Abstract:According to California's 2016 Building Energy Efficiency Standards, the percentage flicker of light-emitting diode (LED) lighting fixtures should be below 30%. However, the percentage flicker of commercially available linear power supplies is generally between 25% and 99.9%; thus, some LED lighting fixtures that use linear power supplies have been unable to enter the European or American markets. The traditional method of effectively reducing flicker involves increasing the capacitance of the electrolytic capacitor of the power supply, which causes an increase in the height of the lamp board components as well as shadowing and dark band phenomena. This paper presents a power supply circuit that uses only electrolytic capacitors with low capacitance and exhibits constant power, constant light output, and a lamp board thickness of only 8 mm; it can achieve a percentage flicker of less than 10%, which exceeds international standards. Power efficiency is a crucial performance indicator of linear power supplies. Because linear power supplies are mostly integrated circuits (ICs) with extremely small package volumes, higher power efficiency results in lower heat loss. The international standard for the power efficiency of linear power supplies is approximately 75%. A multistage switching mechanism is used in the proposed power supply to achieve an overall efficiency of > 88%. Under an input power of 12 W, a 10% increase in efficiency reduces the heat by 1.2 W, which can considerably reduce the difficulty and cost of heat dissipation in IC packages. By combining the aforementioned technologies, the proposed power supply can achieve high efficiency and low percentage flicker, thereby improving the shortcomings of traditional linear power supplies. Currently, the driver-on-board (DO- ) module of the proposed power supply is in the trial production phase, and its market entry will be accelerated to expand the market share of linear power supplies.

Sinusoidal Pulsewidth Modulation Scheme for LED Lighting to Reduce LED Flicker

A High Efficiency Step-Up WLED Driver with Wide Range PWM Dimming

A Capacitorless and Low‐Optical‐Flicker AC Direct LED Driving IC and System Applied to Street Lighting

An LED driver with thermal control function

Design of a LED Driver Applied for TRIAC Dimmers with Primary Constant Current Control

A Dimmable and Power-Compensated AC Direct LED Driver with High Efficiency

A Quantitative Dimming Method for LED Based on PWM

A Novel Zvs Double Switch Flyback Inverter and Pulse Controlled Dimming Methods for Flat Dbd Lamp

An Intelligent Control of LED Street Lamp Based on Temperature Sensing

Analysis of Energy Saving Ability in Dimming VLC Systems Using LEDs with Optimized SAHP

A Method of Reducing the Peak-to-Average Ratio of LED Current for Electrolytic Capacitor-Less AC–DC Drivers

Optimization of Illumination Performance of Trichromatic White Light-Emitting Diode and Characterization of Its Modulation Bandwidth for Communication Applications

Ultra-Low Percentage Flicker High-Efficiency Direct AC LED Driver Using Constant Power Technology

A Feed-forward Scheme to Reduce Output Current Ripple of an Electrolytic Capacitor-less AC/DC LED Driver

A White LED Driver Based on Dual Mode Switch Dimming

Simple Digital PWM and PSM Controlled DC-DC Boost Converter for Luminance-Regulated WLED Driver

Explore Luminance Attenuation and Optical Crosstalk of RGB Mini Light-Emitting Diode Via Microscopic Hyperspectral Imaging

A Chromatic Aberration Correction Method for RGB LED Based on PWM

Optimization of LED's SAHPs to Simultaneously Enhance SNR Uniformity and Support Dimming Control for Visible Light Communication

A Digital Multiplexing and Real-Time Refresh Dimming Control Circuit Used in LED Driver for Multiple LED Strings

Low blue light hazard for tunable white light emitting diode with high color fidelity and circadian performances