling of Low-Boiling-point Organic Fluid

Nanofilm Boiling and Evaporation of Working Fluids R32/R1234ze(E) on Metal Walls: Insights from Molecular Dynamics Simulations

Heat transfer enhancement for flow boiling of zeotropic mixtures with regulating liquid mass transfer resistance

Thermodynamic and Mass Transport Properties of R1234ze(E) and R32 Mixtures at the Liquid-Vapor Interface: A Molecular Dynamics Study

Microscopic insights on liquid–vapor phase change phenomena of R1336mzz(Z) nanofilm through molecular dynamics simulations

Interfacial properties of binary azeotropic mixtures of simple fluids: Molecular dynamics simulation and density gradient theory.

Flow Boiling Heat Transfer Characteristics of Zeotropic Mixture Co2/R152a with Large Temperature Glide in a 2 Mm Horizontal Tube

The Effect of Liquid–Solid Interactions Upon Nucleate Boiling on Rough Surfaces: Insights from Molecular Dynamics

Boiling Heat Transfer of CO2/lubricant on Structured Surfaces Using Molecular Dynamics Simulations

MOLECULAR DYNAMICS STUDY ON THE DYNAMIC BEHABIORS AND THERMO- DYNAMIC PROPERTIES OF THE LIQUID-VAPOR INTERFACE

Numerical Simulation of Single Bubble Growth and Heat Transfer of R32+R1234yf Binary Mixtures During Saturated Pool Boiling

Molecular Dynamics Study On Interface Properties And Interphase Transport

Flow Pattern Transitions and Liquid Mass Transfer Resistance of Binary Zeotropic Mixtures During Flow Boiling

Interfacial Thermal Conductance and Thermal Accommodation Coefficient of Evaporating Thin Liquid Films: A Molecular Dynamics Study

A Numerical Study on Heat Transfer Characteristics of CO2-DME Mixture Fluid