Abstract:A quad-polarization reconfigurable reflectarray (RA) antenna, which can work in horizontal polarization (HP), vertical polarization (VP), left-hand circular polarization (LHCP), and right-hand circular polarization (RHCP) modes with simultaneous large-angle beam-scanning capability, is designed and experimentally verified. Under the traditional view at the element level, at least 2-bit phases are required because a 90° phase shift step is needed for conversion from linear polarization (LP) to circular polarization (CP). In this work, we found that the extra phase shifts (90°/ $- 90^{\circ })$ can be achieved by changing the global reference phase of the 0/1 coding arrangement in the spatially fed architecture, while 1-bit phase resolution is used in the element level. As verification, a square patch with four slots loaded with two positive-intrinsic–negative (PIN) diodes is exploited as an RA element with 1-bit phase independent control of dual-LP. Then, the RA aperture contains 16 $\times16$ elements, where 512 PIN diodes are integrated to control each state independently by a field-programmable gate array (FPGA), excited by a linearly polarized horn is developed and fabricated. Besides, the superposition of the aperture field approach is used to optimize the CP radiation performance, especially the axial ratio (AR). The measured results of the prototype demonstrate the simultaneous multipolarization reconfigurable and the beam-steering capability, where scanning beams are up to 60° in horizontal and vertical planes. The proposed low-lost design is believed to be a promising candidate for mobile communication and cognitive radar applications.

A Wideband Low-Profile Reflectarray with Decoupled LHCP/RHCP Beams

A Wideband Low-Profile Reflectarray with Decoupled LHCP/RHCP Beams

One‐bit Wideband Reconfigurable Reflectarray with Stable Beam‐scanning Gain for X‐band Application

Anisotropic Impedance Surface-Enabled Low-Profile Broadband Dual- Circularly Polarized Multibeam Reflectarrays for Ka -Band Applications

Reconfigurable Design of a Polarization-Decoupled Dual-Circularly Polarized Reflectarray

Wideband Dual-Circularly-Polarized Reflect-Arrays Based on Dual-Functional-Layer Cells With Berry-Phase Compensation at X-Band

Low-Profile and Wideband Dual-Circularly Polarized Reflect-Arrays Based on Rotated Metal-Backed Dual-Polarized Aperture-Coupled Patch Elements

A Broadband Multi-Beam Dual-Circularly Polarized Reflect-Array for Ka-Band Application

Dual-Wideband Dual-Circularly-Polarized Shared-Aperture Reflectarrays with a Single Functional Substrate for K-/Ka-Band Applications

A Broadband Low-Profile Dual-circularly Polarized Reflect-Array Based on A Single-layer Microstrip Patch for Ka -Band Application

A Dual-Circularly Polarized Reconfigurable Reflectarray Antenna with Independent Beam Scanning Capability

Quad-Polarization Reconfigurable Reflectarray with Independent Beam-Scanning and Polarization Switching Capabilities

Compact Dual-Circularly Polarized Reflectarray Antenna Using Semicircle Strips Elements With Independent Focus and Beam Directions

Optically Transparent Circularly Polarized Reflectarray for Ka-Band Applications

A Wideband Multi-Bit Reflectarray Antenna with Low Cross-Polarization Based on Nonradiative Dielectric Waveguide

Low-Profile Wideband 1-Bit Reconfigurable Transmitarray with 2-D Beam-Scanning Capacity

A Reflectarray Antenna Designed with Gain Filtering and Low-RCS Properties

Broadband, Single-Layer Dual Circularly Polarized Reflectarrays With Linearly Polarized Feed

A Single-Layer Broadband Linear-to-Circular Polarization Reflectarray with 45° Offset Feed for Ka-band Communications

Linearly and circularly polarized reflectarray antennas with 4-arm archimedean spiral lattice

A Single-Layer High-Efficiency Wideband Reflectarray Using Hybrid Design Approach