Abstract:The overall aim of this work is to produce a parallel e-beam lithography system using an array of field-emitting microguns independently driven by an active matrix array. This paper will describe the work carried out on optimisation of suitable carbon-based materials for use as the electron emitter source in such a system. From initial experiments on field emission from tetrahedrally bonded amorphous carbon (ta-C) and nanocluster carbon films, it has been deduced that emission occurs from nanometre-size sp(2) sites within an insulating sp(3) matrix. Hence, we have carried out a series of experiments to investigate the possibility of deliberately producing such sp(2) regions within a predominantly sp(3) matrix using e-beam irradiation, high energy ion beam irradiation and post deposition plasma processing of ta-C. Unfortunately, although the use of I GeV uranium ions successfully produced arrays of sp(2) rich regions on the required nanometre scale, no preferential field emission from such sites could be obtained. The final series of experiments were thence carried out using aligned carbon nanotubes (CNTs) as the electron sources. Results on aligned CNTs, grown using a dc plasma technique and a Ni catalyst, are presented. Both the diameter and length of the CNTs are dependent upon the thickness of the catalytic layer used. Field emission from an array of CNTs was obtained.

Simulation Study of Annular Beam Electron Optical System Based on Carbon Nanotube Cold Cathode

Design And Simulation Of A Multi-Sheet Beam Terahertz Radiation Source Based On Carbon-Nanotube Cold Cathode

A High-Current-Density Terahertz Electron-Optical System Based on Carbon Nanotube Cold Cathode

Study of Pulsed Field Emission Characteristics and Simulation Models of Carbon Nanotube Cold Cathodes

Theoretical Research on A Multibeam-Modulated Electron Gun Based on Carbon Nanotube Cold Cathodes

A Gridded High-Compression-Ratio Carbon Nanotube Cold Cathode Electron Gun

Parametrically Optimized Carbon Nanotube-Coated Cold Cathode Spindt Arrays

Theoretical research on an 8mm traveling wave tube based on carbon nanotube cold cathode

Theoretical Research On 300ghz Carbon Nanotube Cold Cathode Gyrotron

A Fully-Sealed Carbon-Nanotube Cold-Cathode Terahertz Gyrotron

Carbon Nanotube Cathodes As Electron Sources for Microwave Amplifiers

Hot electron field emission via individually transistor-ballasted carbon nanotube arrays.

Highly stable carbon nanotube cathode for electron beam application

Simulation Study of Carbon Nanotube Cold Cathodes with Mesh Grid Structure

A Truncated-Cone Carbon Nanotube Cold-Cathode Electron Gun

Tailoring Beam Shape Using a Coplanar Quadrupole Focusing Structure in Carbon Nanotube Cold Cathode Electron Gun

Carbon Nanotubes As Field Emission Sources

Carbon films for use as the electron source in a parallel e-beam lithography system

A Pierce Electron Gun Based on Carbon Nanotube Cold Cathodes

Aligned Carbon Nanotubes/Fibers for Applications in Vacuum Microwave Amplifiers

A Cold Cathode Electron Gun Using Convex Carbon Nanotube Emitter