Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. In order to reduce the adverse effects of structural errors on a novel 5-degrees of freedom (DOF) parallel kinematic mechanism (PKM) with subclosed loops, studies on the elastodynamic modeling and structural error compensation are conducted in this paper. First, considering that introduction of subclosed loops significantly increased the complexity and difficulty of elastodynamic modeling, an equivalent unit modeling method for the branch chain with subclosed loop is proposed based on force analysis and deformation compatibility condition. Then, elastodynamic model of the whole 5-DOF PKM is established with the matrix structural analysis based method. Second, by defining a six-dimensional error (three translational errors and three rotational errors) for each node, structural error model of the PKM is constructed based on closed-loop vector method. To consider the coupling effects of static and dynamic structural errors, the dynamic structural errors derived by above elastodynamic model would be substituted into the structural error model along with given static structural errors. Finally, structural error compensation optimization model is established and structural errors are compensated by adjusting the driven parameters based on the improved particle swarm optimization (PSO) algorithm. Numerical simulations are conducted to verify the proposed elastodynamic modeling and structural error compensation methods. After compensation, the position errors along x, y, and z directions are respectively decreased by 68.036%, 81.409%, and 90.625%, and the angle errors around x and y directions are respectively decreased by 91.426% and 62.042%.

Error Modeling and Analysis of a Spherical Parallel Mechanism with a Multiloop Circuit Incremental Method

Error Modeling of Parallel Robots for Semi-Physical Simulation Platform of Space Docking Mechanism

Error Analysis and Modeling of Monolithic Micromanipulator

Error Modeling and Sensitivity Analysis of A 3-P(pa)s Parallel Type Spindle Head with Parallelogram Structure

Error Sensitivity Analysis of a 1T2R Kinematically Redundant Parallel Mechanism with Closed-Loop Chain

Error modeling and sensitivity analysis of a novel 5-degree-of-freedom parallel kinematic machine tool

Error Modeling and Sensitivity Analysis of A Parallel Robot with Scara(Selective Compliance Assembly Robot Arm) Motions

Geometric Modeling and Error Propagation Analysis of an Over-Constrained Spindle Head with Kinematic Interactions

Dynamic Accuracy Analysis of a 5PSS/UPU Parallel Mechanism Based on Rigid-Flexible Coupled Modeling

Dynamic modeling of spatial parallel mechanism with multi-spherical joint clearances

Error Modeling and Sensitivity Analysis of a Parallel Robot with R-(SS)2 Branches

Design of a spherical parallel mechanism with controllable center of rotation using a spherical reconfiguration linkage

Kinematical Error Analysis and Identification of a 3-PRS Parallel Mechanism

Error modeling and accuracy evaluation of parallel manipulators with mixed DoFs based on motion/force transmissibility and constrainability

Design principles and kinematic analysis of a novel spherical 2-degree-of-freedom (DOF) parallel mechanism

Elastodynamic modeling and structural error compensation for a 5-DOF parallel mechanism with subclosed loops

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

A New Kinematic Error Modelling and Identification Method of the Parallel Manipulator

Study Of Error Modeling In Kinematic Calibration Of Parallel Manipulators

Modeling and Analysis of a Novel 3R Parallel Compliant Mechanism

Position error modeling and accuracy evaluation of n-DoF translational parallel manipulators that can be transformed into n four-bar mechanisms based on motion/force transmissibility