Abstract:Thermal treatment is a mainstream technique to separate plastic components from waste crystalline silicon (c-Si) photovoltaic (PV) modules. In this study, the thermogravimetric analysis (TGA) was conducted for a better understanding of the characteristics of plastic components mainly poly(ethylene-co-vinyl) acetate (EVA) binder and polyfluoroethylene composite membrane (TPT) backsheet in waste c-Si PV panels through thermal treatment at four different heating rates (5-20°C·min-1) under nitrogen and air conditions, respectively. The thermal process of the EVA binder whether in a nitrogen or air atmosphere could be divided into two phases, which were 300-400°C and 400-515°C in nitrogen with the total weight loss reached 99.64%; the two phases in the air were 270-405°C and 405-570°C with the total weight loss was 99.68%. The thermal weight loss of TPT in nitrogen has only one phase occured between 380°C and 520°C, and the weight loss rate is about 83%. There are two weight loss phases in the air atmosphere, which the first phase starts from 265°C to 485°C and the second phase ends at 635°C with a final weight loss reaching 97%. Furthermore, the Kissinger-Akahira-Sunose (KAS) method was chosen to calculate the pyrolysis kinetic parameters. The activation energy for EVA in nitrogen (261.16 kJ·mol-1) was higher than in air (209.04 kJ·mol-1), also the TPT in nitrogen (188.28 kJ·mol-1) higher than in air (172.21 kJ·mol-1). That indicated that the thermal decomposition of EVA binder was accelerated at first phase in nitrogen, but there is little difference in air atmosphere. Moreover, the activation energy of PVF of the TPT backsheet in the first phase was lower than that in the second phase. This study provides the fundamental basis to develop efficient thermal separation for the plastic components EVA and TPT in waste PV panels.Implications: This study mainly aims to explore the thermal separation of plastic components of waste c-Si panels for heating treatment, so that developing an accurate heat treatment approach that is efficient to implement for the separation of secondary raw material i.e., glass and silicon wafer from end-of-life PV panels. Therefore, this research findings have significant implications for providing the basic data support for waste PV panels management recycling standards, specifications, or policy documents.

Photothermal performance of vitreous products from high-temperature melting of hazardous waste

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Enhancing sustainable valorization: Harmless synergistic melting treatment for high-value vitreous products from MSWI fly ash and electrolytic manganese residue

Microwave plasma torches for solid waste treatment and vitrification

Nanophotonic-Engineered Photothermal Harnessing for Waste Heat Management and Pyroelectric Generation.

Hybrid Thermochemical Sorption Seasonal Storage for Ultra-Low Temperature Solar Energy Utilization

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

Research on calcination thermal decomposition process of simulated high-level liquid waste based on two-step vitrification

High-Temperature Sensible Heat-Based Thermal Energy Storage Materials Made of Vitrified MSWI Fly Ashes

Critical analysis of enhanced photovoltaic thermal systems: a comparative experimental study of PCM, TEG, and nanofluid applications

[Study on Vitrification of Simulated Medical Wastes by Thermal Plasma].

Velocity field measurement and heat transfer characteristics of the melting process under constant heat flux

Experimental Study on Thermal Performance of a Mobilized Thermal Energy Storage System: A Case Study of Hydrated Salt Latent Heat Storage

Exploring the Mechanism, Advancements, and Application of Thermogalvanic Effect in Hydrogels

Ultra-high power laser for vitrification of borosilicate glass

Theoretical Study of a Novel Intermediate Temperature Photovoltaic/thermal System Equipped with Heat Pipe and Evacuated Tube

Thermal performance analysis of the novel medium-depth borehole heat exchanger (MDBHE) coupled photovoltaic photothermal (PV/T) heat pump domestic hot water supply system

Non-Imaging Optics for Improving Waste Heat Collection with Thermoelectrics

Effective disposal of hazardous waste from non-ferrous waste recycling through thermal treatment

Application of high temperature phase change materials for improved efficiency in waste-to-energy plants

Thermal separation of plastic components from waste crystalline silicon solar cells: Thermogravimetric characteristics and thermokinetics