Thermodynamic Analysis of an Integrated System Based on Electrolytic Water Hydrogen Production and Energy Storage and Allam Cycle Power Generation

LI Zhe,WANG Keke,WANG Shunsen,LI Bo,YAN Xiaojiang,WANG Jiangfeng
DOI: https://doi.org/10.7652/xjtuxb202309001
2023-01-01
Abstract:In order to make full use of renewable energy and improve the efficiency of power generation system, an integrated system based on solid oxide electrolytic water hydrogen production energy storage and Allam cycle power generation was proposed. The high efficiency Allam cycle is applied to the energy storage system of electrolytic water hydrogen production. The energy storage of hydrolysis is responsible for providing fuel and pure oxygen for the Allam cycle. The thermodynamic calculation model of the system is established, and the simulation calculation of the system is carried out by MATLAB self-programming. The influences of turbine inlet and outlet parameters, isentropical efficiency of power equipment, electrolytic efficiency and minimum cycle temperature on the energy-generation system are analyzed. The results show that the efficiency of the integrated system reaches 54.47% and the energy storage density is 214.85 kW·h·m -3 under the design condition. There are optimal turbine inlet temperature, optimal turbine inlet pressure and optimal turbine outlet pressure to make the system efficiency reach the peak. Compared with other power equipment, the internal efficiency of the turbine has the greatest influence on the system performance. The internal efficiency of the turbine increases from 82% to 92%, and the system efficiency increases by 2.55 percentage points. System performance can be improved by reducing the minimum cycle temperature. When the minimum cycle temperature is reduced from 26℃ to -4℃, system efficiency is improved by 6.03 percentage points. This study has certain reference significance for the development of new large-scale electric energy storage technology, and the results of parameter analysis can provide theoretical support for practical engineering applications.
What problem does this paper attempt to address?