Abstract:As a specific force sensor, the tri-axis accelerometer is one of the core instruments in an inertial navigation system (INS). During navigation, its measurement error directly induces constant or alternating navigation errors of the same order of magnitude. Moreover, it also affects the estimation accuracy of gyro drift coefficients during the initial alignment and calibration, which will indirectly result in navigation errors accumulating over time. Calibration can effectively improve measurement accuracy of the accelerometer. Device-level calibration can identify all of the parameters in the error model, and the system-level calibration can accurately estimate part of these parameters. Combining the advantages of both the methods and making full use of the precise angulation of the space-stabilized platform, this paper proposes a three-stage accelerometer self-calibration technique that can be implemented directly in the space-stable INS. The device-level calibration is divided into two steps considering the large amount of parameters. The first step is coarse calibration, which identifies parameters except for the nonlinear terms, and the second step is fine calibration, which not only identifies the nonlinear parameters, but also improves the accuracy of the parameters identified in the first step. The follow-on system-level calibration is carried out on part of the parameters using specific force error and attitude error to further improve the calibration accuracy. Simulation result shows that by using the proposed three-stage calibration technique in the space-stable INS, the estimation accuracy of accelerometer error can reach 1 x 10(-6) g order of magnitude. Experiment results show that after the three-stage calibration, the accuracy of latitude, longitude, and attitude angles has increased by over 45% and the accuracy of velocity has increased by over 22% during navigation.

Installation Error Calibration Method of Stellar/inertial Integrated Navigation System for Star Tracker with Narrow Field of View

System-Level Calibration for the Star Sensor Installation Error in the Stellar-Inertial Navigation System on a Swaying Base.

Assembly and Calibration System for APS of Star Sensor

Star sensor installation error calibration in stellar-inertial navigation system with a regularized backpropagation neural network

Accelerometer Bias and Star Sensor Installation Error Joint Calibration for the SINS/CNS Integrated Navigation System Using Attitude Maneuver

Installation angle calibration between the star sensor and gyro unit using the equivalent rotation vector transformation

All-Parameter System-Level Calibration for SINS/CNS based on global observability analysis

A System-Level Self-Calibration Method for Installation Errors in A Dual-Axis Rotational Inertial Navigation System

Extrinsic Parameter Calibration Method for a Visual/Inertial Integrated System with a Predefined Mechanical Interface

Laboratory Calibration of Star Tracker with Brightness Independent Star Identification Strategy

Error coupling analysis of the laboratory calibration method for a star tracker

Calibration method of strapdown inertial measurement unit based on two-axis turntable

On-Orbit Calibration of Installation Parameter of Multiple Star Sensors System for Optical Remote Sensing Satellite with Ground Control Points

On-orbit calibration of domestic APS star tracker

An Improved Fast Self-Calibration Method for Hybrid Inertial Navigation System under Stationary Condition

A Decoupling Three-Position Calibration Method Based on Observability Analysis for SINS/CNS Integrated Navigation

Calibration for Strapdown Micro Inertial Navigation System

Modeling and Online Calibration for SINS/CNS Asynchronous Time With NFOV Star Tracker

Optical system error analysis and calibration method of high-accuracy star trackers.

A Three-Stage Accelerometer Self-Calibration Technique For Space-Stable Inertial Navigation Systems

Calibration method of high-accuracy star sensor