Abstract:For robotic polishing of curved surfaces with compliant polishing disc, it is critical to accurately control the tilt angle of the polishing disc and normal contact force between the disc and the workpiece surface simultaneously. As conventional industrial robots lack force control capability, a 3-DOF two-rotational-one-translational (2R1T) force-controlled end-effector based on the 3-PPS parallel mechanism is developed for robotic polishing. During the polishing process, the changes of the tilt angle of the end-effector's moving platform will result in displacement variations of the contact point, owing to the inherent parasitic motion of the end-effector module, the geometry of the disc, and the compliance of the disc. Without proper compensation of the displacement variation, the control accuracy of contact force will be significantly decreased. To tackle this problem, a parametric model is established to predict the contact point variation. A hybrid orientation/force control architecture with compensation of the contact point variation is proposed. Based on the kinematic analysis, orientation control is achieved through a position controller. The force tracking control considering the uncertainty of the environment is achieved through an admittance controller. By introducing the contact point compensation model into the control architecture, the control accuracy of the contact force is significantly improved. The proposed control architecture is evaluated on a macro-mini manipulator consisting of a 6-DOF industrial robot and the 2R1T force-controlled end-effector. The experimental results indicate that the orientation control is accurate and the mean force errors with three different kinds of tilt angle references are reduced by 78.9 , 81.1 and 72.3 compared to the conventional hybrid orientation/force control, respectively, which validate the effectiveness of the proposed control method.

Dimensional synthesis and static/dynamic analysis of a robot in automobile hubs polishing

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Rigid–flexible coupling dynamics analysis with joint clearance for a 5-DOF hybrid polishing robot

Elasto-dynamic performance evaluation of a 6-DOF hybrid polishing robot based on kinematic modeling and CAE technology

Kinematics Simulation of Adaptive Polishing Robot for Large Freeform Surface

Dimensional parameters and structural topology integrated design method of a planar 5R parallel machining robot

Robotic Polishing of Unknown-Model Workpieces With Constant Normal Contact Force Control

Optimization of the Polishing Efficiency and Torque by Using Taguchi Method and ANOVA in Robotic Polishing

Design and constant force control of a parallel polishing machine

Design of the parallel mechanism for a hybrid mobile robot in wind turbine blades polishing

Dimensional synthesis of a 5-DOF hybrid robot

Design of a spatial constant-force end-effector for polishing/deburring operations

Dynamic Modeling and Performance Evaluation of a 5-DOF Hybrid Robot for Composite Material Machining

Hybrid orientation/force control for robotic polishing with a 2R1T force-controlled end-effector

Dynamic Modeling and Design Parameter Optimization of a 5-DoF Parallel Machining Robot

Stability analysis of the MRT-based compliant polishing tool system

A Digital Design Framework for the Dimensional Optimization of Parallel Robots Based on Kinematic and Elasto-Dynamic Performance

Complete Kinematics/Dynamics Modeling and Performance Analysis of a Novel SCARA Parallel Manipulator Based on Screw Theory

An Investigation of Real-Time Robotic Polishing Motion Planning Using a Dynamical System

2PPaRR-2PPaRU: Design, analysis, and optimization of a new 3T1R parallel manipulator with rotational pitch motion

Dimension Synthesis of a Spatial Parallel Kinematic Manipulator Based on S-shaped Test Specimen