Abstract:The Concrete-infilled Double Steel Corrugated-plate Wall (CDSCW) consists of a corrugated part and vertical boundary elements. The corrugated part is composed of outer steel corrugated plates (SCPs), infilled concrete, and intermediate bolts connecting the outer plates. The vertical boundary elements may adopt the concrete-filled steel tubes (CFSTs). This paper presents experimental and numerical investigations into the seismic performance of CDSCWs. Firstly, two specimens with different axial compression ratios were tested under combined axial compression and cyclic lateral loads. The experimental results indicated that the CDSCWs had significant ductility and excellent seismic performance. It was observed that the sufficient strength and stiffness of boundary elements were vital in achieving high load-bearing capacity and ductility of CDSCWs. The failure of the experimental specimens was closely related to the axial compression ratio, involving local buckling and fracture of SCPs and steel tubes and crushing of the infilled concrete. Subsequently, an additional numerical investigation into the performance of CDSCWs was carried out using a finite element (FE) model validated through the test data. The effects of the shear span-to-depth ratio, the axial compression ratio, the strength and stiffness of the boundary elements, and the width-to-thickness ratio of the steel tubes on the load-bearing capacities of CDSCWs are involved in this investigation. It is found that the CDSCWs with small shear span-to-depth ratios are mainly subjected to bending-shear failure, while those with large shear span-to-depth ratios are subjected to compression-bending failure. The strength and ductility of CDSCWs could be improved by strengthening the strength and stiffness of the boundary elements and limiting the width-to-thickness ratio of steel tubes. The conclusions obtained can provide fundamentals for further improving the strength design of CDSCWs.

Experimental Study on Axial Resistant Behavior of Multi-Celled Corrugated-Plate CFST Walls

Axial Compressive Behavior of Multi-Celled Corrugated-Plate CFST Walls: Tests and Numerical Simulations

Axial compressive performance and design of multi-celled corrugated-plate CFST walls

Stability behavior of multi-celled corrugated-plate concrete filled steel tubular walls

Stability Design of Multi-Celled Corrugated-Plate CFST Walls under Combined Axial and In-Plane Bending Loads

Experimental Study on Axial Compressive Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Experimental Study On Seismic Behavior Of Innovative Multi-Cellular Cft-Walls With Tie-Bolts

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Flexural Tests and Behavior of Multi-Celled Corrugated-Plate CFST Members

Experimental Study on Edge Cell Partially-Replaced Joint for I-beam to Multi-Celled CFST Walls under Cyclic Loading

Seismic experiments and shear resistance prediction of multi‐celled corrugated‐plate CFST walls

Experimental evaluation on seismic performance of multi-celled corrugated-plate CFST walls

Combined Axial and Flexural Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Global Buckling Design of Multi-Celled CFST Walls with Four Simply-Supported Edges

Numerical Study on Ultimate Axial Resistance of Novel Fold-Fastened Multi-Cellular Steel Walls

Testing on Global Stability Performance of Multi-Celled CFST Walls with Three Simply-Supported Edges

Global Stability Tests and Design of Multi-Celled Concrete-Filled Steel Tubular Walls

Sectional Strength Design of Concrete-Infilled Double Steel Corrugated-Plate Walls with T-section

Experimental Study of Steel Plate Composite Shear Wall Units under Cyclic Load

Behavior of eccentrically loaded rectangular CFST components for shear walls using double horizontally-corrugated steel plates

Experimental and Numerical Study on Seismic Performance of Concrete-Infilled Double Steel Corrugated-Plate Walls