Additively Manufactured Wideband Low-Profile Bidirectional 2-D Beam-Scanning Antenna Using Double Folded Transmitarrays with Curved Polarizers

Zhenjun Zhai,Feng Lin,Yang,Houjun Sun

DOI: https://doi.org/10.1109/tap.2023.3322553

IF: 5.7

2023-01-01

IEEE Transactions on Antennas and Propagation

Abstract:This paper presents a wideband low-profile bidirectional two-dimensional (2-D) beam-scanning antenna for millimeter-wave applications. It achieves independently controlled bidirectional beams by two orthogonally mirrored folded transmitarrays (TAs) overlapping in space, significantly reducing the antenna profile. The folded TA consists of a feed source, a curved polarizer and a receive-transmit (R-T) array. The feed source is realized by an all-metal wideband miniaturized magnetoelectric (ME) dipole based on the metal 3D-printing technique. The curved metal grating acts as a polarizer, which achieves reflection and transmission for y-polarized and x-polarized waves, respectively. Using the additively manufactured electronics (AME) technique, the R-T array element is realized by two wideband tightly coupled bow-tie dipole antennas connected by a pair of differential microstrip-line phase shifters with true-time delay and continuous 360° tuning range. Finally, 2-D beam scanning with constant beam direction across the operation band is achieved by adjusting the polarizer along the x - and y-directions. The height diameter ratio ( H/D ) is 0.5, while the measured 2-D bidirectional beam scanning range covers ±10° in both the E- and H-planes within 27 ~ 39 GHz, with a maximum scan loss of 1.9 dB. The measured peak gain is 27.1 dBi, and the maximum aperture efficiency is 53.4%. The measured 1-dB and 3-dB overlapped gain bandwidths for 0° and 180° beams are 30 ~ 36.2 GHz (18.7%) and 27~40 GHz (38.8%), respectively.