Abstract:In this report, a novel type of cupric oxide (CuO) nanoparticles-modified multi-walled carbon nanotubes (MWCNTs) array electrode for sensitive nonenzymatic glucose detection has been fabricated. The morphology of the nanocomposite was characterized by transmission electron microscopy and X-ray diffraction. The electrochemical performance of the CuO/MWCNTs electrode for detection of glucose was investigated by cyclic voltammetry and chronoamperometry. The CuO/MWCNTs electrode showed much higher electrocatalytic activity and lower overvoltage than the bare MWCNTs electrode towards oxidation of glucose. At an applied potential of +0.40V, the CuO/MWCNTs electrode presented a high sensitivity of 2596μAmM−1cm−2 to glucose. In addition, linear range was obtained over a concentration up to 1.2mM with a detection limit of 0.2μM (signal/noise=3). The response time is about 1s with addition of 0.10mM glucose. More importantly, the CuO/MWCNTs electrode is also highly resistant against poisoning by chloride ion, and the interference from the oxidation of common interfering species such as ascorbic acid, dopamine, uric acid and carbohydrate compounds is effectively avoided. In addition, the CuO/MWCNTs electrode was also used to analyze glucose concentration in human serum samples. The CuO/MWCNTs electrode exhibits an enhanced electrocatalytic property, low working potential, high sensitivity, excellent selectivity, good stability, and fast amperometric sensing towards oxidation of glucose, thus is promising for the future development of nonenzymatic glucose sensors.

0D/1D Heterostructured Au@Cu2O/CuO/Cu(OH)2 with Multivalent Cu(I)/Cu(II) for Efficient and Bendable Glucose Sensing

0D/1D Heterostructured Au@Cu 2 O/CuO/Cu(OH) 2 with Multivalent Cu(I)/Cu(II) for Efficient and Bendable Glucose Sensing

A Highly Sensitive Nonenzymatic Glucose Sensor Based on Cu/Cu2O Composite Nanoparticles Decorated Single Carbon Fiber

In-situ construction of Au/Cu2O nanowire arrays for sensitive glucose sensing

Controllable morphology engineering of Cu 2 O nanoparticles for non-enzymatic glucose sensing

Highly Sensitive And Portable Electrochemical Detection System Based On Aunps@Cuo Nws/Cu2o/Cf Hierarchical Nanostructures For Enzymeless Glucose Sensing

CuO nanostructures on N-doped carbon cloth for flexible enzyme-free glucose sensing

Fabrication of Bimetallic Cu/Au Nanotubes and Their Sensitive, Selective, Reproducible and Reusable Electrochemical Sensing of Glucose

A Sensitive and Selective Non-Enzymatic Glucose Sensor Based on AuNPs/CuO NWs-MoS2 Modified Electrode

Facile Synthesis of CuCo2O4@NiCo2O4 Hybrid Nanowire Arrays on Carbon Cloth for a Multicomponent Non-Enzymatic Glucose Sensor

Facile synthesis of nanospindle-like Cu2O/straight multi-walled carbon nanotube hybrid nanostructures and their application in enzyme-free glucose sensing

A highly sensitive nonenzymatic glucose sensor based on CuO nanoparticles-modified carbon nanotube electrode.

Au-wrapped CuS-Interlaced Chain Structure for Ultrafast Response and High Sensitive Non-Enzymatic Glucose Sensor

Integrating Cu/Cu<sub>x</sub>O ternary nanocomposites with multi-walled carbon nanotubes enabling a high-performance nonenzymatic amperometric glucose sensor

Copper Nanoparticle/Graphene Oxide/Single Wall Carbon Nanotube Hybrid Materials As Electrochemical Sensing Platform for Nonenzymatic Glucose Detection

Substantially boosting the performance of non-enzymatic glucose sensing: Introducing a novel CuS nanosheet anchored on hollow Ni(OH) 2 nanosphere

Integrating Cu/CuxO X O Ternary Nanocomposites with Multi-Walled Carbon Nanotubes Enabling a Highperformance Nonenzymatic Amperometric Glucose Sensor

Facile Fabrication of Free-Standing Cu2O–Au Nanocomposite on Cu Foil for High Performance Glucose Sensing

Facile synthesis of CuCo 2 O 4 @NiCo 2 O 4 hybrid nanowire arrays on carbon cloth for a multicomponent non-enzymatic glucose sensor

Uniform and Dense Copper Nanoparticles Directly Modified Indium Tin Oxide Electrode for Non-Enzymatic Glucose Sensing

High-performance non-enzymatic glucose sensor based on flower-like Cu2O-Cu-Au ternary nanocomposites