Abstract:The multiscale model for brittle granular materials generally involves three scales: elementary particles at the microscale, grains at the mesoscale, and grain piles at the macroscale. The multiscale model was created based on the discrete element method (DEM). To apply it to dynamic loading, parameters for two contact models and two bonding models were firstly analyzed, and connections between the micro and meso model parameters and the macro material constants were also discussed. Then, the dynamic multiscale model for quartz sand was created with the Hertz-Mindlin contact model and the parallel-bond model. Through selecting appropriate strength and local damping parameters, it is observed that the dynamic compression properties of the simulated sand agree well with the experimental results on quartz sand at both the meso and macro scale. With the calibrated model, the influence of the local damping mechanism which is closely related to dynamic loading, on the dynamic responses of the multiscale model was investigated. Results show that a higher damping level results in a stronger wave-attenuation ability of brittle granular materials. However, excessively high damping will result in an aberrant loading-velocity effect at both the meso and macro scale (the latter is actually the micro inertial effect induced by high damping). In addition, high damping can attenuate the waves emitted during the particle breakage process and reduce the breakage extent. At last, the multi-scale model was slightly modified and used to study the dynamic particle breakage property of brittle granular materials. The modified model can yield grain-size-distribution curves consistent with the experimental ones. Moreover, it can reveal the heterogeneous distribution of particle breakage at the space scale, which refers to the clustering phenomenon of microcracks caused by the interactions between the wave-producing and wave-attenuation mechanism in the particle breakage process.

A Thermodynamically Consistent 3D Breakage Model Considering Intermediate Principal Stress for Granular Crushing Problems

Constitutive Model for Granular-Fluid Flows Based on Stress Decomposition

A Hypoplastic Constitutive Model for Granular Materials with Particle Breakage

UH model considering particle crushing

Discrete Numerical Modeling of Granular Materials Considering Crushability

Monte Carlo Simulation of Complex Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials: A 3D Study

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

An extended hypoplastic constitutive model considering particle breakage for granular material

Effect of the intermediate principal stress on the mechanical behaviour of breakable granular materials using realistic particle models

A simple gradation-state-dependent model for granular materials

A state-dependent hyperelastic-plastic constitutive model considering shear-induced particle breakage in granular soils

A Constitutive Model for Granular Materials Subjected to a Large Stress Range

An Elasto-Plastic Model For Aggregates Considering Particle Crushing

A constitutive model for crushable sands involving compression and shear induced particle breakage

Anisotropic Breakage Mechanics for cemented granular materials

Compression Model of Crushable Granular Materials Considering Particle Size Effect

Modeling Mechanical Behavior of Very Coarse Granular Materials

Investigation On Dynamic Multiscale Model For Brittle Granular Materials

Critical State Elasto-Plastic Model for Coarse Granular Aggregates Incorporating Particle Breakage

Characteristics of particle breakage and constitutive model of coarse granular material incorporating gradation evolution

A Three-Dimensional Statistical Damage Constitutive Model for Geomaterials