The impact of bathymetry on a laboratory-scale two-layer flow
Y. Yuan,Y. Lv,L.T. Lin,Z. He
2016-01-01
Abstract:The stratified flow over complex bathymetry has received great interest over recent decades. Many studies have applied the internal hydraulic control and maximal two-layer exchange theory to interpret the mixing and entrainment between two layers. However, the dynamical behavior of the simplest twolayer flow, a dense saline current intruded into quiescent uniform density ambient water with various bathymetries, is not yet fully understood. In this study, we designed a series of laboratory experiments to compare dense current flows over an obstacle, such as a sill at the river mouth. All experiments were carried out in a long flume over a range of density difference with various obstacle shape and height. Cross-section view of the dense current is visualized by potassium permanganate and the velocity field is measured with the Particle Imaginary Velocimetry (PIV) technique. The laboratory results will be compared with 2-1/2 layer flow theory and used to inform the field observation data at a narrow channel with complex bathymetry near Zhoushan, China. Introduction Gravity currents, also called dense currents, are driven by a density difference between two regions of fluid and play an important role in the exchange of materials between two fluids (Simpson, 1999). Much of our understanding of gravity currents is based on lock-exchange experiments under a flat bottom condition. A number of studies have examined the propagation of the gravity currents using lock-exchange laboratory experiments. When the gravity currents move along the flat-bottom in uniform density ambient water, the front velocity quickly rises to the maximum velocity and maintains a constant speed for at least six lock-lengths and then decreases due to the bottom friction (Nogueira et al., 2013). Huppert and Simpson (1980) divided this process into three phases, i.e., the slumping phase, inertial phase and viscous phase. However, gravity currents in geophysical environments and engineering processes often encounter complicated bathymetries, such as a sill at the river mouth or a dyke in the reservoir. When gravity currents meet an obstacle, both in natural and man-made environment, only a portion of current would flow over the obstacle (Lane-Serff et al., 1995), or even be completely blocked if the obstacle higher than 2 times of the dense current height (De Ceasare et al., 2008). To investigate the impacts of obstacles on gravity currents, a number of laboratory experiments have been conducted. For instance, Oshaghi et al. (2013; 2014) studied the effect of inlet Froude number on turbidity currents passing over an obstacle. Asghari Pari et al. (2010) investigated the effects of obstacle height on controlling turbidity current. Greenspan and Young (1978) did a series of experiments on gravity currents encountering different shape obstacles. They suggested that the shape of obstacle does not affect the gravity current propagation speed. Prinos (1999) conducted a series of experiments using triangle and semi-circular shaped obstacle and found the similar conclusion. In the present study, the advanced measurement technique allows detailed analysis of gravity current velocity field around the obstacle. The manuscript is organized as follows. In section 2, we describe the experimental setup and two main measurement approaches. We present the experimental results of influence on propagation speed and energy under different conditions in section 3. Our conclusions are summarized in section 4. Experiment methods A schematic of the lock-exchange experiment is shown in Figure 1. All experiments were conducted in a rectangular tank of 200 cm long, 20 cm wide, and 20 cm deep. The head tank with length of 9.5 cm was separated from the rest of tank by the lock. In all experiments, ambient fresh water and dense saline water were filled to two sides of the lock simultaneously until the water level on both sides reached to 19 cm. The obstacle with different shape and height was placed at 47.5 cm downstream of the lock (i.e., 5 times of the head tank length). The distance between the obstacle and lock ensure the gravity current reaches the obstacle during the steady phase (Gonzalerz-Juez and Meiburg, 2009). To initiate the experiment, the electric gate was removed rapidly and smoothly to minimize the possible disturbance. Figure 1. Side view (upper) and plan view (lower) of the channel used in the experiments for gravity currents meeting the obstacle. The ambient is filled with fresh water, and dense saline water is confined in the lock region (dark gray region). All measurements are in cm. In the qualitative experiment, the dense saline water was dyed with potassium permanganate (Dai, 2013). A digital camcorder with resolution of 4928 pixel × 3264 pixel at a frame rate of 25 fps was placed on the side of the water tank to obtain the overall view of flow motion. In the quantitative experiment, we investigated the detailed velocity field and mixing processes of dense saline current using an advanced Particle Image Velocimetry (PIV) technique. A MGL-N-532 continuous wave laser was mounted on top of the obstacle to create a laser sheet at the study region, which is about 30 cm x 22 cm. The PIV images were captured by charge-couple device (CCD) camera with a resolution of 2320 pixel × 1726 pixel at a frame rate of 200 fps. obstacle obstacle ambient water dense water