Abstract:This study conducts an in-depth evaluation of imaging algorithms and software and hardware architectures to meet the capability requirements of real-time image acquisition systems, such as spaceborne and airborne synthetic aperture radar (SAR) systems. By analysing the principles and models of SAR imaging, this research creatively puts forward the fully parallel processing architecture for the back projection (BP) algorithm based on Field-Programmable Gate Array (FPGA). The processing time consumption has significant advantages compared with existing methods. This article describes the BP imaging algorithm, which stands out with its high processing accuracy and two-dimensional decoupling of distance and azimuth, and analyses the algorithmic flow, operation, and storage requirements. The algorithm is divided into five core operations: range pulse compression, upsampling, oblique distance calculation, data reading, and phase accumulation. The architecture and optimisation of the algorithm are presented, and the optimisation methods are described in detail from the perspective of algorithm flow, fixed-point operation, parallel processing, and distributed storage. Next, the maximum resource utilisation rate of the hardware platform in this study is found to be more than 80%, the system power consumption is 21.073 W, and the processing time efficiency is better than designs with other FPGA, DSP, GPU, and CPU. Finally, the correctness of the processing results is verified using actual data. The experimental results showed that 1.1 s were required to generate an image with a size of 900 × 900 pixels at a 200 MHz clock rate. This technology can solve the multi-mode, multi-resolution, and multi-geometry signal processing problems in an integrated manner, thus laying a foundation for the development of a new, high-performance, SAR system for real-time imaging processing.

Bistatic PFA Parallel Algorithm Based on Double Chirp-Z Transforms and the Dsp Implementation

Real time imaging processing of ground-based SAR based on multicore DSP

The Implement of Spaceborne SAR Imaging System

FPGA-Based Parallel Processing for Fast Time-Domain Imaging Algorithm of SAR

A Spaceborne Synthetic Aperture Radar Partial Fixed-Point Imaging System Using a Field- Programmable Gate Array-Application-Specific Integrated Circuit Hybrid Heterogeneous Parallel Acceleration Technique

A Spaceborne Synthetic Aperture Radar Partial Fixed-Point Imaging System Using A Field- Programmable Gate Arrayapplication-Specific Integrated Circuit Hybrid Heterogeneous Parallel Acceleration Technique

Joint FPGA and Multi-DSP SAR Efficient Imaging System Based on WFBP Algorithm

Design of Real-Time ISAR Imaging System Based on Parallel DSP

Parallel Optimisation and Implementation of a Real-Time Back Projection (BP) Algorithm for SAR Based on FPGA

Application of Real-Time Signal Processing in Chirp Scaling SAR Imaging

Real-Time Spaceborne Synthetic Aperture Radar Float-Point Imaging System Using Optimized Mapping Methodology and a Multi-Node Parallel Accelerating Technique

A SAR PARALLEL PROCESSING ALGORITHM AND ITS IMPLEMENTATION

Multi-DSP real-time parallel processing system for image compression

SAR Real-Time Imaging Pipeline Technology Based on Multi-Core DSP

Fast Processing of UAV Remote Sensing Image Based on DSP Hardware Simulation Platform

Optimized Implementation of Onboard Real-time Imaging for High-resolution Space-borne SAR

A DSP/FPGA - Based Parallel Architecture for Real-time Image Processing

The Polar Format Imaging Algorithm Based on Double Chirp-Z Transforms

Design of A Flexible High-Performance Real-Time Sar Signal Processing System

Parallel Implementation of SAR Imaging on DAWNING3000

DSP implementation of quick-look algorithm of space-borne synthetic aperture radars