Abstract:High autogenous shrinkage property is one of the disadvantages of ultra-high-performance concrete (UHPC), which may induce early age cracking and threaten the safety of concrete structure. In the present study, different dosages of calcium sulfoaluminate (CSA) cement were added in UHPC as an effective expansive binder. Hydration mechanism, autogenous shrinkage property, and compressive strength of UHPC were carried out to investigate the effect of CSA addition on the mechanical properties of UHPC. Scanning electron microscopy was also employed to characterize the intrinsic microstructural reasons relating to the changes in macroproperties. Based on the XRD diagram, increasing formation of ettringite and Ca(OH)2 can be found with increasing CSA content up to 15%. In the heat flow results of UHPC with 10% CSA addition, the maximum heat release increases to 2.6 mW/g, which is 8.3% higher than the reference UHPC, suggesting a higher degree of hydration with CSA addition. The results in autogenous shrinkage show that CSA expansion agent plays a significantly beneficial role in improving the autogenous shrinkage of UHPC. The corresponding autogenous shrinkage of UHPC is −59.66 μ ε , −131.11 μ ε , and −182.31 μ ε , respectively, at 7 d with 5%, 10%, and 15% addition, which is 108%, 117%, and 123% reduction compared to the reference specimen without CSA. In terms of compressive strength, UHPC with 5%, 10%, 15%, and 20% CSA addition has 10.5%, 17.4%, 30.2%, and 22.1% higher compressive strength than that for the reference UHPC at 28 d. Microstructural study shows that there is an extremely dense microstructure in both the bulk matrix and interfacial transition zone of UHPC with 10% CSA addition, which can be attributed to the higher autogenous shrinkage property and can therefore result in higher mechanical performance.

Study of the Spent Catalysts As Internal Curing Agents on the Hydration Kinetics and Microstructure Development of Ultra-High Performance Concrete (UHPC)

Hydration kinetics and microstructure development of Ultra-High Performance Concrete (UHPC) by high volume of phosphorus slag powder

Uncovering the role of hydrophobic silica fume (HPS) in rheology, hydration, and microstructure of ultra-high-performance concrete (UHPC)

Mechanical Properties and Shrinkage of Ultrahigh-Performance Concrete Containing Lithium Carbonate and Nano-Calcium Carbonate

Design of self-compacting ultra-high performance concrete (SCUHPC) towards to the cementitious materials packing optimization

Synergistic Effect of Silica Fume and Ultra-Fine Glass Microsphere on Macro Properties and Hydration of Coarse-Aggregate UHPC

Mechanical and Drying Shrinkage Performance Study of Ultra-High-Performance Concrete Prepared from Titanium Slag under Different Curing Conditions

Effects of steel chips on the microstructure, mechanical property, and durability of ultra-high-performance concrete with high elastic modulus

Mechanical Performance and Microstructure of Ultra-High-Performance Concrete Modified by Calcium Sulfoaluminate Cement

Study of ultra-high-performance concrete containing multivariate supplementary cementitious materials: experiments and modeling

Effect of curing regimes on the rheological, mechanical, hydration and microstructure of ultra-high-performance concrete (UHPC) using indigenous resources: progress towards sustainable construction practices

Effect of Cement Substitution by Limestone on the Hydration and Microstructural Development of Ultra-High Performance Concrete (UHPC)

Uncovering the Effect of Fly Ash Cenospheres on the Macroscopic Properties and Microstructure of Ultra High-Performance Concrete (UHPC)

Mechanical properties and microstructure of ultra-high performance concrete with low cement content

Effects of Curing Conditions on the MECHANICAL and Microstructural Properties of Ultra-High-Performance Concrete (UHPC) Incorporating Iron Tailing Powder

Combined Curing As a Novel Approach to Improve Resistance of Ultra-High Performance Concrete to Explosive Spalling under High Temperature and Its Mechanical Properties

Investigation of the use of waste mineral additives in ultra-high-performance concrete

Uncovering the role of superplasticizer in developing nano-engineered ultra-high-performance concrete

Effect of concrete mixing plant sludge powder on properties of ultra-high performance concrete

Ultra-high performance concrete prepared with ceramic polishing waste: Hydration, microstructure and mechanical property

Comparative Study on the Chemical and Physical Filling Effects of Binder Materials in Green Ultra-High Performance Concrete and Ultra-High Performance Concrete