Abstract:Capacitor voltage balancing is a critical issue for neutral-point-clamped (NPC)-based converters, including the two-three (2/3)-level dual-active-bridge (DAB) DC-DC converters. The unbalanced capacitor voltage will increase the voltage stress on power devices and negatively affect the reliability of the converters. Two typical problems during the capacitor voltage balancing process should be solved, i.e., power fluctuation minimization and determination of the transformer current polarity. Accordingly, this paper proposes a balancing control scheme based on the complementary-switching-state (CSS) method. In the CSS method, the switching states which are identified to be adverse for balancing will be replaced by their corresponding CSSs to control the neutral-point current while keeping the voltage and current waveforms unchanged. By doing so, the power fluctuation and current overshoot during the balancing process can be significantly reduced. Moreover, since the dynamic voltage and current waveforms are identical to the steady-state waveforms, the transformer current polarity during the balancing process can be identified based on the steady-state power and current models. Therefore, the determination of the transformer current polarity can be simplified compared to the traditional balancing control scheme. Finally, experimental results are carried out to verify the performance of the proposed balancing control scheme.

A Two-Phase Hybrid Switched Capacitors Converter with Interleaving Control Scheme for Flying Capacitors Self-Balancing

Voltage and Current Balancing Control for 48-V Two-Stage Hybrid-Switched-Capacitor Converter

A Synchronous Rectified Flyback AC-DC Converter Using Capacitor-Coupled Isolated Communication

Capacitor Voltage Balancing for Multilevel Dual-Active-Bridge DC-DC Converters.

Flying-Capacitor Based Hybrid LLC Converters with Input Voltage Auto-Balance Ability for High Voltage Applications

A Four-level Hybrid-Clamped Converter with Natural Capacitor Voltage Balancing Ability

Self-Balanced Multilevel Inverter With Hybrid Double- and Half-Mode Switched Capacitor

Capacitor Voltage Balancing Algorithm with Redundant Level Modulation for a Five Level Converter with Reduced Device Count

Capacitor Voltage Balancing Control of A Flying Capacitor Based N-Level Dc-Dc Converter

Interleaved High Step-Up Converter with Coupled Inductor and Blocking Capacitor

A High-Efficiency 12/1-V Dual-Path Series-Capacitor Converter with Low $v\cdot A$ Metric and Full Duty Range

Two Stages FCS-MPC for a Flying Capacitor Converter With Improved Switching Performance

A Symmetrical Control Scheme for a Resonant Switched-Capacitor Converter with Inverted Output Voltage

Novel Control Scheme of Three-Phase Six-Level Hybrid Flying-Capacitor Inverters With Self-Balancing Capability

Capacitor Voltage Balancing Control for a Novel 5-Level Dual Active Bridge Converter

Capacitor Voltage Ripple Reduction of A 4-Level Hybrid Clamped Converter Using Switching State Redundancy for Medium-Voltage Drive

Voltage Jump Suppression and Capacitor Voltage Fluctuation Analysis for a Four-Level Hybrid Flying Capacitor T-Type Converter

Self-Balanced 13-Level Inverter Based on Switched Capacitor and Hybrid PWM Algorithm

Imbalance Mechanism and Balanced Control of Capacitor Voltage for a Hybrid Modular Multilevel Converter

A 24V-to-1v Triple Series-Capacitor Buck Converter with Low-volage Power Switches

Design and Analysis of an Interleaved Flyback–Forward Boost Converter with the Current Autobalance Characteristic