Online DC-Link Capacitance Monitoring for Digital-Controlled Boost PFC Converters without Additional Sampling Devices
Zhaoyang Zhao,Pooya Davari,Weiguo Lu,Frede Blaabjerg
DOI: https://doi.org/10.1109/tie.2022.3153825
IF: 7.7
2022-01-01
IEEE Transactions on Industrial Electronics
Abstract:Aluminum electrolytic capacitors (Al-Caps) are widely used in the dc link of acdc applications; however, they are one of the weakest components in power electronic converters. With the degradation of Al-Cap, its capacitance (C) decreases, and the equivalent series resistance increases. Based on this, many efforts have been made to realize condition monitoring (CM) of Al-Caps. Unfortunately, additional hardware (including current sensors and sampling circuits) andor powerful data processing tools are usually required, which increases the cost and would bring new reliability risks. Considering this issue, this article presents a transient-based CM scheme for dc-link capacitors in digital-controlled boost power factor correction (PFC) converters, which does not need additional sampling devices. By analyzing the relationship between large-signal transient voltage profile and dc-link capacitance, a calculation model is established. Based on the sampled voltage and current signals used for digital control, the dc-link capacitance can be online estimated. Its feasibility is validated in simulation with a boost PFC operating in continuous conduction mode (CCM) and discontinuous conduction mode. Furthermore, taking a 1-kW boost PFC operating in CCM as a case study, experimental results illustrate that the estimation errors of the dc-link capacitance are less than 3.5 (error of a single test) and 1.5 (average error of multiple tests).
automation & control systems,engineering, electrical & electronic,instruments & instrumentation