Abstract:Modern coating systems are increasingly deploying nanomaterials which offer improved thermal performance. The optimization of these systems can benefit from more elegant fluid dynamic models of the coating process. Inspired by these advancements, the present investigation introduces a novel mathematical model to analyze the boundary layer transport in Al 2 O 3 -Cu-H 2 O hybrid binary nanofluid coating deposition on an exponentially stretching porous substrate (sheet). Lateral mass flux (suction) at the wall is also considered a heat source (generation) for hot spot manufacturing effects. To add further sophistication to the thermal conduction model, a non-Fourier approach is adopted which accurately incorporates thermal relaxation effects i.e. the Cattaneo-Christov heat flux (CCHF) model. The Tiwari-Das volume fraction nanoscale formulation is implemented for different combinations of Alumina (Al 2 O 3 ) and Copper (Cu) metallic nanoparticles in an aqueous base fluid (H 2 O). Hydrodynamic wall and thermal slip are also included as they feature in coating processes. The fundamental equations governing mass, momentum, and energy conservation, along with the corresponding conditions at the wall (substrate) and free stream, are made dimensionless through suitable scaling similarity transformations. The resulting nonlinear coupled ordinary differential boundary value problem is subsequently addressed using the efficient MATLAB bvp4c routine. Special cases of the non-Fourier model are validated against published results, and the general model is further confirmed through validation using an Adams-Moulton 2-step predictor-corrector algorithm (AMPC). Furthermore, dual solutions of the generalized model are extracted and visualized. A comprehensive study of the effects of key thermophysical key parameters on momentum and thermal characteristics (velocity, temperature, skin friction and local Nusselt number) is conducted and solutions are visualized graphically. The computations show that higher temperatures are present with intensification in the thermal relaxation parameter (Cattaneo-Christov hyperbolic model parameter), which predicts therefore larger temperatures than the classical Parabolic heat conduction model using Fourier analysis. Effectively, thermal relaxation is responsible for finite heat wave propagation and produces more accurate estimations of heat transfer than the Fourier model. An increase in stretching parameter enhances the skin friction coefficient and elevates the local Nusselt number. As the thermal relaxation parameter increases, the temperature magnitudes corresponding to the first and second solutions are both enhanced as are thermal boundary layer thicknesses. An increase in wall suction induces an escalation in the first solution for velocity whereas it reduces the second solution velocity. Stronger wall suction suppresses temperatures. With increasing thermal slip, the boundary layer is cooled i.e. temperature plummets and thermal boundary layer thickness is decreased. Strong deceleration is induced with greater hydrodynamic (velocity) slip. Both first and second solutions for skin friction are elevated with shrinking whereas they are depressed with stretching. With greater velocity slip both the first and second solutions for skin friction are depleted with greater velocity slip for the shrinking case, whereas they are generally enhanced for the very strong stretching case. The computations offer some new insights into multi-physical thermal fluid dynamics of nanofluid-based coating systems.

Thermal and Solutal Slip Impacts of Tribological Coatings on the Flow and Heat Transfer of Reiner-Philippoff Nanofluid Lubrication Toward a Stretching Surface: the Applications of Darcy-Forchheimer Theory

Heat Transmission of Engine-Oil-Based Rotating Nanofluids Flow with Influence of Partial Slip Condition: A Computational Model

Thermal Analysis of Radiative Darcy-Forchheimer Nanofluid Flow Across an Inclined Stretching Surface

Significance of Thermal Slip and Convective Boundary Conditions in Three Dimensional Rotating Darcy-Forchheimer Nanofluid Flow

Regression modeling of Bödewadt slip flow dynamics involving Reiner-Rivlin nanofluid based on a modified Buongiorno approach

Darcy–Forchheimer higher-order slip flow of Eyring–Powell nanofluid with nonlinear thermal radiation and bioconvection phenomenon

Darcy-Forchheimer flow with viscoelastic Cattaneo-Christov heat flux model and nonlinear thermal radiation: A numerical investigation

Heat Transfer Analysis of Magneto-Eyring–powell Fluid over a Nonlinear Stretching Surface with Multiple Slip Effects: Application of Roseland’s Heat Flux

Radiation, Velocity and Thermal Slips Effect Toward MHD Boundary Layer Flow Through Heat and Mass Transport of Williamson Nanofluid with Porous Medium

Numerical exploration of the features of thermally enhanced chemically reactive radiative Powell–Eyring nanofluid flow via Darcy medium over non-linearly stretching surface affected by a transverse magnetic field and convective boundary conditions

Managing heat transfer effectiveness in a Darcy medium with a vertically non-linear stretching surface through the flow of an electrically conductive non-Newtonian nanofluid

Tribological perceptions into shear thinning fluid flow: A quantitative analysis using rotating disk phenomenon

Applications of Nano-biofuel cells for Reiner-Philippoff nanoparticles with higher order slip effects

Thermal and Concentration Slip Analysis on Heat and Mass Transfer in Magnetic-Driven Dissipative Nanofluid Across Stretched Sheet for High Temperature Difference

Stagnation point slip flow of Al2O3/γ-Al2O3 nanofluids subject to Lorentz force and nonlinear thermal radiation over a stretching sheet

Slippery flow of non-Newtonian Maxwell thermal nanofluid past a permeable vertically stretched sheet through a porous medium

Optimization and Sensitivity Analysis of Heat Transfer for Powell–Eyring Fluid Between Rotating Rolls with Temperature-Dependent Viscosity: A Mathematical Modeling Approach

Numerical and Scale Analysis of Non-Newtonian Fluid (Eyring-Powell) Through Pseudo-Spectral Collocation Method (PSCM) Towards a Magnetized Stretchable Riga Surface

Darcy–Forchheimer flow of Carreau fluid over a curved stretching surface with slip condition and variable thermal conductivity

Numerical study of hybrid binary Al2O3-Cu-H2O nanofluid coating boundary layer flow from an exponentially stretching/shrinking perforated substrate with Cattaneo-Christov heat flux, heat source, suction and multiple slip effects

A numerical study of heat and mass transfer characteristic of three-dimensional thermally radiated bi-directional slip flow over a permeable stretching surface