Abstract:This article proposes a new finite control set model predictive control (FCS-MPC) strategy that simultaneously evaluates two targeting control objectives including speed and currents in a single cost function, achieving high-performance single-closed-loop control structure. Besides, aiming at the calculation delay problem of the model predictive control controllers, a novel calculation delay compensation method by predicting the current variation within the delay time is proposed. In this article, an improved machine model that is especially designed for the multiobjective FCS-MPC operation is illustrated at first. Then, a new cost function that can evaluate the tracking performance of speed and d-axis current and the steady-state performance of the q-axis current is developed. Compared with the conventional FCS-MPC approaches, extra speed controllers are not needed so that the proposed control topology becomes simpler. Then, in order to tune the weighting factors for the speed and currents in the cost function, an efficient handling strategy containing two implementation procedures, state variable normalization and balance of state sensitivity to voltage alteration, is developed. Finally, a brand-new computation delay estimation and compensation technique based on the dual sampling within a control period is proposed to reduce the current and torque ripples during the control process. Comparative simulation and experiments conducted on a three-phase 1.5-kW permanent magnet synchronous machine drive system are employed to verify the effectiveness of the proposed techniques.

A MPTC Optimization Scheme for PMSM Based on Flux Error Tracking and PSO

Current Control for PMSM Based on Model Predictive Control with Automatic Differentiation

Model predictive flux control for permanent magnet synchronous motor

Fast Response Model Predictive Torque and Flux Control with Low Calculation Effort for PMSMs

IPMSM Model Predictive Control in Flux-Weakening Operation Using an Improved Algorithm

A High-efficiency PMSM Sensorless Control Approach Based on MPC Controller

Disturbance Compensation-Based Model Predictive Flux Control of SPMSM with Optimal Duty Cycle

Modeling and Simulation of Permanent Magnet Synchronous Motor Optimization Control System

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Robust Deadbeat Finite-Set Predictive Torque and Flux Control for PMSM with Dynamic Model

Model Predictive Direct Torque Control for PMSM Drives in M–T Frame

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Multiobjective Finite Control Set Model Predictive Control Using Novel Delay Compensation Technique for PMSM

Finite Control Set Model Predictive Control for PMSM Based on Imposed Weighting Factor

Model Predictive Direct Torque Control for PMSM with Duty Cycle Optimization

An Improved Model Predictive Torque Control for PMSM Drives Based on Discrete Space Vector Modulation

Model Predictive Control of PMSM Based on Feedback Linearization

Predictive Torque Control for PMSM Based on Weighting Factor Elimination and Fast Voltage Vector Selection

Design of Model Predictive Control Weighting Factors For PMSM Using Gaussian Distribution Based Particle Swarm Optimization

A Simplified Model Predictive Control for Open-Winding PMSM

New model based predictive torque control algorithm in combination with duty ratio modulation strategy for flux-switching permanent magnet synchronous machines