Abstract:Numerical simulations were performed to investigate the effects of equivalence ratio distribution on the combustion performance of a liquid kerosene fueled dual-staged scramjet combustor. High enthalpy vitiat-ed inflow at a total temperature of 1231K was supplied using a hydrogen-combustion heater. The Mach number at combustor inlet was 2.0. The fuel was injected into the combustor using crossed dual-strut. The global equiva-lence ratio was held constant to be 0.8,and three injection distribution schemes were conducted. The two-equa-tion k-ωSST turbulence model was adopted to simulate the turbulence. The discrete phase model was utilized to predict the breakup, atomization, evaporation, and the coupling with the continuous phase of the liquid kero-sene. The partial-premixed steady flame model was applied to consider the turbulence-combustion interaction. The n-decane was selected as the surrogate fuel of kerosene. Its skeletal mechanism included 40 species and 141 steps. The calculated wall pressure profiles in three fuel distribution schemes agreed well with the experimental values, illustrating that the present numerical method can provide a relatively accurate description of the super-sonic combustion process of high molecular hydrocarbon fuels.Further analysis on the reacting flow field demon-strated that two reaction regions occurred in the combustor: the upstream reaction region was anchored at the trailing edge of the upstream strut,and the downstream one at the trailing edge of the downstream strut. With the upstream equivalence ratio increased from 0.1 to 0.3,the upstream reaction region was gradually trans-ferred from its symmetric structure located in the vertical middle of the flow path to an asymmetric structure inclined towards the corner of the bottom and side walls;while the downstream one was contracted. The origi-nal location of the pre-combustion shock train propagated upstream. The flow entering into the upstream re-action region was gradually transferred from supersonic to subsonic,while that entering into the downstream reaction region from subsonic to supersonic. The exit total pressure recovery coefficient monotonically in-creased from 37.6% to 41.1%,while the net thrust was monotonically decreased from 366.4N to 331.8N. However,there was no monotonic correlation between the exit combustion efficiency with the upstream equivalence ratio.

Effect of Thermal Boundary Condition and Turbulent Models on the Combustion Simulation of Ethylene-Fueled Scramjet Combustor

Application and Theoretical Analysis of the Flamelet Model for Supersonic Turbulent Combustion Flows in the Scramjet Engine

Large Eddy Simulation of Flame Structure and Combustion Mode in a Hydrogen Fueled Supersonic Combustor

Effect of Combustor Geometry and Fuel Injection Scheme on the Combustion Process in a Supersonic Flow

Direct numerical simulation of supersonic internal flow in a model scramjet combustor under a non-reactive condition

Parametric Effects on the Combustion Flow Field of A Typical Strut-Based Scramjet Combustor

Effect of boundary layer thickness on supersonic combustion in a scramjet combustor

Variation of inlet boundary conditions on the combustion characteristics of a typical cavity-based scramjet combustor

Investigation of Turbulent Models for the Flow Field from A Typical Strut-Based Scramjet Combustor

Experimental Study on the Combustion Process in a Scramjet Combustor with a Rear-Wall-Expansion Geometry

Combustion dynamics of high Mach number scramjet under different inflow thermal nonequilibrium conditions

Studies of Combustion Effects on Near-Wall Turbulence in Supersonic Flows by Large Eddy Simulation

Numerical Validation and Parametric Investigation on the Cold Flow Field of a Typical Cavity-Based Scramjet Combustor

Numerical Simulation of Scramjet Engine with Compressibility Corrections on K-Εmodel Based on OpenFOAM

Thermo-chemical nonequilibrium effects on combustion characteristics of a transverse jet in the scramjet

Numerical Simulation of the Interaction Between Shock Train and Combustion in Three-Dimensional M12-02 Scramjet Model

Combustion Characteristics in Scramjet Combustor Operating at Different Inflow Stagnation Pressures

Numerical Investigation on Effects of Equivalence Ratio Distribution on Performance of Scramjet Combustor with Dual-Staged Injections

Flow Structures and Combustion Regimes in an Axisymmetric Scramjet Combustor with High Reynolds Number

Simulations of a Cavity Based Two-Dimensional Scramjet Model

Numerical Simulations of A Typical Hydrogen Fueled Scramjet Combustor with A Cavity Flameholder