Abstract:A novel type of a highly integrated low-loss stack-up is explored that leverages additive manufacturing for the integration of a 3D printed and metal-coated air-filled waveguide with a Printed Circuit Board (PCB) by sharing a common ground plane. A complementing microstrip to waveguide transition is proposed exploiting the flexibility of the 3D printing technology to realize an in-line E-field and smooth profile continuous impedance transformation to ensure low insertion losses, wideband operation, and high return loss. Field mode matching and monotonic impedance profile are ensured using various intermediate guides along with the transition. A fast design procedure relies on analytical expressions for guides‘ impedance that was proven not to require further full-wave model optimization. The concept was experimentally validated by the realization of demonstrators operating within the cm- and mm-wave frequency range and fabricated employing a subtractive PCB and additive vat photopolymerization 3D printing and copper plating technologies. A hybrid WR-90-sized waveguide with RMS metal coating roughness of $1.5 ~\mu \text{m}$ yields power loss below 0.026 dB/cm being comparable to an all-metal counterpart. Measured back-to-back half-wavelength long at lower cutoff transitions to either WR-90 or WR-28 hybrid waveguides operate with bandwidth of ~1.9 and ~1.4 (return loss better than 10 dB) with 0.63 dB and 0.86 dB average loss per transition within 8.2 – 12.6 GHz and 26.5 – 40 GHz bands, respectively.

A Lightweight and Low-Cost 3D Printed Waveguide for Medium Power Applications

3D Printed Waveguide Step-Twist with Bandpass Filtering Functionality

A 3-D Printed $E$ -Plane Waveguide Magic-T Using Air-Filled Coax-to-Waveguide Transitions

A Rasorber-Like Waveguide Based on Thin Film

Metalized polymer tubes for high-frequency electromagnetic waveguiding

3D Printed Waveguide for Augmented Reality

Design of Compact and Low-Emi Waveguide Structures Based on Through Glass Vias

MXene guides microwaves through 3D polymeric structures

Asymmetric Spp Waveguide Without Sacrificing the Size of Subwavelength Waveguide

Si Photonic Wire Waveguide Devices

A 3D Printed 300 GHz Waveguide Cavity Filter by Micro Laser Sintering

Ridged Waveguide Magic Tees Based on 3-D Printing Technology

A Wedge-to-wedge Plasmonic Waveguide for Subwavelength Confinement and Long-Range Propagation

Design and Fabrication of a Low-cost Liquid Optical Waveguide for Augmented Reality

Design and Construction of a Low Loss Substrate Integrated Waveguide (SIW) for S Band and C Band Applications

Enhanced Air Microcavity of Channel SPP Waveguide HALby Graphene Material

A Broadband Inline Transition From On-PCB Microstrip to Hybrid Stack-Up Integrated Additively Fabricated Air-Filled Waveguide

Free-standing millimeter-range 3D waveguides for on-chip optical interconnects

Investigation of Gliding Walled Multilayer Waveguides

Print! Place! Perform!: Additively Manufactured Surface-Mounted Bandpass Filter in X Band

Simplified High-Efficiency Soldering Method for the Fabrication of Devices on Empty Substrate Integrated Waveguides