Abstract:The MAX phase has attracted much attention due to its unique properties combined with the merits of both metal and ceramic, including the low density, high electrical conductivity and good oxidation resistance, which makes it significant for possible applications in various high temperature or other environments. There is a lot of research work on Ti2AlX (X=C, N). However little research about thermodynamic properties at high pressure is carried out. So we study the structural, mechanical and thermodynamic properties of Ti2AlC and Ti2AlN at various pressures and temperatures. The first-principles calculations based on electronic density-functional theory framework are used to investigate the properties at various pressures. The cut-off energy is 350 eV. Converged results are achieved with 10102 special K-point meshes. The self-consistent convergence of total energy is set to be 5.010-6 eV/atom. According to the calculated structural parameters at various pressures, we can find that the ratios V/V0 (V0 denotes the system volume at 0 GPa) of Ti2AlX are reduced by 20.59% and 18.93%, respectively, so the compressibility of the system is strong. As the internal pressure increases, the curves of V/V0 become gentle. Then we calculate elastic constants at pressures ranging from 0 to 50 GPa in steps of 10 GPa. It is obvious that the Ti2AlX is mechanically stable because all of the elastic constants satisfy the Born stability criteria. The bulk modulus, shear modulus and Young's modulus linearly increase with internal pressure increasing, implying that the pressure can improve the resistance to volume deformation. The ductility and brittleness can be judged according to Pugh's criterion (ratio of bulk modulus to shear modulus B/G), and the brittle nature turns into ductile nature in a pressure range of 40-50 GPa for the Ti2AlX since the value of B/G exceeds 1.75. Finally, we study the thermodynamic properties at various pressures and temperatures based on the quasi-harmonic Debye approximation theory, including the bulk modulus, heat capacity and thermal expansion coefficient. The bulk modulus decreases with temperature increasing but increases with pressure increasing. The heat capacity at constant volume Cv and the heat capacity at constant pressure Cp have the same variation tendency, while Cv obeys the Dulong-Petit limit. It is easy to see that temperature and pressure have opposite influences on heat capacity and the effect of temperature is more significant than that of pressure. The effects of temperature and pressure on linear expansion coefficient mainly occur at low temperature and the effect of pressure is not so considerable when the pressure exceeds 30 GPa. Above all, the effects of temperature and pressure on thermodynamic properties are inverse.

Thermal Conductivity of Helium and Argon at High Pressure and High Temperature

Brillouin Scattering Studies Of Liquid Argon At High Temperatures And High Pressures

A Practical Vapor Pressure Equation for Helium-3 from 0.01K to the Critical Point

Equation of State for Normal Liquid Helium-3 from 0.1 to 3.3157 K

Evaluation and comparison of thermal conductivity of food materials at high pressure

Hydrostaticity of pressure-transmitting media for high pressure infrared spectroscopy

Brillouin Scattering Study on Molecular Liquid under High Pressure and High Temperature Conditions

The Acoustic Velocity, Refractive Index, and Equation of State of Liquid Ammonia Dihydrate under High Pressure and High Temperature

Thermal Conductivity of Hydrogen at High Pressure and High Temperature: Implications to Giant Planets

Strength, Anisotropy, and Preferred Orientation of Solid Argon at High Pressures.

The Velocity, Refractive Index, and Equation of State of Liquid Ammonia at High Temperatures and High Pressures.

Thermal conductivity of materials under pressure

Pressure-Dependent Thermal Expansion Coefficient by a Diamond Anvil Cell

The Velocity and Elastic Constants in Fluid Oxygen under High Pressures and High Temperature

Laser Heating and X-ray Microdiffraction : A Powerful Tool to Study Melting of Metals at Extremely High Pressures and Temperatures

Measurement of Thermal Diffusivity at High Pressure Using a Transient Heating Technique

Helium under high pressure: A comparative study of all-electron and pseudopotential methods within density functional theory

Structural, Mechanical, and Thermodynamic Properties of Ti2AlX (X = C, N) at High Pressure

High Temperatures and High Pressures Brillouin Scattering Studies of Liquid H2O+CO2 Mixtures

In situ synchrotron X-ray diffraction with laser-heated diamond anvil cells study of Pt up to 95 GPa and 3150 K

CALCULATION OF THERMODYNAMIC PROPERTIES OF HELIUM-3 BETWEEN 1K AND 100 K