Abstract:In the development of advanced steel, accurate and detailed knowledge about the kinetics of phase transformations and microstructure formation is critical. The critical issue in pearlite-austenite transformation is the consideration of diffusional paths of the alloy element. Simulation has been an available method to study the diffusion of alloy elements and the migration rate of the phase boundary in the complex morphological evolution of austenite growth. The isothermal pearlite-austenite transformations at 720 and 740 degrees C in Fe-0.6%C-2%Mn (mass fraction) alloy were studied by phase-field methods based on MICRESS. At different temperatures, the effects of diffusional paths on the austenite transformation were discussed. To achieve a semiquantitative verification of the simulated results, the migration rates of the austenite/pearlite boundary at 720 and 740 degrees C were estimated from the experimental kinetics curves by fitting the JMA equation. By measuring the Mn profile in austenite, the modes of the austenization at 720 and 740 degrees C can be verified as partitioned local equilibrium (PLE) and non-partitioned local equilibrium (NPLE) modes. The heterogeneous distribution of Mn in austenite at 740 degrees C can be observed with STEM-EDS. However, the homogenous distribution of Mn can be found near the pearlite/austenite boundary in austenite at 720 degrees C. The cases considering the gamma, alpha, and interface-diffusional paths were simulated by phase-field methods to compare with the migration rates of the austenite/pearlite boundary. Because carbon is an interstitial element in steel and has an interstitial diffusional mechanism, it can be speculated reasonably that the diffusion of C mainly proceeded in austenite and ferrite through the considerations of the atom-size of carbon and the experimental results. Phase-field methods were used to study Mn diffusion in the lamellar pearlite-austenite transformation. With the analysis of the experimental estimations, the interface-diffusional path was observed as the dominant path for the Mn diffusion. It is because the Mn atoms have greater diffusivity in interfaces than in gamma or alpha-diffusional paths. Furthermore, the diffusional activation energy is closely related to the diffusivity of Mn at the interface. Moreover, compared with the gamma-diffusional path, the diffusional flux of Mn in ferrite is much larger than that in austenite. Thus, it can be concluded that the contribution of the alpha-diffusional path to the migration rate of the pearlite/austenite boundary is larger than that of the gamma-diffusional path. As a result, considering the alpha-diffusional path in the thermodynamics analysis under NPLE mode makes more sense. However, ignoring the interface- and alpha-diffusional path, which is different from the traditional cognition in PLE mode, will result in a magnitude error for the thermodynamics analysis.

A Phase Field Study of the Influence of External Loading on the Dynamics of Martensitic Phase Transformation

Modifying macroscale variant combinations in a two-dimensional structure using mechanical loadings during thermally induced transformation

Computational Simulation by Phase Field: Martensite Transformation Kinetics and Variant Selection under External Fields

Analysis of Martensitic Transformation Plasticity Under Various Loadings in a Low-Carbon Steel: An Elastoplastic Phase Field Study

A Three-Dimensional Model of Magneto-Mechanical Behaviors of Martensite Reorientation in Ferromagnetic Shape Memory Alloys

Effect of Nonlinear and Noncollinear Transformation Strain Pathways in Phase-Field Modeling of Nucleation and Growth During Martensite Transformation

Phase-based constitutive modeling and experimental study for dynamic mechanical behavior of martensitic stainless steel under high strain rate in a thermal cycle

A micro-mechanical model of non-thermo-elastic martensitic transformation

A Multi-Phase Model for Transformation Plasticity Using Thermodynamics-Based Metallurgical Algorithm

Phase Field Study of the Microstructural Dynamic Evolution and Mechanical Response of NiTi Shape Memory Alloy under Mechanical Loading

Finite Element Simulation of Phase Field Model for Nanoscale Martensitic Transformation

Modelling of martensitic phase transformation accounting for inertia effects

Phase field study of heat treatment and strengthening in maraging steels

A model of phase transition from austenite to martensite in single-crystal NiMnGa alloys

Micromechanics Model of Martensitic Transformation-Induced Plasticity

Phase Field Simulation of Eutectoid Microstructure During Austenite-Pearlite Phase Transformation

A three-dimensional phase-field model for studying the orientation-dependent interface evolution in stress-induced martensitic phase transformation

Study of Phase Transformations and Interface Evolution in Carbon Steel under Temperatures and Loads Using Molecular Dynamics Simulation

Study of Thermoelastic Martensitic Transformations Using a Phase-Field Model

Phase Field Study of the Diffusional Paths in Pearlite-Austenite Transformation

Three-dimensional phase field model of proper martensitic transformation