Abstract:Random fiber lasers (RFLs), which employ random distributed feedback (RDFB) provided by the intrinsic Rayleigh scattering (RS) along the passive fiber, have gained wide attention in the last decade. A major advantage of Raman gain based RFL is wavelength flexibility, and the so-called cascaded Raman conversion can extend the operating wavelength considerably. However, frequently used silica fibers often need multiple Raman shifts to reach the final desired wavelength due to its peak frequency shift of similar to 13.2 THz. A good alternative is the phosphosilicate fiber which has a gain peak at similar to 39.8 THz. Nevertheless, the simultaneous existence of silica-related and phosphorus-related gain peaks in the phosphosilicate fiber intensifies the gain competition, further limiting the power scaling and the enhancement of spectral purity, even making it difficult to reach the desired wavelength. In this article, we experimentally explored the influences of the pump wavelength and bandwidth on the lasing performance of a phosphosilicate RFL, and measured the extreme frequency shift of the phosphorus-related Raman gain peak. Besides, by the aid of a modified power balance model, we qualitatively simulated the impacts of pump spectrum and boundary condition on the laser output. The simulation agrees well with the experimental results, and may also explain the parasitic lasing in the prior reports of phosphosilicate RFLs. As a result, the extreme frequency shift of phosphosilicate RFL is measured to be similar to 1 THz. And through optimizing the pump wavelength and pump bandwidth, 99.24% high spectral purity random lasing at 1237 nm with 33.1 W output power is obtained. This work may help to reveal the gain competition in phosphosilicate RFL and guide the future laser design.

Generation of 1.3/1.4 Μm Random Fiber Laser by Bismuth-Doped Phosphosilicate Fiber

More Than 200 W Random Raman Fiber Laser with Ultra-Short Cavity Length Based on Phosphosilicate Fiber

220 W Raman Fiber Laser at 1.24 Μm Based on Phosphosilicate Fiber

Direct generation of a 635 nm red random laser based on praseodymium (Pr)-doped ZBLAN fiber

Difference-Frequency Generation of Random Fiber Lasers for Broadly Tunable Mid-Infrared Continuous-Wave Random Lasing Generation

Single-frequency Yb-doped Fiber Laser with Distributed Feedback Based on a Random FBG

A half-open cavity random fiber laser based on a single-mode fiber and fiber Bragg grating

Multi-wavelength random fiber laser based on a tilted parallel inscribed apodized fiber Bragg grating array

Random laser emission at 1064 and 1550 nm in a Er/Yb co-doped fiber-based dual-wavelength random fiber laser

Efficient 1054 Nm Raman Random Fiber Laser

Random fiber laser formed by mixing dispersion compensated fiber and single mode fiber.

Low Quantum Defect Random Raman Fiber Laser.

Single-frequency random distributed Bragg reflector fiber laser

Temporally Stable Random Fiber Laser Operates at 1070 Nm

1450 Nm High Energy Noisy Multi-Pulse Mode-Locking in Bismuth-Doped Fiber Laser

Low-noise High-Order Raman Fiber Laser Pumped by Random Lasing.

A Theoretical Investigation of an Ultrawide S-, C- and L-Band-Tunable Random Fiber Laser Based on the Combination of Tellurite Fiber and Erbium-Doped Fiber

Near-diffraction-limited Linearly Polarized Narrow-Linewidth Random Fiber Laser with Record Kilowatt Output

Weak Feedback Assisted Random Fiber Laser from 45°-Tilted Fiber Bragg Grating

Common-cavity ytterbium/Raman random distributed feedback fiber laser

Investigations on the Extreme Frequency Shift of Phosphosilicate Random Fiber Laser