Abstract:This paper presents a WR-2.2 band (330-500 GHz) waveguide with E-plane bends and a waveguide bandpass filter. A micro-metal additive manufacturing technology employs copper to process these devices. This technology includes several micromachining processes, which can produce integrated, miniaturized, and complex three-dimensional metal microstructures when meeting the process constraints. To successfully apply this technology to the fabrication of terahertz waveguide devices, many design details are considered. First, the E-plane bent transition structures in the waveguide overcome size limitations imposed by the manufacturing process, allowing for accurate measurement using standard waveguide interfaces. Second, the rectangular resonators compose the fifth-order waveguide bandpass filter spanning 20 GHz with a center frequency of 380 GHz. Given that the excess photoresist needs to be removed, some release holes are designed in the proper positions of the filter. Third, to increase the uniformity of the device layout and improve the machining quality in the electroforming process, a lot of rectangular holes are arranged around the device. By adopting a meticulous and novel design method in accordance with the process advantages and limitations, the fabrication accuracy of the device size is greatly increased. The integrated filter with exceptional performance is obtained. The measured average insertion loss within the passband is better than 1.2 dB, and the return loss exceeds 15 dB. Additionally, the filter demonstrates a center frequency offset of approximately 0.5%. Good consistency between simulation and measurement shows the validity of design and fabrication.

Analysis and Validation of Fabrication and Assembly Effects on Terahertz Waveguide Bandpass Filter

Design of multilayer triangular substrate integrated waveguide filter in LTCC

WR‐1.5 (500–750 GHz) Waveguide Bandpass Filter Fabricated Using High Precision Computer Numerically Controlled Machining

400 GHz Easy-Packaging Waveguide Filters Based on Mixed-Mode and Off-Axis Couplings

A 0.9-THz Integrally Manufactured High-Precision Waveguide Cavity Filter Using Electrochemical Micromachining Technology

Copper Micromachined WR‐2.2 Band Waveguide and Bandpass Filter

A W-Band Chebyshev Waveguide Bandpass Filter with Wide Stopband Performance

Effect of fabrication tolerance on 0.346 THz double corrugated waveguide for backward wave oscillators

Design of a 300GHz Cross-coupled Waveguide Filter

A 3D Printed 300 GHz Waveguide Cavity Filter by Micro Laser Sintering

Microfabrication of a Dual-Mode Rectangular Waveguide Filter

Four‐hundred Gigahertz Broadband Multi‐branch Waveguide Coupler

Terahertz narrow-band filter based on 3D-printed periodic waveguides

A Design Method to Realize Manufacture-Friendly Millimeter-Wave Folded Substrate Integrated Waveguide Bandpass Filters

Waveguide Bandpass Filter Design for Millimeter-Wave Front-End System

Design and Experimental Verification of Terahertz Wideband Filter Based on Double-Layered Metal Hole Arrays

A 3-D Printed Ku-Band Waveguide Filter Based on Novel Rotary Coupling Structure

Fabrication and characterization of THz plasmonic filter

Design and Fabricate of Terahertz Groove Gap Waveguide Filter

Accurate Design of High Tc Superconducting Microstrip Filter at UHF Band for Radio Astronomy Front End

The design and fabrication of RF band pass filter by LTCC technology